Impression procedure

Product portfolio for bone level implant impression procedures RC NC Ø 3.3 mm Ø 4.1mm Ø 4.8 mm Impression Post (open tray) Impression Post (closed tray) Snap-on cap Analog Impression Post (open tray) Impression Post (closed tray) Snap-on cap Analog Color coding per implant connection Education

Bone Level implant impression concept 2 impression techniques Open tray impression Closed tray impression The choice depends on user preference and the clinical situation Education

Open tray impression Concept Implant & impression post Intraoral situation Analog & impression post Education

Open tray impression Concept Components Impression post (TAN)*, guide screw (TAN) Benefits Color-coded components correspond to prosthetic connection High precision impression Clear-cut tactile response for accurate positioning Guide screw can be tightened by hand or with the SCS screwdriver Adaptable in height (1 retention ring) Length = synOcta® post + 2.8 mm *TAN is one type of titanium alloy material Impression components are intended for single use only Education

Step by step procedure Open tray impression

Impression procedure Remove closure screw or healing abutment Insert impression post and hand tighten screw with the SCS screwdriver Education

Impression procedure Take impression with an open tray Use an elastomeric impression material Education

Impression procedure When impression material is set, unscrew and remove the impression Education

Impression procedure Screw the implant analog onto the impression post and cast master model Education

It’s recommended to articulate the master model before making the restoration Education

Closed tray impression Concept of snap-on impression cap Components: Cap (Polymer), Post (TAN), Screw (TAN) Benefits Color-coded components correspond to prosthetic connection No additional preparation of tray High precision impression Clear-cut tactile response for accurate positioning Impression components are intended for single use only Education

Closed tray impression Concept of snap-on impression cap RC Screw retained impression post Color coded snap-on cap & guide screw Implant level impression Education

Step by step procedure Closed tray impression

Impression procedure Remove closure screw or healing abutment Insert impression post and hand tighten screw with the SCS screwdriver Education

Impression procedure Ensure that the colors match (cap and screw) and the arrows are positioned in a buccal-lingual direction Snap impression cap onto the impression post Education

Impression procedure Take impression with a closed tray Use an elastomeric impression material Education

Impression procedure Remove the impression Remove the impression post from implant Mount impression post onto the analog (same color) Reposition and snap back into the impression Education

Impression procedure Cast master model Articulate the master model before making the restoration Education