Presentation is loading. Please wait.

Presentation is loading. Please wait.

Frame Overview A36 Steel square tubing and plate Frame will rest on four wheels or two air skids 90” Long, 30” wide- outside CG envelope Two carts for.

Published byMorris Conley Modified over 8 years ago

Similar presentations

Presentation on theme: "Frame Overview A36 Steel square tubing and plate Frame will rest on four wheels or two air skids 90” Long, 30” wide- outside CG envelope Two carts for."— Presentation transcript:

1 Frame Overview A36 Steel square tubing and plate Frame will rest on four wheels or two air skids 90” Long, 30” wide- outside CG envelope Two carts for 2 and 4 throw, three carts for 6-throw

2 Strength of Frame Singularity functions used to analyze beam Started with max deflection of L/240, or 0.36” Beam 6H x 2L x 3/16 selected, max bending stress too high Design stress limited, factor of safety 2.5 selected for bending Beam 6H x 6L x 3/8 selected Max deflection 0.08 inches due to bending, factor of safety 2.47 Frame weight 553 lb for frame

3 Frame Design

4 Frame Accessories Feet- can be welded or bolted to go between wheels or air skid and frame to raise height Plate- ½” A36 plate welded on top of frame to hold bolt holes

5 Materials Needed 20 feet 6x6x3/8 steel - $571 4x8x1/2 A36 sheet - $499 Source: metalsdepot.com

Download ppt "Frame Overview A36 Steel square tubing and plate Frame will rest on four wheels or two air skids 90” Long, 30” wide- outside CG envelope Two carts for."

Similar presentations

Grimsby Secondary School

Grimsby Secondary School
Team Members: Jon DixonMatt SacksDarrin BeamNathan Murray 2009-2010 2009-2010.

Team Members: Jon DixonMatt SacksDarrin BeamNathan Murray
Mast Storage Rack NNSY Sean Ellis, Philip Crist, Max Carpenter, Gershom Obeng.

Mast Storage Rack NNSY Sean Ellis, Philip Crist, Max Carpenter, Gershom Obeng.
Acculab „Exceleron“ Acculab “Exceleron “ Series Multi-functional Industrial Scale Line Multi-function Industrial Scale.

Acculab „Exceleron“ Acculab “Exceleron “ Series Multi-functional Industrial Scale Line Multi-function Industrial Scale.
Civil Engineering Science Concepts. Forces Static forces act on objects at rest. Compression forces shorten objects. These forces push structures. Tension.

Civil Engineering Science Concepts. Forces Static forces act on objects at rest. Compression forces shorten objects. These forces push structures. Tension.
FEA of Wind Turbine Tower Martin Knecht. The Problem FEA modeling of a wind turbine tower. Analysis: –Stress –Deflection Want to prevent –Yielding –Excessive.

FEA of Wind Turbine Tower Martin Knecht. The Problem FEA modeling of a wind turbine tower. Analysis: –Stress –Deflection Want to prevent –Yielding –Excessive.
Design of Tension Members

Design of Tension Members
Team Flying Sheep Engineering Analysis Mark Berkobin John Nevin John Nott Christian Yaeger Michelle Rivero.

Team Flying Sheep Engineering Analysis Mark Berkobin John Nevin John Nott Christian Yaeger Michelle Rivero.
Key To Successful Tower Installations:

Key To Successful Tower Installations:
MICE Collaboration Meeting at Frascati, Jun 26~29, 2005 Iron Shield Mounting Design Stephanie Yang.

MICE Collaboration Meeting at Frascati, Jun 26~29, 2005 Iron Shield Mounting Design Stephanie Yang.
Bridge Design Project Using SolidWorks and SolidWorks Simulation to design, test and build structures.

Bridge Design Project Using SolidWorks and SolidWorks Simulation to design, test and build structures.
Feasibility MSA P11213. Base Plate Feasibility 3 plastics were looked at for MSA mounting board material: ABS, Acrylic, and polypropylene. Due to cost.

Feasibility MSA P Base Plate Feasibility 3 plastics were looked at for MSA mounting board material: ABS, Acrylic, and polypropylene. Due to cost.
By: Joseph Martinez University of Michigan Supervisor: Dave Pushka, NuMI Project 3Q120-M Quadrupole Magnet Transport.

By: Joseph Martinez University of Michigan Supervisor: Dave Pushka, NuMI Project 3Q120-M Quadrupole Magnet Transport.
ME 501 Corey Roberts Leo Montgomery Motor Plate Analysis.

ME 501 Corey Roberts Leo Montgomery Motor Plate Analysis.
CON 4003, CVE 4073, CVE 5073 Construction Estimating Prof R. V. Locurcio, PE.

CON 4003, CVE 4073, CVE 5073 Construction Estimating Prof R. V. Locurcio, PE.
Mounting arrangement for the Solid Absorber. This contains mounting arrangement for:- 1. Handling and lifting from manufacturer’s place to RAL; 2. For.

Mounting arrangement for the Solid Absorber. This contains mounting arrangement for:- 1. Handling and lifting from manufacturer’s place to RAL; 2. For.
Mechanical Engineering Analysis. Material Selection Process WoodStainless Steel HDPEAluminumPTFE Cost0- - --- - Machinability0- --- Strength0+++-+- Durability0+++0++0.

Mechanical Engineering Analysis. Material Selection Process WoodStainless Steel HDPEAluminumPTFE Cost Machinability Strength Durability
Bedplate The bedplate is foundation on which the crosshead diesel engine is built. It must be rigid enough to support the weight of the rest of the engine.

Bedplate The bedplate is foundation on which the crosshead diesel engine is built. It must be rigid enough to support the weight of the rest of the engine.
VC Training Table Setup and Floating 9-17-2004. Agenda General –Air Supply Requirements Assembly –Assembling the System –Leveling the Table –Isolating.

VC Training Table Setup and Floating Agenda General –Air Supply Requirements Assembly –Assembling the System –Leveling the Table –Isolating.
Materials Lists Preparing to Build. Materials List  Complete list of all supplies needed to complete the project  Must be detailed  Dimensions of materials.

Materials Lists Preparing to Build. Materials List  Complete list of all supplies needed to complete the project  Must be detailed  Dimensions of materials.

Similar presentations

Ads by Google