NIKON NPL-332 TOTAL STATION CE 201 ENGINEERING SURVEYING

NIKON NPL-332 TOTAL STATION SETUP INSTRUMENT: Turn On Rotate Alidade Tilt Telescope

NIKON NPL-332 MEASUREMENT SETTINGS MSR1 or MSR2 Hold down key for 1 sec Target – N-Prism/Prism Const – 30 mm Mode – Normal/Precise Ave – 0 to 99 - 3 Rec – Confirm/All/ MSR

NIKON NPL 332 INITIAL SETTINGS MENU 3: Settings 1: Angle VA Zero : Vert = 0 ANG Reso: 1”/5”/10” HA: 0 to BS/AZIMUTH 2: Dist Scale: 1.00000 T-P: On Sea Level: On C&R: 0.132 3: Coord. Cord.: NEZ/ENZ Label: XYZ/YXZ/NEZ AZ ZERO: North 4: Power Main: OFF EDM: OFF Sleep: OFF 7: Units Angle: DEG Dist: US-FT Input: decimal-Ft Temp: degF Press: inHg 8:Recording 9: Other Settings XYZ disp 2nd Unit Sig Beep Split St. CD Input Owner Detail

NIKON NPL 332 HOT KEY: 1: HT - Input Height of Target 2: T-P - Input Temperature & Pressure 3: Target = Prism 30 mm - Prism Offset 4: Notes = 50 characters BUBBLE INDICATOR: (0) KEY Graphical Check

NIKON NPL 332 MEASURING DISTANCE Sight Target Press MSR1 or MSR2 if ave. count = 0, cont. measurement if ave. count set to >0 , SDx DISPLAY - DSP Key toggle between displays: 1/4, 2/4, 3/4, 4/4

NIKON NPL 332 HORIZONTAL ANGLE ANGLE KEY 1: 0-Set 2: Input – ddd.mmss 3:Rept – angle repetitions 4:F1/F2 – Face Left/Right 5:Hold – hold horizontal angle

NIKON NPL 332 RDM: Remote Distance Measurement PROGRAMS (4 Key) Indirect Distance Measurement PROGRAMS (4 Key) CONTINUOUS (4)

NIKON NPL 332 Remote Distance Measurement Difference between “3:RDM(Radial)” & “4:RDM (Cont.)”

NIKON NPL 332 DISPLAY Sight 1st Pt Sight 2nd Pt MSR1 or MSR2 MAGNETIC AZIMUTH

NIKON NPL 332 REM: REMOTE ELEVATION MEASUREMENT PROGRAMS (4 Key)

NIKON NPL 332 REM: REMOTE ELEVATION Enter HT – Target Height Sight Target MSR1 Sight Vertical Point Read Vh

NIKON NPL 332 JOB SETUP MENU 1: JOB OPEN EXISTING JOB - enter Or CREATE NEW JOB 8 Characters - GRP # Enter – Create Job Abrt (Soft Key) Sett (Soft Key) OK (Soft Key) * = Current Job

NIKON NPL 332 STATION: STN / 7 KEY STATION 10 1: Known ST: Enter Station Pt -10 INPUT N,E,Z N = 1,000.00 E = 1,000.00 Z = 100.00 HI = ________ CD = _______ ENTRANCE OLIN STATION 10

NIKON NPL 332 STATION BACK SIGHT SIGHT BS & ENT STATION 10 2: ANGLE OLIN STATION BACK SIGHT 2: ANGLE BS PT - No Entry AZ – Mag Azimuth – Flag Pole SIGHT BS & ENT STATION 10 ENTRANCE

POINT GUIDANCE Traverse Points – Single Digit Instrument/Setup Pts – Double Digit Sideshots/BM – Triple Digits HMU #4 STATION 11 FIRE #101 B-BALL #5 MILLER #3 OLIN #2 STATION 10 STATION 12 STATION 13 ENTRANCE #1 ENTRANCE #7 PARKING #6

NIKON NPL 332 Bench Mark Survey STN / 7 KEY 4: RBM STATION 10 OLIN Bench Mark Survey STN / 7 KEY 4: RBM Input BM Point – (Flag Pole) PT= 0 - Enter N = No Entry E = No Entry Z = 561.00 HT= ________ CD = FLAG STATION 10 ENTRANCE Sight Benchmark MSR ENT HI ______

NIKON NPL-332 POINT SURVEY SIGHT POINT MSR1 RECORD PT _____ CD _____ ENT Comments Left Cursor – Delete Entry Right Cursor – Overwrite Mode Auto Point Advance = Next Pt = Pt =1

NIKON NPL 332 New Instrument Station STATION 11 STN / 7 KEY HMU STATION 11 New Instrument Station STN / 7 KEY 2: RESECTION PT: 1ST POINT Input Point # – ENTER HT Sight 1st POINT MSR PT: 2ND POINT Sight 2nd POINT B-BALL MILLER OLIN ENTRANCE PARKING

NIKON NPL 332 New Instrument Station STATION 11 (Continued) HMU STATION 11 New Instrument Station (Continued) N (small number good) E (small number good) Z (small number good) REC ST 11 HI ______ CD STATION 11 BS _____(Default 1st PT) ENT B-BALL MILLER OLIN ENTRANCE PARKING