AMS-02 tracker mechanics status of assembly and integration at UniGe Outer planes: - Tests of evaporator (cooling loop) integration - Tools to develop.

Slides:

Advertisements

Similar presentations

Status of EC-C assembly at Liverpool C Buttar EC PAR, Nikhef Nov 04.

Advertisements

Xenon Detector Status Liquid Xenon Group. 1 Outline Cryostat construction –Honeycomb panel test at Pisa –Assembly –Cryogenic test at SIMIC –Leak test.

Technical Board, 12 July 2005Børge Svane Nielsen, NBI1 Status of the FMD Børge Svane Nielsen Niels Bohr Institute.

ATLAS SCT Endcap Detector Modules Lutz Feld University of Freiburg for the ATLAS SCT Collaboration Vertex m.

16/5/2003SCT PAR, Georg Viehhauser1 Assembly of Modules to Cylinders Georg Viehhauser.

ALICE TPC field cage status Sardinia May 2004 Michael Hoch Cern-TA2.

AMS-02 tracker mechanics status of assembly and integration Inner tracker integration completion: - Assembly and cabling - Temperature and magnetic field.

AMS tracker hardware status (mechanics and cabling) Divic RAPIN, UniGe AMS splinter tracker, Septidi 7 Brumaire 217 (october 28, 2008) off-line operations.

Tagger and Vacuum Chamber Assembly Procedure. Preassembly of second bottom yokes and poleshoes. a) Install special support. b) Place the second bottom.

AMS-02 tracker mechanics status of construction, assembly, integration Production: - Ladder integration - Installation on planes Inner tracker assembly:

The AMS-02 detector is based on a large acceptance (~0.5 m²sr) and high sensitivity spectrometer composed by a super-conducting magnet (0.8 T), cooled.

The LHCb Inner Tracker LHCb: is a single-arm forward spectrometer dedicated to B-physics acceptance: (250)mrad: The Outer Tracker: covers the large.

ILC Main Linac Superconducting Cryogen Free Splittable Quadrupole Progress Report V. Kashikhin for Superconducting Magnet Team.

IBL Mock Up IBL Mock Up MANUFACTURING 2011/04/29 François-Xavier NUIRY Maxence CURDY Andrea CATINACCIO CERN PH/DT/PO 1.

1 Cryostat assembly, integration and commissioning procedures M.Olcese Version: 07 May 2008.

Tooling and assembly of US stavelet at Berkeley S. Díez Cornell, C. H. Haber, M. Defferrard, R. Witharm Sept 6th, 2012 Berkeley mechanical meeting, 5th-7th.

GERDA collaborationmeeting, Ringberg castle Béla MajorovitsTG5 Review: Infrastructure on top of the tank1.

Update on alignment kit and stave 250 frame M.Gibson (RAL) 1.

26 April 2013 Immanuel Gfall (HEPHY Vienna) Belle II SVD Overview.

1 5 December 2012 Laurent Roy Infrastructure / Electronics Upgrade -Cabling (long distance) -Rack and Crate (space, electrical distribution, cooling) -Detector.

L. Greiner 1IPHC meeting – May 7, 2012 STAR HFT Plans for the next year A short report on HFT/PXL plans for post May 2012 TPC – Time Projection Chamber.

Installation and Commissioning Planning Leslie Camilleri Calorimeter Commissioning Meeting 5 th September 2006.

Construction and Installation Readiness of TOTEM Roman Pots Detectors Federico Ravotti (PH/TOT) Gennaro Ruggiero (PH/TOT) LHCC minireview – 06 May 2009.

G.Barber KEK Test Beam Update, Berkeley 9 Feb KEK Test Beam – Tracker Progress Contents:- Station Space Frame Light Guide Map Station Connectors.

Ronald Lipton PMG June Layer 0 Status 48 modules, 96 SVX4 readout chips 6-fold symmetry 8 module types different in sensor and analog cable length.

ATLAS SCT End-Cap C Integration 1.Introduction: to the SCT within ATLAS 2.End-Cap C Reception at CERN 3.Final Assembly 4.Integration with the TRT 5.Combined.

PRY Base - Contents l PRY Support/Base/Platform in the MICE Hall l History l Requirements l Environment l Design l Structural Integrity l Preparation l.

16/04/20031PNPI / LHCb Muon EDR Wire Pad Chambers PNPI design for regions R4 in Stations M2,M3,M4  4 gas gaps of 5mm±70µm;  Active area: 1224x252.8 mm².

1 1. EMR production status 2. EMR simulations (FEA studies) 3. RAL 1. EMR production status 2. EMR simulations (FEA studies) 3. RAL Teleconf.

L. Greiner 1IPHC meeting – May 7, 2012 STAR HFT Plans for the next year A short report on HFT/PXL plans for post May 2012 TPC – Time Projection Chamber.

AMS-02 tracker mechanics status of construction, assembly, integration Ladder assembly Ladder installation on planes Integration details, cooling loop,

SPD cabling issues I.Cable status II.Cabling inside VFE box III.Cable through chains (Gael) IV.Data spare cables V.Control bundles VI.Information for cabling.

Neil Jackson University of Liverpool Hiroshima Symposium June THE ATLAS SEMICONDUCTOR TRACKER (SCT) A PRESENTATION ON BEHALF OF THE ATLAS.

ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL.

E.Guschin (INR) 21 November 2003Integration EDR PRS/SPD static envelop, assembly and installation Detector layout Static envelop along the beam Detector.

LAV construction: Status and overview Matthew Moulson (Frascati) for the LAV Working Group NA62 Photon-Veto Working Group Meeting Brussels, 8 September.

G.Barber: Sci-Fi Mechanical Design - Tracker Meeting Cern 29 March Latest thoughts on Mechanical Design Contents:- Revised Fibre Pitch Fibre Optic.

Vrije Universiteit amsterdam Milan, September 25, 2000 VELO System J.F.J. van den Brand LHCb Vertex Detector System: Status Report J.F.J. van den Brand.

PHIN Fabrication of a photo-injector for the CTF3 accelerator and for the NEPAL test stand WP 4 of the JRA2 PHIN 1.Status of the construction of RF guns.

Lavs Issues Lav 12. Tube Planning future activities. Conclusions.

A.Cheremukhin (JINR, Dubna) CMS Preshower PRR, July 5-6, 2001, CERN1 Micro-module assembly -  -module elements - alignment of the silicon sensors to the.

PHASE II FLIGHT-SAFETY REVIEW AMS-02 EXPERIMENT sub-detector SILICON TRACKER Roberto Battiston - AMS-02 Phase II Safety Review - Houston JSC May 21-25,

IBL – UniGe involvements UniGe Team : G. Barbier, F. Cadoux, A. Clark, S. Débieux, D. Ferrère, C. Husi, G. Iacobucci, M. Weber Other member (KEK): Y. Takubo.

6 September 2007VELOEddy Jans 0 VELO-installation++ activities September 6, 2007 General items Detector installation plans.

Vessel dimensions GTK assembly carrier Electrical connections Cooling pipes integration Vessel alignment with the beam Next steps Conclusion 3/23/20102electro-mechanical.

July 20, 2007Anita Topkar, BARC PSD Production: Present Status Dr Anita Topkar BARC.

AMS Tracker Meeting17/10/05 Eric Perrin (GE) Tracker mechanics at Uni -Ge Safety issues Assembly Still to be made.

MICE Coupling Coil Update Allan DeMello Lawrence Berkeley National Laboratory Illinois Institute of Technology June 17, 2013 June 17, 2013.

Technical Design for the Mu3e Detector Dirk Wiedner on behalf of Mu3e February Dirk Wiedner PSI 2/15.

Plans for the UT Installation LHCb infrastructure workshop February Burkhard Schmidt for the UT group.

Cryomodule Interconnect Installation Issues A Comparison of XFEL to LCLSII Karen Fant 7/29/2015.

The HiLumi LHC Design Study is included in the High Luminosity LHC project and is partly funded by the European Commission within the Framework Programme.

B2GM, Nov 2014 Laci Andricek, MPG Halbleiterlabor 1 PXD Ladder Assembly - Conceptual design of jigs -

BM&N STS ladders assembly in VLHEP

Progress with System Integration of the CBM Silicon Tracking Detector

Baby-MIND Modules & Services

Update on PANDA solenoid design

MQXC Nb-Ti 120mm 120T/m 2m models

T. Bowcock University of Liverpool

Service channels between Tracker and PP1

Service channels between Tracker and PP1

Update on the SVD construction

- STT LAYOUT - SECTOR F SECTOR A SECTOR B SECTOR E SECTOR D SECTOR C

Micro Vertex Detector of PANDA Strip Detector

Integration issues at IHEP

Module/Ladder Assembly

Cryomodule Assembly Plan

Presentation transcript:

AMS-02 tracker mechanics status of assembly and integration at UniGe Outer planes: - Tests of evaporator (cooling loop) integration - Tools to develop Inner tracker integration: - Assembly and cabling - Temperature and magnetic field sensors - Shells closing and flanges mounting - Tests of evaporator integration (pre-assembly) Preparations: - Pre-assembly of outer planes + inner tracker - TAS tests - Transport and storage at CERN Divic RAPIN, UniGe

General view of Silicon tracker 5 planes, 8 layers Plane 1, layer 1 Plane 2, layers 2&3 Plane 3, layers 4&5 Plane 4, layers 6&7 Plane 5, layer ladder modules

Ladder Assembly (Perugia-Geneva) ASSEMBLY ~ 210 ladders build PHASE 2 hybrid box & legs gluing ~ completed EMI SHIELDING ( kapton foil wrapping) ~ 31 ready for process Full test at each step with RA source and noise control

Installation of ladders on support planes (UniGe clean room) Plane 3 being stored (under Nitrogen) Details of fixation on both sides FINISHED

Complete installation and assembly jig Outer ring assembly and installation jig Inner ring assembly and installation jig Cooling loops are fragile and not self supporting. They need to be kept in jigs for fabrication, storage, transport and assembly Upper cooling loops (build at NIKHEF) were delivered for pre-assembly tests at UniGe

Test of outer cooling loop integration on plane 1

The outer loop can be mounted -The fabrication jig is not well suited for installation - - Need to develop an new tool for installation of outer planes to tracker and vacuum case (compatible with cables and TAS). - Need information from TAS about patch panel dimensions

Assembly of the inner tracker Set-up for storage & insertion into the magnet. Cables must be installed before the supporting shells and extra length must be attached to temporary supports. Further integration works delayed by cosmic and TAS tests UniGe manpower resources are decreasing

Tracker without closing and supporting shells

Inner cabling is finalized Clamps to fix the cables on the back of the hybrids Extra length of cables is stored on top and bottom temporary supports

Temperature sensors for inner tracker Four double Dallas sensors will measure temperature at the center of inner tracker. (not foreseen from beginning of project) Integration constraints lead us to join inner measurement chain with upper loops measurement chain.

Difficult locations (2 mm clearance from the edges of the bars to the shell) Difficult locations ~Free apertures Shown previously

T-measurement chain installation Pieces were developed and built to support and guide the wires of the Dallas sensors chains through difficult locations.

T-measurement chain installation T-sensors Magnetic field sensors ( ETHZ )

Installation of supporting shells is starting Checking mechanical interferences and mountability

Near future integration operations at UniGe Design of storage and transport jigs for inner tracker and outer planes (re-use of Alu frame used for AMS01 beam test) (in progress) Design and construction of outer plane installation jig (info from TAS needed). Supporting shells installation and remove inner tracker from Durga. Pre-assembly of inner evaporator on inner tracker (check mountability). Pre-assembly of outer planes (check mountability) on inner tracker. Time requested by TAS for laser beam alignment/installation. Orbital welding of new connectors is needed for upper/lower inner/outer evaporators (on critical path)