Presentation is loading. Please wait.

Presentation is loading. Please wait.

Excom ® Remote I/O in Zone 1. excom ® excom ® One system for all requirements in Zone 1.

Published byHope Wright Modified over 8 years ago

Similar presentations

Presentation on theme: "Excom ® Remote I/O in Zone 1. excom ® excom ® One system for all requirements in Zone 1."— Presentation transcript:

1 excom ® Remote I/O in Zone 1

2 excom ® excom ® One system for all requirements in Zone 1

3 excom ® Supply unit concept System connection Module overview Binary signal detection Analogue signal detection Housings Integration in Asset Management Systems Overall view of technological advantages Content

4 excom ® Supply unit concept Optimezed Power through the use of EEx-e input AC-supplying to the Backplane Design of the Backplane in EEx-m Galvanically isolated power supply of the modules with power restriction

5 excom ® Supply unit concept Power supply either 24 VDC or 115 / 230 VAC Fully redundancy Exchange in Zone 1 during operation 1 Supply unit is sufficient to supply a full equipped module rack

6 excom ® Supply unit concept 24 VDC 1 Supply unit 1 Supplyline 18-33 VDC

7 excom ® Supply unit concept 24 VDC 18-33 VDC 2 Supply unit 1 Supplyline

8 excom ® Supply unit concept 24 VDC 18-33 VDC 2 Supply unit 2 Supplyline 18-33 VDC

9 excom ® Supply unit concept 115 / 230VAC Same possibilities as with 24VDC Upgrade from an existing 24VDC- module rack possible

10 excom ® Supply unit concept mixed supply 115 / 230 VAC and 24 VDC 115 / 230 VAC 18-33 VDC

11 excom ® System connection Intrinsically safe Profibus DP Gateway Profibus DP-V1 Fully redundancy LED indication Hot swappable Configuration over Profibus HART ® -over-Profibus

12 excom ® System connection with copper cable DP SC12EX RS 485RS 485 iS Zone 1  max : 31 devices Control system

13 excom ® System connection with Fibre Optic Cable DP RS 485  max : 31 devices RS 485 iS OC11Ex/3G OC11Ex/2G LWL iS Zone 1 Control system

14 excom ® System connection with Fibre Optic Cable DP RS 485 Link cable Zone 1 LWL iS OC11Ex/3G 2 x OC11Ex/2G OC11Ex/2G RS 485 iS  max : 31 devices Control system

15 excom ® System connection Redundancy possibilities DP SC12EX Zone 1 1 Control system 1 Profibus Master Control system

16 excom ® System connection Redundancy possibilities DP SC12EX DP SC12EX Zone 1 1 Control system 2 Profibus Master Control system

17 excom ® Control system B System connection Redundancy possibilities DP SC12EX DP Zone 1 2 Control systems each 1 Profibus Master Control system A

18 excom ® Module overview AIH40Ex AIH41Ex Other devices in preparation DM80Ex DF20Ex AO40Ex AOH40Ex TI40Ex Modules for: NAMUR-sensors and actuators mechanical contacts temperature sensors, thermocouplers analogue input-/outputs signals HART® -signal transmission DI40Ex DO40Ex AI40Ex AI41Ex

19 excom ® Binary signal detection 8 channels For connection either of NAMUR-sensors and actuators or mechanical contacts Input- and Output channels configurable Designed for connecting low power valves Configurable on/off delay in the range of 2...100 ms possible for each channel In-/output module – DM80Ex

20 excom ® Binary signal detection Input module – DI40Ex 4 channels Galvanic isolation between the channels For connection either of NAMUR sensors or mechanical contacts Configurable on/off delay in the range of 2...100 ms possible for each channel

21 excom ® Binary signal detection Output module – DO40Ex 4 channels Galvanic isolation between the channels automatic adjustment of power in the range of: 10..24 VDC Typical connected loads: 24 V/6 mA 18 V/25 mA 15 V/35 mA 12 V/45 mA

22 excom ® Binary signal detection Frequency module – DF20Ex 2 channels Counter or Frequency input Up to 4 kHz 2 main inputs with 3 control in-/outputs Control inputsfor: - direction detection - reset input - release input

23 excom ® Analogue signal detection Input module – AIH40Ex 4 channels Integrated HART ® Controller For connection of 2-wire- transducer 14 Bit-resolution 0..21 mA is reproduced as a figure between 0 and 21000 Up to 8 HART ® Variables in cyclic communication

24 excom ® Analogue signal detection Input module – AIH41Ex 4 channels Integrated HART ® Controller For connection of 4-wire- transducer 14 Bit-resolution 0..21 mA is reproduced as a figure between 0 and 21000 Up to 8 HART ® Variables in cyclic communication

25 excom ® Analogue signal detection Input module – AI40Ex 4 channels Galvanic isolation between the channels For cennection of 2- and 4- wire-transducers 14 Bit-resolution 0..21 mA is reproduced as a figure between 0 and 21000

26 excom ® Analogue signal detection Input module – AI41Ex 4 channels Galvanic isolation between the channels For connection of 4-wire- transducer Current input 0..21mA Voltage input 0..10,5 V 14 Bit-resolution 0..21 mA is reproduced as a figure between 0 and 21000 0..10,5 V is reproduced as a figure between 0 and 10500

27 excom ® Analogue signal detection Output module – AOH40Ex 4 channels Integrated HART ® Controller For connection of 0/4..20 mA actuators 12 Bit-resolution 0..21 mA is reproduced as a figure between 0 and 21000 Up to 8 HART ® Variables in cyclic communication

28 excom ® Analogue signal detection Output module – AO40Ex 4 channels Galvanic isolation between the channels For connection of 0/4..20 mA actuators 13 Bit-resolution 0..21 mA is reproduced as a figure between 0 and 21000 At connected HART ® devices the parameterization will be done direct on the device

29 excom ® Analogue signal detection Temperature module – TI40Ex 4 channels Galvanic isolation between the channels Resistant- or thermocoupler measurement 16 Bit-resolution 0,1 K per Digit from 0 Kelvin upwards Channelwise external cold junction compensation or internal for all

30 excom ® Housings Using in Zone 1 Stainless steel cabinet with window Mounting rail for module rack 2 Cu-shield bus Flange plate with cable glands Mounting of 1 x MT18 or 2 x MT9 IP65

31 excom ® Housings with system approval

32 excom ® Housings with system approval Temperature calculation with Excel Download from www.turck.com Selection of the used modules Automatic calculation of the power consumption Selection of the max. ambient temperature

33 excom ® Housings with system approval

34 excom ® Housings with system approval

35 excom ® Housings customerized solutions

36 excom ® Housings customerized solutions

37 excom ® Emerson AMS ® Suite FDT/DTM Technology Integration in Asset Management Systems

38 excom ® DTM’s HART ® Communication with FDT/DTM

39 excom ® HART ® Communication with FDT/DTM As with PACTware ® Download from PACTware ® (www.turck.com) Download of the DTMs from the sites of the manufactors Installation of PACTware ® and DTMs Build up a project: → CommDTM → excom ® DTM → Geräte DTMs Start!

40 excom ® HART ® Communication with FDT/DTM

41 excom ® Integration in Emerson AMS ® suite

42 excom ® Overall view of technological advantages Non-restrictive Power redundancy in Zone 1 Gateway redundancy Status Indication via LED Hot Swap for all components in Zone 1 Minor volume dimensions

43 excom ® Overall view of technological advantages One binary output module for quite all intrinsic safe valves One temperature module für all current temperature sensors and thermocpouplers Continuous HART ® Ccmmunication

44 excom ® Thank you very much for your kind attention. For any further questions, do not hesitate to contact us: TURCK TEAM PROCESS AUTOMATION pa@turck.com

Download ppt "Excom ® Remote I/O in Zone 1. excom ® excom ® One system for all requirements in Zone 1."

Similar presentations

Basic Jens Neigaard.

Basic Jens Neigaard.
Asahi/America New Positioners: Pneumatic Actuators-Westlock P-10,K-10 Electric Actuators-Peaktronics-DHC- 100 Competitor Comparison Positioners.

Asahi/America New Positioners: Pneumatic Actuators-Westlock P-10,K-10 Electric Actuators-Peaktronics-DHC- 100 Competitor Comparison Positioners.
Module 4: Analog programming blocks. Module Objectives Analyze a control task that uses analog inputs. Connect a potentiometer to LOGO! controller and.

Module 4: Analog programming blocks. Module Objectives Analyze a control task that uses analog inputs. Connect a potentiometer to LOGO! controller and.
3U ATCA Shelf October 2007 -Proprietary and Confidential-

3U ATCA Shelf October Proprietary and Confidential-
Active Stations PC PLC PROFIBUS Passive Stations (Field Devices)

Active Stations PC PLC PROFIBUS Passive Stations (Field Devices)
File/ 1 Primary colours Secondary colours Remember to change file name 28pt Ariel bold 18pt Ariel bold l Distributed PID Control and I/O 2500 - What is.

File/ 1 Primary colours Secondary colours Remember to change file name 28pt Ariel bold 18pt Ariel bold l Distributed PID Control and I/O What is.
CR1000s are only one part of a data acquisition system. To get good data, suitable sensors and a reliable data retrieval method are required. A failure.

CR1000s are only one part of a data acquisition system. To get good data, suitable sensors and a reliable data retrieval method are required. A failure.
DP Cabinet.

DP Cabinet.
You Can Measure the Benefits… Training Course Introduction to SmartScan.

You Can Measure the Benefits… Training Course Introduction to SmartScan.
CR1000s are only one part of a data acquisition system. To get good data, suitable sensors and a reliable data retrieval method are required. A failure.

CR1000s are only one part of a data acquisition system. To get good data, suitable sensors and a reliable data retrieval method are required. A failure.
PROGRAMMABLE LOGIC CONTROLLERS PLC’S

PROGRAMMABLE LOGIC CONTROLLERS PLC’S
AS-i, The Simplest Automation Networking Solution Dated: 10/30/2008.

AS-i, The Simplest Automation Networking Solution Dated: 10/30/2008.
Moeller GmbH BU Circuit Breaker Protective note to rule DIN ISO 16016 is to be considered The new line of circuit breaker IZM ILS-P / W. Wagner Aug 03,

Moeller GmbH BU Circuit Breaker Protective note to rule DIN ISO is to be considered The new line of circuit breaker IZM ILS-P / W. Wagner Aug 03,
Setup Guide - Profibus communication AC141x with Step 7 V5.5 English

Setup Guide - Profibus communication AC141x with Step 7 V5.5 English
MUST HAVE SHOULD HAVE COULD HAVE Module # 010. Qi Hardware Objectives Recognize hardware Know how to interface to field equipment Know the 4 different.

MUST HAVE SHOULD HAVE COULD HAVE Module # 010. Qi Hardware Objectives Recognize hardware Know how to interface to field equipment Know the 4 different.
The Interface Solution Experts www.miinet.com Intrinsically Safe Design, TCM installs in: Class I, II, & III Div 1 and 2 (Zones 0/1 & 2) Up to 32 Channels.

The Interface Solution Experts Intrinsically Safe Design, TCM installs in: Class I, II, & III Div 1 and 2 (Zones 0/1 & 2) Up to 32 Channels.
1  Module Type Overview  Construction  Characteristics  Installation principles  Details PD 600-Series.

1  Module Type Overview  Construction  Characteristics  Installation principles  Details PD 600-Series.
Advantys® STB High Density Discrete I/O Modules. AGP - English 2 Advantys® STB Advantys STB delivers customer value in distributed I/O Smart Built-in.

Advantys® STB High Density Discrete I/O Modules. AGP - English 2 Advantys® STB Advantys STB delivers customer value in distributed I/O Smart Built-in.
Alarmline Linear Heat Detection

Alarmline Linear Heat Detection
ENGINEERING APPLICATIONS Telecommunication Long Distance Communication Handle large number of channels Signalling purposes Computer Networks Connecting.

ENGINEERING APPLICATIONS Telecommunication Long Distance Communication Handle large number of channels Signalling purposes Computer Networks Connecting.

Similar presentations

Ads by Google