Geometry Formulas in Three Dimensions

Slides:



Advertisements
Similar presentations
Space Figures and Cross Sections
Advertisements

Solid Geometry.
Geometry 3 Dimension.
By: Andrew Shatz & Michael Baker Chapter 15. Chapter 15 section 1 Key Terms: Skew Lines, Oblique Two lines are skew iff they are not parallel and do not.
Lesson 8.1A: Three Dimensional Objects, Nets, and Cross-Sections
CONFIDENTIAL 1 Geometry Surface Area of Prisms and Cylinders.
Geometry Surface Area of Pyramids and Cones
Geometry Volume of Pyramids and Cones
Holt Geometry 10-3 Formulas in Three Dimensions 10-3 Formulas in Three Dimensions Holt Geometry Warm Up Warm Up Lesson Presentation Lesson Presentation.
Geometry Chapter 20. Geometry is the study of shapes Geometry is a way of thinking about and seeing the world. Geometry is evident in nature, art and.
Three-Dimensional Figure A three-dimensional figure is a shape whose points do not all lie in the same plane.
10-1 Introduction to Three-Dimensional Figures Warm Up
Surface Area of 12-3 Pyramids and Cones Warm Up Lesson Presentation
1-7 Three Dimensional Figures
Unit 9 Understanding 3D Figures
Geometry The strand of math that deals with measurement and comparing figures, both plane and solid .
Attributes A quality that is characteristic of someone or something.
Warm Up Find the perimeter and area of each polygon.
Formulas in Three Dimensions
Space Figures Mr. J. Grossman. Space Figures Space figures are three-dimensional figures or solids. Space figures are figures whose points do not all.
VOLUME Volume is a measure of the space within a solid figure, like ball, a cube, cylinder or pyramid. Its units are at all times cubic. The formula of.
Warm Up Find the unknown lengths.
Warm Up Find the missing side length of each right triangle with legs a and b and hypotenuse c. 1. a = 7, b = c = 15, a = 9 3. b = 40, c = 41 4.
Holt CA Course Three-Dimensional Figures Warm Up Warm Up Lesson Presentation Lesson Presentation California Standards California StandardsPreview.
7.1 Three- Dimensional Figures I can classify and draw three-dimensional figures.
Geometry Review Solid Geometry
Warm-Up 1) Draw a polygon that is not convex. 2) Find the measure of an exterior angle of a regular decagon. 3) Find the circumference and area of a circle.
Objectives Learn and apply the formula for the surface area of a pyramid. Learn and apply the formula for the surface area of a cone.
What are these shapes? squarecircletrianglerectangle How many sides do each have? How many points do each have?
Holt CA Course Three-Dimensional Figures Warm Up Warm Up Lesson Presentation California Standards Preview.
Vocabulary A polyhedron is a three-dimensional solid with flat surfaces and straight edges. Each polygon is a face of the polyhedron. An edge is a segment.
Warm Up Find the unknown lengths.
Algebra 1 Volume of Solid Figures
Formulas in Three Dimensions
Attributes A quality that is characteristic of someone or something.
Copyright © Ed2Net Learning, Inc.1 Three-Dimensional Figures Grade 5.
Warm Up Classify each polygon. 1. a polygon with three congruent sides 2. a polygon with six congruent sides and six congruent angles 3. a polygon with.
1 CONFIDENTIAL 1 Grade 8 Volume 2. 2 Solid Geometry Solid geometry is concerned with three-dimensional shapes. Some examples of three-dimensional shapes.
LESSON 49 Introduction to Solids. VOCABULARY Solids are three-dimensional figures that have flat and/or curved surfaces Polyhedron is a closed solid formed.
Classifying Solids What is this Solid? Rectangular Prism.
7.1 Three- Dimensional Figures I can classify and draw three-dimensional figures.
Solid Geometry Student Expectations 7 th Grade: 7.3.6C Use properties to classify three- dimensional figures, including pyramids, cones, prisms, and.
Holt McDougal Geometry 10-3 Formulas in Three Dimensions 10-3 Formulas in Three Dimensions Holt Geometry Warm Up Warm Up Lesson Presentation Lesson Presentation.
Learn and apply the formula for the surface area and volume of a pyramid. Learn and apply the formula for the surface area and volume of a cone. Objectives.
9-4 Introduction to Three-Dimensional Figures Warm Up Warm Up Lesson Presentation Lesson Presentation Problem of the Day Problem of the Day Lesson Quizzes.
Holt Geometry 10-5 Surface Area of Pyramids and Cones 10-5 Surface Area of Pyramids and Cones Holt Geometry Warm Up Warm Up Lesson Presentation Lesson.
Holt Geometry 11.4 Surface Area of Pyramids & Cones Learn and apply the formula for the surface area of a pyramid. Learn and apply the formula for the.
Holt McDougal Geometry 10-4 Surface Area of Prisms and Cylinders 10-4 Surface Area of Prisms and Cylinders Holt Geometry Warm Up Warm Up Lesson Presentation.
Warm Up Find the surface area and the volume
Warm Up Find the unknown lengths.
Warm Up Find the perimeter and area of each polygon.
May look at figures in box to give you some ideas. Geometric Solid:
Formulas in Three Dimensions
9-1 Introduction to Three-Dimensional Figures Warm Up
Preview Warm Up California Standards Lesson Presentation.
3-D Shapes Lesson 1Solid Geometry Holt Geometry Texas ©2007
Warm Up Classify each polygon. 1. a polygon with three congruent sides
11.4 Vocabulary Polyhedron Prism, Pyramid, Cylinder, Cone, Sphere
9-1 Introduction to Three-Dimensional Figures Warm Up
Volume of Pyramids and Cones
Solid Geometry.
Objectives Apply Euler’s formula to find the number of vertices, edges, and faces of a polyhedron. Develop and apply the distance and midpoint formulas.
Warm Up Problem of the Day Lesson Presentation Lesson Quizzes.
Formulas in Three Dimensions
Apply the distance and midpoint formula in 3D
Solid Geometry.
14 Chapter Area, Pythagorean Theorem, and Volume
Solid Geometry.
Geometry: Three Dimensional Solids
Presentation transcript:

Geometry Formulas in Three Dimensions CONFIDENTIAL

Use the diagram for Exercises 1-3. Warm Up Use the diagram for Exercises 1-3. C D Classify the figure. 2) Name the edges. 3) Name the base. cylinder 2) no edges 3) O C CONFIDENTIAL

Formulas in Three Dimensions A polyhedron is formed by four or more polygons that intersect only at their edges. Prism and pyramids are polyhedrons, but cylinders and cones are not. polyhedrons Not polyhedron CONFIDENTIAL

A polyhedron is a solid object whose surface is made up of a number of flat faces which themselves are bordered by straight lines. Each face is in fact a polygon, a closed shape in the flat 2-dimensional plane made up of points joined by straight lines. The familiar triangle and square are both polygons, but polygons can also have more irregular shapes like the one shown on the right. A polygon is called regular if all of its sides are the same length, and all the angles between them are the same. CONFIDENTIAL

A polyhedron is what you get when you move one dimension up A polyhedron is what you get when you move one dimension up. It is a closed, solid object whose surface is made up of a number of polygonal faces. We call the sides of these faces edges — two faces meet along each one of these edges. We call the corners of the faces vertices, so that any vertex lies on at least three different faces. To illustrate this, here are two examples of well-known polyhedra. The familiar cube on the left and the icosahedrons on the right. A polyhedron consists of polygonal faces, their sides are known as edges, and the corners as vertices. CONFIDENTIAL

A polyhedron consists of just one piece A polyhedron consists of just one piece. It cannot, for example, be made up of two (or more) basically separate parts joined by only an edge or a vertex. This means that neither of the following objects is a true polyhedron. These objects are not polyhedra because they are made up of two separate parts meeting only in an edge (on the left) or a vertex (on the right). CONFIDENTIAL

In the lab before this lesson, you made a conjecture about the relationship between the vertices, edges, and faces of a polyhedron. One way to state this relationship is given below. CONFIDENTIAL

For any polyhedron with V vertices, E edges, and F faces, Euler’s Formula For any polyhedron with V vertices, E edges, and F faces, V - E + F = 2. CONFIDENTIAL

Using Euler’s Formula Find the number of vertices, edges, and faces of each polyhedron. Use your results to verify Euler’s formula. A B Using Euler’s Formula. Simplify V= 4, E = 6, F = 4 4 - 6 + 4 = 2 2=2 V = 10, E = 15, F =7 10 - 15 + 7 = 2 CONFIDENTIAL

Now you try! 1) Find the number of vertices, edges, and faces of each polyhedron. Use your results to verify Euler’s formula. b) a) a) V= 6, E = 12, F = 8 6 - 12 + 8 = 2 2=2 b) V= 7, E = 12, F = 7 7 - 12 + 7 = 2 2=2 CONFIDENTIAL

A diagonal of a three-dimensional figure connects two vertices of two different faces. Diagonal d of a rectangular prism is shown in the diagram. By the PythagoreanTheoram, l + w = x and x + h = d. Using substitution, l + w + h = d. 2 h d w x l CONFIDENTIAL

Diagonal of a Right Rectangular Prism The length of a diagonal d of a right rectangular prism with length l , width w, and height h is d = 2 l + w + h . CONFIDENTIAL

Using the Pythagorean Theorem in three Dimensions Find the unknown dimension in each figure. The length of the diagonal of a 3 in. by 4 in. by 5 in. rectangular prism 2 d = 3 + 4 + 5 = 9 + 16 + 25 = 50 = 7.1 in. Substitute 3 for l, 4 for w, 5 for h. Simplify. Next page  CONFIDENTIAL

Substitute 18 for d, 8 for l, 12 for w. B) The height of a rectangular prism with an 8 ft by 12 ft base and an 18 ft diagonal = 10.8 ft 18 = 8 + 12 + h 2 18 = ( 8 + 12 + h ) 324 = 64 + 144 + h h = 116 h = 116 Substitute 18 for d, 8 for l, 12 for w. Square both sides of the equation. Simplify. Solve for h. Take the square root of both sides. CONFIDENTIAL

2) Find the length of the diagonal of a cube with edge length 5 cm. Now you try! 2) Find the length of the diagonal of a cube with edge length 5 cm. 2) 8.67 cm CONFIDENTIAL

Space is the set of all points in three dimensions Space is the set of all points in three dimensions. Three coordinates are needed to locate a point in space. A three-dimensional coordinate system has 3 perpendicular axes: the x-axis, the y-axis, and the z-axis. An ordered triple (x , y ,z) is used to located a point. To located the point (3, 2, 4), start at (0, 0, 0). From there move 3 units forward, 2 units right, and then 4 units up x y z CONFIDENTIAL

Graphing Figures in Three Dimensions Graph each figure. A) A cubed with edge length 4 units and one vertex at (0, 0, 0) (0, 0, 0) (0, 0, 4) (4, 0, 4) (4, 0, 0) x z y (4, 4, 4) (0, 4, 4) (0, 4, 0) (4, 4, 0) The cube has 8 vertices: (0, 0, 0), (0, 4, 0), (0, 0, 4), (4, 0, 0) (4, 4, 0), (4, 0, 4), (0, 4, 4),(4, 4, 4) Next page  CONFIDENTIAL

Graph the center of the bottom base at (0, 0, 0). Graph each figure. B) A cylinder with radius 3 units, height 5 units, and one base centered at (0, 0, 0) Graph the center of the bottom base at (0, 0, 0). Since the height is 5, graph the center of the top base at (0, 0, 5) The radius is 3, so the bottom base will cross the x-axis at (3, 0, 0) and the y-axis at (0, 3, 0). Draw the top base parallel to the bottom base and connect the bases. (0, 0, 0) (0, 0, 5) (3, 0, 0) x z y (0, 3, 0) CONFIDENTIAL

Now you try! 3) Graph a cone with radius 5 units, height 7 units, and the base centered at (0, 0, 0) CONFIDENTIAL

You can find the distance between the two points (x1, y1, z1) and (x2, y2, z2) by drawing a rectangular prism with the given points as endpoints of a diagonal. Then use the formula for the length of the diagonal. You can also use a formula related to the Distance formula. (see Lesson 1-6.) The formula for the midpoint between (x1, y1, z1) and (x2, y2, z1) is related to the Midpoint formula. (see Lesson 1-6.) z x y M (x2, y2, z2) (x1, y1, z1) CONFIDENTIAL

Distance and Midpoint Formulas in three Dimensions CONFIDENTIAL

Finding Distances and Midpoints in Three Dimensions Find the distance between the given points. Find the midpoint of the segment with the given endpoints. Round to the nearest tenth, if necessary. A) (0, 0, 0) and (3, 4, 12) Midpoint: Distance: CONFIDENTIAL

Find the distance between the given points Find the distance between the given points. Find the midpoint of the segment with the given endpoints. Round to the nearest tenth, if necessary. B) (3, 8, 10) and (7, 12, 15) Distance: Midpoint: CONFIDENTIAL

Now you try! Find the distance between the given points. Find the midpoint of the segment with the given endpoints. Round to the nearest tenth, if necessary. 4a. (0, 9, 5) and (6, 0, 12) 4b. (5, 8, 16) and (12, 16, 20) 4a) 12.89 units ; M(3, 4.5, 8.5) 4b) 11.36 units ; M(8.5, 12, 13) CONFIDENTIAL

Recreation Application Two divers swam from a boat to the locations shown in the diagram. How far apart are the divers? The location of the boat can be represented by the ordered triple (0, 0, 0), and the location of the divers can be represented by the ordered triples (18, 9, -8) and (-15, -6, -12). 9 ft Depth: 8 ft Depth: 12 ft 18 ft 15 ft 6 ft Use the Distance Formula to find the distance between the divers. CONFIDENTIAL

Now you try! 5) If both divers swam straight up to the surface, how far apart would they be? 9 ft Depth: 8 ft Depth: 12 ft 18 ft 15 ft 6 ft 5) units ;() CONFIDENTIAL

Now some problems for you to practice ! CONFIDENTIAL

1) Explain why a cylinder is not a polyhedron. Assessment 1) Explain why a cylinder is not a polyhedron. 1) A polyhedron is a solid object has vertices, edges and faces which cylinder does not have. CONFIDENTIAL

2) Find the number of vertices, edges, and faces of each polyhedron 2) Find the number of vertices, edges, and faces of each polyhedron. Use your results to verify Euler’s formula. A) B) A) V= 6, E = 10, F = 6 6 - 10 + 6 = 2 2=2 B) V= 6, E = 10, F = 6 6 - 10 + 6 = 2 2=2 CONFIDENTIAL

3) Find the unknown dimension in each figure 3) Find the unknown dimension in each figure. Round to the nearest tenth, if necessary. The length of the diagonal of a 4 ft by 8 ft by 12 ft rectangular prism. The height of rectangular prism with a 6 in. by 10 in. base and 13 in. diagonal 14.97 ft 5.74 in. CONFIDENTIAL

4) Graph each figure. A cone with radius 8 units, height 4 units, and the base centered at (0, 0, 0) A cylinder with radius 3 units, height 4 units, and one base centered at (0, 0, 0) CONFIDENTIAL

5) Find the distance between the given points 5) Find the distance between the given points. Find the midpoint of the segment with the given endpoints. Round to nearest tenth, if necessary. (0, 0, 0) and (5, 9, 10) (0, 3, 8) and (7, 0, 14) CONFIDENTIAL

6) After a day hike, a group of hikers set up a camp 3 km east and 7 km north of the starting point. The elevation of the camp is 0.6 km higher than the starting point. What is the distance from the camp to the starting point? CONFIDENTIAL

Formulas in Three Dimensions Let’s review Formulas in Three Dimensions A polyhedron is formed by four or more polygons that intersect only at their edges. Prism and pyramids are polyhedrons, but cylinders and cones are not. polyhedrons Not polyhedron CONFIDENTIAL

In the lab before this lesson, you made a conjecture about the relationship between the vertices, edges, and faces of a polyhedron. One way to state this relationship is given below. CONFIDENTIAL

For any polyhedron with V vertices, E edges, and F faces, Euler’s Formula For any polyhedron with V vertices, E edges, and F faces, V - E + F = 2. CONFIDENTIAL

Using Euler’s Formula Find the number of vertices, edges, and faces of each polyhedron. Use your results to verify Euler’s formula. A B Using Euler’s Formula. Simplify V= 4, E = 6, F = 4 4 - 6 + 4 = 2 2=2 V = 10, E = 15, F =7 10 - 15 + 7 = 2 CONFIDENTIAL

A diagonal of a three-dimensional figure connects two vertices of two different faces. Diagonal d of a rectangular prism is shown in the diagram. By the PythagoreanTheoram, l + w = x and x + h = d. Using substitution, l + w + h = d. 2 h d w x l CONFIDENTIAL

Diagonal of a Right Rectangular Prism The length of a diagonal d of a right rectangular prism with length l , width w, and height h is d = 2 l + w + h . CONFIDENTIAL

Using the Pythagorean Theorem in three Dimensions Find the unknown dimension in each figure. The length of the diagonal of a 3 in. by 4 in. by 5 in. rectangular prism 2 d = 3 + 4 + 5 = 9 + 16 + 25 = 50 = 7.1 in. Substitute 3 for l, 4 for w, 5 for h. Simplify. Next page  CONFIDENTIAL

Substitute 18 for d, 8 for l, 12 for w. B) The height of a rectangular prism with an 8 ft by 12 ft base and an 18 ft diagonal = 10.8 ft 18 = 8 + 12 + h 2 18 = ( 8 + 12 + h ) 324 = 64 + 144 + h h = 116 h = 116 Substitute 18 for d, 8 for l, 12 for w. Square both sides of the equation. Simplify. Solve for h. Take the square root of both sides. CONFIDENTIAL

Space is the set of all points in three dimensions Space is the set of all points in three dimensions. Three coordinates are needed to locate a point in space. A three-dimensional coordinate system has 3 perpendicular axes: the x-axis, the y-axis, and the z-axis. An ordered triple (x , y ,z) is used to located a point. To located the point (3, 2, 4), start at (0, 0, 0). From there move 3 units forward, 2 units right, and then 4 units up x y z CONFIDENTIAL

Graphing Figures in Three Dimensions Graph each figure. A) A cubed with edge length 4 units and one vertex at (0, 0, 0) (0, 0, 0) (0, 0, 4) (4, 0, 4) (4, 0, 0) x z y (4, 4, 4) (0, 4, 4) (0, 4, 0) (4, 4, 0) The cube has 8 vertices: (0, 0, 0), (0, 4, 0), (0, 0, 4), (4, 0, 0) (4, 4, 0), (4, 0, 4), (0, 4, 4),(4, 4, 4) Next page  CONFIDENTIAL

Graph the center of the bottom base at (0, 0, 0). Graph each figure. B) A cylinder with radius 3 units, height 5 units, and one base centered at (0, 0, 0) Graph the center of the bottom base at (0, 0, 0). Since the height is 5, graph the center of the top base at (0, 0, 5) The radius is 3, so the bottom base will cross the x-axis at (3, 0, 0) and the y-axis at (0, 3, 0). Draw the top base parallel to the bottom base and connect the bases. (0, 0, 0) (0, 0, 5) (3, 0, 0) x z y (0, 3, 0) CONFIDENTIAL

You can find the distance between the two points (x1, y1, z1) and (x2, y2, z2) by drawing a rectangular prism with the given points as endpoints of a diagonal. Then use the formula for the length of the diagonal. You can also use a formula related to the Distance formula. (see Lesson 1-6.) The formula for the midpoint between (x1, y1, z1) and (x2, y2, z1) is related to the Midpoint formula. (see Lesson 1-6.) z x y M (x2, y2, z2) (x1, y1, z1) CONFIDENTIAL

Distance and Midpoint Formulas in three Dimensions CONFIDENTIAL

Finding Distances and Midpoints in Three Dimensions Find the distance between the given points. Find the midpoint of the segment with the given endpoints. Round to the nearest tenth, if necessary. A) (0, 0, 0) and (3, 4, 12) Midpoint: Distance: Next page  CONFIDENTIAL

Find the distance between the given points Find the distance between the given points. Find the midpoint of the segment with the given endpoints. Round to the nearest tenth, if necessary. B) (3, 8, 10) and (7, 12, 15) Distance: Midpoint: CONFIDENTIAL

Recreation Application Two divers swam from a boat to the locations shown in the diagram. How far apart are the divers? 9 ft Depth: 8 ft Depth: 12 ft 18 ft 15 ft 6 ft The location of the boat can be represented by the ordered triple (0, 0, 0), and the location of the divers can be represented by the ordered triples (18, 9, -8) and (-15, -6, -12). Use the Distance Formula to find the distance between the divers. CONFIDENTIAL

You did a great job today! CONFIDENTIAL