GST FIRE ALARM SYSTEM INTERNATIONAL BUSINESS DEPARTMENT , GST BEIJING 2.25.2007

Fire Detection Presentation Control Panels Intelligent Fire Alarm Control Panel

Intelligent Fire Alarm Control Panel GST200 At most 30 zones. Each zone has its own alarm and fault/disable LEDs and a label. Loop capacity of 235 intelligent devices Fire and fault relay output Built-in gas extinguishing control Optional fireman’s control panel Advanced user friendly programming software including “fuzzy logic” LPCB Certification

Intelligent Fire Alarm Control Panel GST500 Large Graphical LCD display Fire and fault relay output 60 zone indication and manual intervention panel Built-in gas extinguishing control Optional fireman’s control panel Advanced user friendly programming software including “fuzzy logic” GST500/2 two loops panel can connect up to 480 devices GST500/4 four loops panel can connect up to 750 devices

Intelligent Fire Alarm Control Panel GST5000 Large Graphical LCD Display Connecting up to 4840 addressable devices Zone indication and manual intervention control expandable to 254 zones and plant overrides Built-in gas extinguishing control Optional fireman’s control panel Advanced user friendly programming software including “fuzzy logic”

Intelligent Combination Heat/Photoelectric Smoke Detector Electrically addressable Integration of photoelectric detection and fixed temperature and rate of rise detection by combining smoke sensor and heat sensor Built-in microprocessor stores 14 history data Removable innovative sensing chamber, easy maintenance; Fault self-diagnosis CE Certification

Intelligent Photoelectric Smoke Detector Aesthetically pleasing low profile design 8 bit intelligent processor with A/D converter Fire algorithms analysis to minimize false alarm High reliability, stability and coherence of the sensor Removable optical chamber for easy cleaning Maintenance LPCB , UL and CE Certification

Intelligent Digital Optical Smoke Detector NEW Advanced digital communication Electrically addressable LED’s for 360°degree vision Sensor fault self diagnosis Drift compensation Incorporated with the latest fire identification technology Self diagnosis and history log EN54 compliance

Intelligent Rate of Rise and Fixed Temperature Heat Detector Fixed temperature response is adjustable via hand held programmer between 54℃ and 80℃ 8 bit intelligent processor with A/D converter Stable and reliable performance Monitoring area: 30m2 for space height not higher than 8m LPCB and CE Certification

Intelligent Digital Heat Detector NEW Built in 8 bit microprocessor Electrically addressable LED’s for 360°degree vision Sensor fault self diagnosis Fixed temperature and rate of rise selectable EN54 compliance

Intelligent Ultraviolet Flame Detector Sensitive Ultraviolet sensor that detects the UV rays produced by a flame Not effected by sunlight Dust/corrosion/humidity resistant Standard calibration set to detect a 3cm flame at 6m Effective range 12m Stable and reliable performance

Intelligent Reflective Beam Detector I-9105R Range 8-100m, 3 selectable levels of sensitivity adjustable Combination of the emitting and receiving part makes mounting easy and optical pathway accurate Built-in microprocessor enables intelligent judgment of fire alarm and fault Self-diagnosis and automatic compensation Simple to control and operate by integrating LON works protocol SMT processing technology CE Certification

Intelligent Manual Call Point Electronically addressed Alarming by pressing, reset by a special key Non-breaking re-settable glass Providing independent normally open output contact Plug-in structure In compliance with latest EN standards

Addressable Input Module Working mode can be set to normally open, normally closed Electronically addressed The built-in microprocessor processes messages intelligently. Insulation technology for input signal, good anti-interference ability. Plug-in structure LPCB Certification

Addressable Single I/O Module Electronically addressed Insulation technology for input signal, good anti-interference ability The built-in microprocessor processes messages intelligently. Cable checking . LPCB Certification

Addressable Double I/O Module Providing two pairs of input and output contact signals. Occupying two consecutive Cable checking . Plug-in structure

Addressable Single I/O Module C-9503 C-9503 can isolate the shorted circuit from the whole system to ensure normal operation of other parts and locate the isolated part. The isolator is applicable to all kinds of loop fire alarm systems.

GST852RP LCD Repeater Panel Back lit LCD display all fire information Local sounder mute and scroll alarms buttons Two part plug-in construction with base mounted termination allows easy installation and connection Repeater can be plugged in to base at time of commissioning

Conventional Fire Alarm Control Panel GST101/102/104/108/116 1/2/4/8/16 zone conventional multi-wire fire alarm control panel Day/Night mode selectable Output delay Active connects up to 15 fire detectors Repeater is available for GST108 Resistor EOL enables multiple alarm reporting from the same zone Standby battery available CE Certification

CONVENTIONAL FIRE ALARM SYSTEM GST108 P-9907 TERMINAL RESISTOR TERMINAL RESISTOR

Conventional Fire detection wiring Resistance End of Line Note call points must be wired before detectors Active end of Line with Diode Base NOTE Call Points can be wired anywhere on circuit.

INTELLIGENT FIRE ALARM SYSTEM GST200

Fire Detection Presentation Thanks for listening