X-dek Instructions for mounting, panel – use and accessories
Number 1 and 2 are important and tot be fitted in this order. After the first 3 positions the others can be fitted in any order. When neccesary the tool can be used to mount the panels together. 1st stitch 2nd stitch 3rd stitch
Mounting help tool
Air-tight fillers
Air and condens tight filler
X-dek with wall, fire resistant solution
Single Skin for the overlap
Extreme fitting
PVC as top layer
EPDM as top layer
X-dek with bitume top layer
X-dek as an envirodek
X-dek under a sloop
X-dek as a renovation solution
Via-Vac for lifting X-dek
Safety on X-dek Longspan
Result safety post
Pluvia system in X-dek
Stitchers and accessoires
Kingspan Holland Different type off X-dek panels may need different kind of stitchers Different underconstructions can also influence the kind of stichers needed Different type of X-dek gives a span up tot 7.90 m. Always contact the Technical Department for details for mounting.
Types There are four types of X-dek Kingspan X-dek Multispan Basic (with a ‘paper’ scrim as outer skin) Kingspan X-dek Multispan Bitumen (with a bitumen as outer skin) Kingspan X-dek Longspan (with a steel weather sheet outer skin) Kingspan Envirodek (same product as X-dek Longspan) *(as well in the UK there is Wards Topspan which is the same as X-dek Longspan)
0800-PANELEN