Introducing Belliss USA Inc. A SUBSIDIARY OF A LEADING INTERNATIONAL STEAM TURBINE MANUFACTURER BELLISS INDIA LIMITED

Belliss USA Inc. Steam Turbines International Sourcing Component Manufacturing Eng/Dftg Services Installation Field Services Project Management

Belliss India Limited Incorporated in 1960 - OVER 48 YEARS Originally turbines built under license from W.H. ALLEN (UK) Previously a division of Rolls Royce Product range -100KW TO 20,000KW 0ver 2,500 turbines shipped to date 55,000 square feet of manufacturing and test space Turbines consistent with API/ISO standards Units installed in 11 different industries Units operating in 15 different countries

Bhadreshar Works

Worldwide Installations We have not only made our mark in India but in other countries such as… AUSTRALIA BANGLADESH FIJI ISLAND NEPAL NEW ZEALAND NIGERIA SINGAPORE SPAIN SOUTH AFRICA TANZANIA UGANDA VIETNAM PHILIPINES The first Indian company to export to South Africa and Australia

Technical Strength Technology company with 250 engineers designing, manufacturing and servicing steam turbines Partnering with USA design engineering company with extensive steam turbine design and packaging experience   Products consistent with international standards including, NEMA, ISO and API Design and performance tools used for the design of thousands of turbines by Belliss and W.H. Allen Development tools including 3-D design and modeling software

Infrastructure Three (3) Manufacturing, assembly and test facilities Bucket and rotor shop with multi-axis NC machining In house fabrication and machining of diaphragms Fully computerized engineering and design facility Proven analysis software and design tools Project execution team Over 50 Field service engineers on staff Steam testing facility In house parts warehouse Complete lubrication system design and testing Digital and mechanical controls expertise including system integration and testing

Bio Mass – Turbine Generator Sets for Uruguay Two fundamental choices for steam turbine exhaust: Non Condensing-Exhaust above atmospheric pressure Pros: Steam at lower pressures can be used in food processing, heating, air conditioning, process or for other small turbine drivers. Cons: Since exhaust pressure is high, depending on the pressure level, it will require 2 to 3 times as much steam to make the same output. Potentially 100% Make up water will have to be treated. Condensing Turbine –Vacuum or sub-atmospheric Pros: Due to the higher available energy, more power will be generated for the available steam. Cons: Requires a condenser, cooling towers and a larger turbine Only choice if no steam host available

Bio Mass – Turbine Generator Sets for Uruguay NON CONDENSING (SNC) STRAIGHT CONDENSING (SC) 45 Kg/cm²g/@450 ºC Condenser Generator Gear Turbine 1.5-5 Kg/cm²g

Bio Mass – Turbine Generator Sets for Uruguay Belliss India Limited has experience in both Condensing and Non Condensing turbines in this size range. Geared turbine generator sets are the norm for this size range to take advantage of higher speed turbine designs If High power sales is key, a condensing turbine is best If Process steam is more valuable, a non condensing turbine may be best

Bio Mass – Turbine Generator Sets for Uruguay Required steam data: (If steam flow is known, output will be calculated) Note: Every turbine/generator set is custom designed   Turbine Generator Inlet Steam Inlet Flow Exhaust Speed Kwe Conditions kg/hr Normal 450 ___ Kg/cm² g/ ____°C ___Kg/cm² ABS Rated 495 Inlet steam conditions: (The higher pressure & temperature, the greater the available energy will be but, the cost of hardware will likely increase as will the plant piping)

Single Stage Turbine MODEL SS4A Max Output • 700 HP Rated Speed • 7,000 RPM Max Inlet Pressure • 640 Psig Max Inlet Temp • 842 °Ftt Max Exhaust • 80 Psig Number of Hand Valves: 2 Standards Followed BS/NEMA/API Application: Mechanical Drives & Power Gen

Single Stage Turbine MODEL SS6A Typical Scope Max Output • 1,200 HP Rated Speed • 6,000 RPM Max Inlet Pressure • 640 Psig Max Inlet Temp • 842 °Ftt Max Exhaust Pressure • 80 Psig S6H : 1,200 HP @ 256 Psig Exhaust Number of Hand Valves: 2 Standards Followed: BS/NEMA/API Application: Mech. Drives & Power Gen Typical Scope Turbine Gear Generator Oil System Turbine Controls Generator Excitation and Protection Base mounted turbine, gear and generator Steam testing Condenser when required

After Market Support Large spare parts inventory at Kolkata factory   Fifty (50) Experienced service engineers trained and ready for deployment world wide Association with USA Engineering and service companies

Summary Belliss Turbines Incorporated in 1960 Heritage from W. H ALLEN/ ROLLS ROYCE Over 1200 single stage turbines in service Over 1300 multi stage turbines in service Highly standardized frame sizing designs Complete packaging including controls and oil system Detail design and analysis on every unit ISO 9001:2000 Certified Material certification and inspection by LLOYDS