You Can Measure the Benefits… Training Course Introduction to SmartScan

You Can Measure the Benefits… SmartScan 25  SmartScan 25 is a four ‑ wire, low ‑ voltage device, and is available with a customized graphic LCD display. SmartScan has two major components:  The main control unit  The sensor (connected via a cable). SolidScan

You Can Measure the Benefits… Electronic  What do we get ?  5 independent SPDT relays  AC/DC Power supply  Communication:  4 – 20mA, RS / 485  Advanced calculations:  Volume  Kg  Totalization SmartScan 25

You Can Measure the Benefits…  SmartScan 25 can be used in the following applications:  Solid applications  Long range liquid applications  Aggregates  Dust SmartScan 25 Applications

You Can Measure the Benefits… SmartScan 25 Models SmartScan 25 Standard (L,O,S) SmartScan 25 Long Range (L,O,S) Liquid 0.6m - 25m 1.96ft – 82.02ft 0.6m – 40m 1.96ft – ft Open Channel 0.6m - 25m 1.96ft – 82.02ft 0.6m – 40m 1.96ft – ft Solid 0.6m - 20m 1.96ft – 65.61ft 0.6m – 30 m 1.96ft – 98 ft

You Can Measure the Benefits… SmartScan 25  SmartScan 25 has a range of up to 40 m ( ft)  An accuracy of 0.25% within that range  Resolution of 1 mm (0.03") Accuracy & Resolution

You Can Measure the Benefits… SmartScan 25  Low energy transducer After transmission, the transducer will detect several echoes from the target. The statistical calculation will be based on these echoes, giving a more accurate average. 25KHz sensor

You Can Measure the Benefits… 25 kHz Sensor ’ s recommendations (all ranges) E-CTFE Coated Aluminum  Designed for complex environments with problematic echo, such as non- conductive vapors or liquids  Good performance in problematic applications  High resistance in acid and alcoholic environments  Available housing material PP/PVDF SmartScan 25

You Can Measure the Benefits…  All CE sensors are supplied with either pre cut cable or with flexible cable.  EX sensors supplied with fixed length.  Pre cut cables are offered at various length, as indicated in the User ’ s manual and price list.  Flexible length supplied with 5 m/16.4ft loose-end cable and can be adjusted according the table in the next page.  Sensor cable specifications: 4 wires, 0.75 mm ² overall shielded, compatible to HELUKABEL P.N ( SmartScan 25 and 50 Sensor cable recommendations

You Can Measure the Benefits… SmartScan 25 and 50 Can be changed to a range of 5m/16.4ft to 50m/164ft 50m/164ft to 100m/328ft 100m/328ft to 150m/492ft 150m/492ft to 200m/656ft Flexible cables for 25 KHz and 50KHz sensors Can be changed to a range of 5m/16.4ft to 100m/328ft 100m/328ft to 200m/656ft 50 KHz sensor cable25 KHz sensor cable Note: All sensors are supplied with a 5 m’ loose-end cable when ordering flexible cables.

You Can Measure the Benefits… 25 KHz IS Sensors (all ranges) Hazardous area Installation:  Max. cable length between unit and barriers: Up to 25m (82ft)  Max. cable length between sensor and barriers: Up to 75m (246ft) SmartScan 25

You Can Measure the Benefits… SmartScan 25 Fixed cables length for 25 KHz EX sensors 25 KHz EX sensor cable Fixed cable length 25m/82ft 50m/164ft 75m/246ft 100m/328ft

You Can Measure the Benefits…  High added value – supplied with 4 – 20mA, 5 independent SPDT relays, RS or RS – 485, Modbus  Embedded software configuration for advanced calculations – Volume, Kg, Totalization  Accurate average calculations of uneven surfaces  Light equipment – simple to install and easy to handle  Ranges of up to 40m (131.23ft) SmartScan 25 Benefits

You Can Measure the Benefits… SmartScan 50  SmartScan 50 is a four ‑ wire, high ‑ voltage device, and is available with a customized graphic LCD display. SmartScan has two major components:  The main control unit  The sensor (connected via a cable). SolidScan

You Can Measure the Benefits… SmartScan 50  What can we get ?  5 independent SPDT relays  AC/DC Power supply  Communication:  4 – 20mA, RS / 485  Advanced calculations:  Volume  Kg  Totalization (for open channels)  Sum (for roll applications) Electronic

You Can Measure the Benefits…  SmartScan 50 can be used in the following applications:  Open Channel/Flow  Liquid applications where the filling/emptying is rapid  Solid applications where very precise measurement is required  Diameter, to measure roll thickness SmartScan 50 Applications

You Can Measure the Benefits… SmartScan 50 Models SmartScan 50 L for Liquid SmartScan 50 S for Solid SmartScan 50 D for Diameter SmartScan 50 O for Open Channel 0.4m - 12m 1.31ft ft 0.4m - 8.5m 1.31ft – 27.88ft 0.5m - 3m 1.64ft – 9.84ft 0.4m - 12m 1.31ft ft Accuracy 0.2% Accuracy 0.25% Accuracy 0.1% Accuracy 0.2%

You Can Measure the Benefits… SmartScan 50  SmartScan 50 has a range of up to 12 m (39.37 ft)  An accuracy of up to 0.25% within that range  Resolution of 1 mm (0.03") Accuracy & Resolution

You Can Measure the Benefits…  High energy transducer After transmission the transducer will detect the strongest echo from target. 50 KHz sensor is mostly suitable for flat surfaces or aggregates, where the achieved result will be more accurate. SmartScan 50 50KHz sensor

You Can Measure the Benefits…  Glass reinforced epoxy  Used in complex and difficult applications such as narrow pipes, steps, or any other place with many obstructions or interferences  For high resolution results  For accurate reading in non- linear surfaces  For liquids and solids applications. 50 kHz Sensor’s recommendations SmartScan 50

You Can Measure the Benefits…  High added value – supplied with 4 – 20mA, 5 independent SPDT relays, RS or RS – 485  Embedded software configuration for advanced calculations-  Volume, Kg, Totalization and sum.  Preprogrammed default settings  Rapid response with high accuracy  Available with glands or conduit adaptors SmartScan 50 Benefits

You Can Measure the Benefits… Certificates  SmartScan50 is compliant with the following industry standards:  CE – EMC  FM – 3810 (unclassified)  NI: Class I, II, III, Division 2 Group A, B, C, D, E, F and G  For use in zone 2 without barrier SmartScan50 Control Unit

You Can Measure the Benefits… Certificates  50KHz sensor  ATEX: EEx mb II T4  For use in zone 1 without barrier (gas & dust)  FM: DIP, Class I, II, III, Division 2 Group A, B, C, D, E, F and G  NI: Class I, II, III, Division 2 Group A, B, C, D, E, F, G SmartScan50 Sensor

You Can Measure the Benefits… Certificates  SmartScan 25 is compliant with the following industry standards:  CE – EMC  FM – 3810 (unclassified)  NI: Class I, II, III, Division 2 Group A, B, C, D, E, F and G  For use in Div 2 without a barrier SmartScan 25 & SmartLite

You Can Measure the Benefits… Certificates  Intrinsically safe  ATEX - EEx ia IIC T4.  For use in Zone 0, 1, 2 with a barrier  FM: Class I, II, III Division 1 Group A, B, C, D, E, F and G  ATEX - EEx mb II T4  For use in Zone 1 without a barrier  Non Incendive and DIP  FM: Class I, II, III Division 2 Group A, B, C, D, E, F and G Sensor 25Khz

You Can Measure the Benefits… SmartScan 25 and 50  When SmartScan is reopened, ensure that you replace the O- ring, in order that the unit will remain sealed. The O-ring is suitable for one use only.  In order to ensure that the unit remains sealed, make sure to use round cables for (glands fitting) with a minimum of 6-7 mm diameter. Important Notes

You Can Measure the Benefits… SmartScan 25 and 50  The sensor should always be mounted above it ’ s dead zone. If the device enter its blocking distance it will not measure correctly.  If possible, the sensor should be centered or at least 0.5m from sidewalls. Important Notes

You Can Measure the Benefits…  The sensor should be placed as far as possible from filling or other noisy inlets.  The sensor should preferably be installed when the tank is empty or at least at the minimum application level.  The sensor should be mount as perpendicular as possible SmartScan 25 and 50 Important Notes

You Can Measure the Benefits… Sensor TypePipe Length Pipe internal Diameter 25 KHz m ( ft)3-6 inch 50 KHz m ( ft)3-6 inch Notes: When using a guided pipe the sensor should be mount at the center of the pipe and the pipe should be parallel to tank’s wall. It is strongly recommended to use Scan Distance when installing through a guided pipe. For any pipe material’s beside plastic please consult factory prior installation. SmartScan 25 & 50 Sensor Installation Via Pipe