ZEEMS II Modular Fuel Systems.

Slides:



Advertisements
Similar presentations
FUEL SYSTEM DIAGNOSIS.
Advertisements

FUEL INJECTION SYSTEMS
ZENIT PRO DIRECT AND DIRECT INJECTION TECHNOLOGY
Bridgwater College Electronic Ignition - Programme Ignition.
ELECTRONIC FUEL INJECTION. Introduction Strict emission standards require precise fuel delivery Computers used to calculate fuel needs EFI very precise,
Analysis of Spark Ignition Engine Management System
Induction Mr. Lombardi. Induction The term “induction” applies to the pathway for fuel and air to enter the combustion chamber. Including: – Carburetion.
Bi Fuel Automotive Technologies Who we Are Fyda Energy Solutions is in a partnership with Prins and American Alternative Fuel bringing practical Alternative.
Ignition System Provides a method of turning a spark ignition engine on & off. Operates on various supply voltages (Battery & Alternator) Produces high.
Engine Systems and Components
Engine Electronic Controlled. Ignition systems THE CONSTANT ENERGY IGNITION SYSTEM DIGITAL (PROGRAMMED) IGNITION SYSTEM DISTRIBUTORLESS IGNITION SYSTEM.
Automotive Engines Part 5 (Induction). Induction The term “induction” applies to the pathway for fuel and air to enter the combustion chamber. Including:
PEUGEOT 206 INSTALLATION 99’— 05’ TU5JP4
Team Engine Control Jon Stoker Brian Patterson Avishesh Dhakal 1.
Fuel Evaporation in Ports of SI Engines P M V Subbarao Professor Mechanical Engineering Department Measure of Useful Fuel …..
Sensors used in EFI (Electronic Fuel Injection)
Fuel Injection System.
ELECTRONIC FUEL INJECTION COMPONENTS
SEMINAR ON “GASOLINE DIRECT INJECTION”
FUEL INJECTION SYSTEM OPERATION
Modern Automotive Technology PowerPoint for by Russell Krick
Modern Automotive Technology PowerPoint for by Russell Krick
Electronic Fuel Injection Vocabulary 1.Injector (solenoid ) 9.)emission standards 2.Stoichiometric14.7 to 1 3.Throttle body of injection 4.Port injection10.)Types.
Why………….? coz Speed thrills but Kills! Why Should Speed Governor / Limiter be Installed.
Electronic Fuel Injection
9 Electronic Transmission Controls.
® AutoTune ™. ® Always optimal engine setting Higher productivity – Optimal engine performance at all times – No time spent on carburettor adjustments.
ADVANCE IN AUTOMOBILES HYDROGEN FUELLED ENGINES BY C.SUBRAMANIAN, 10MECH50, III-MECH, VCET,MADURAI.
Diagnosis and Troubleshooting of Automotive Electrical, Electronic, and Computer Systems, Fifth Edition By James D. Halderman © 2010 Pearson Higher Education,
PHSAUTOMOTIVESALSPHSAUTOMOTIVESALS Tune-up Procedure.
1 Conversion of Diesel/S.I. Engines to Operate on Biogas and Producer Gas Dr. Ram Chandra DBT’s Energy Bioscience Overseas Fellow Centre for Rural Development.
Pressure Governor System Electronics. 2 Sentry Pressure Governor System Description The Sentry Pressure Governor System (SPGS) is a J1939 CAN based pressure.
Diesel Engine Management Systems
Diesel Engine Management Systems
The General Electric T-700
Basic construction and operation is same as 3UR-FE on 2007 TUNDRA
Flow Characteristics of Port Fuel Injection System P M V Subbarao Professor Mechanical Engineering Department Matching of Injector with Engine Requirements.
1 CNG System Components Presentation IKCO Samand.
Instructors Click a Section Tab
Alphard - Engine Contents Click a Section Tab.
Engine Overall 2UZ-FE Engine
Types of Sensors Used in Multi-Point Fuel Injection System
Diesel Engine Management Systems Steve Baker. Diesel Engine Management Systems Steve Baker.
5/8A-FE Engine Engine Overall Valve Mechanism Cooling System
MULTI POINT FUEL INJECTION
Introduction to Electronic Fuel Systems
Fuel-Injection Systems
Electronic Fuel Injection
Design of Port Fuel Injection System
SNS COLLEGE OF ENGINEERING Coimbatore-107 Subject: Thermal Engineering
Transducers Topics covered in this presentation:
Actuators Topics covered in this presentation:
Electronic Fuel Injection
THERMAL ENGINEERING BY PRABHAKARAN.T.
The V6 3.2l Engine.
Figure 35.1 Typical port fuel-injection system, indicating the location of various components. Notice that the fuel-pressure regulator is located on.
Gasoline electronic Fuel Injection Systems
Subsystems of EFI Chapter 22 Lesson 2.
Welcome to Malaga WeBex سیستم سوخت رسانی ریل مشترک کاتر پیلار
Figure 18.1 Typical port fuel-injection system, indicating the location of various components. Notice that the fuel pressure regulator is located on.
ELECTRONIC FUEL INJECTION
Two Common Types of EFI Chapter 22 Lesson 3.
Sensors Chapter 17 Lesson 3.
Computers Chapter 17 Lesson 4.
Introduction to Fuel Injection
Door Heat Exchanger: Specification
Fuel-Injection Systems
Body ElectricalModel OutlineChassisBodyfor TechnicianEngine 1 Contents Click a Section Tab.
Presentation transcript:

ZEEMS II Modular Fuel Systems

Gasoline Electronic Fuel Injection System With Drive By Wire Tuned Flow Air Inlet Integral Fuel Pressure Regulator ECU Mounting Bracket (Optional) Electronic Control Unit (ECU) Fuel Return Aluminum ECU Enclosure EFI Module with Fuel Injector Sealed Connector MAP Sensor Electronic Governor Fuel Inlet Manifold Adaptor (Optional) Injector Connector Note: Water & Air Sensors Not Shown 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

General Specifications Electronic Fuel Injection With Drive By Wire Gasoline Applications: Fixed RPM 1.0L-5.8L @ 1800 RPM* Mobile 1.0L-5.8L @ 3200 RPM* Generator Sets 5 kilowatt- 100 kilowatt Throttle Bores: 1.023” / 1.181” / 1.297”/ 1.417”/ 1.535” 1.653”/ 1.771”/ 1.889”/ 1.968” / 2.165” Flow Capability: 225 CFM @ 2.0” Hg Power: 5 HP- 160 HP Air Intake Size: 2.0” Outside Diameter, 90 Degree 2.0” Outside Diameter, Straight Fuel Types: Gasoline, Gasohol Fuel Injector Sizes: 33, 42, 50, 69 lb./hr @ 15 PSI Operating Pressure: 15-25 PSI Maximum Operating Temperature: -20 to 225 F Note: *See General System Application for more Information 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

Mixer Module Assembly With Drive By Wire Gaseous Fuel Tuned Flow Air Inlet ECU Mounting Bracket (Optional) Venturi Mixer Module Electronic Control Unit Aluminum ECU Enclosure Manifold Adaptor (Optional) Sealed Connector Governor Motor Electronic Controlled Throttle Body 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

Mixer Module Assembly With Drive By Wire Gaseous Fuel General Specifications Mixer Module Assembly With Drive By Wire Gaseous Fuel Applications: Fixed RPM 1.0L-5.8L @ 1800 RPM* Mobile 1.0L-5.8L @ 3200 RPM* Generator Sets 5 kilowatt-100 kilowatt Flow Capability: 225 CFM @ 2.0” Hg Power: 7 HP- 140 HP Fuel Types: Propane / Natural Gas Venturi Sizes: 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm, 44mm, 46mm, 48mm, 50mm Regulator: Zero Pressure Regulator Temperature: -20 to 220 F Note: *See General System Application for more Information 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

Mixer Module Assembly With Manual Actuator Gaseous Fuel Tuned Flow Air Inlet Venturi Mixer Module Fuel Inlet Manifold Adapter (Optional) Manual Throttle Body 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

Mixer Module Assembly With Manual Actuator Gaseous Fuel Applications: Fixed RPM 1.0L-5.8L @ 1800 RPM* Generator Sets 5 kilowatt-100 kilowatt Flow Capability: 255 CFM @ 2.0” Hg Power: 7 HP- 140 HP Fuel Types: Propane / Natural Gas Venturi Sizes: 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm, 44mm, 46mm, 48mm, 50mm Regulator: Zero Pressure Governor Temperature: -20 to 220 F Note: *See General System Application for more Information 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

Electronic Control Unit ( ECU ) Multi-Function Electronic Control Unit ( ECU ) Multiple Mounting Methods Heavy Duty Aluminum Enclosure Sealed Connector Connector Shield 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

General Specifications Electronic Control Unit Power Input: 12 VDC ( 7-18 VDC ) Reverse Polarity Protection Power Consumption: 65 W Maximum Operating Temperature: -20 to 105 C Control Characteristics Control: Microprocessor with CAN Bus Speed Input: Magnetic Pickup, Ignition Coil Input or Digital Input MPU Input: 100 to 12,000 Hz IGN Input: 1, 2, 3, 4, 5, 6 & 8 Cylinder Engines with Rated Speeds of 50-5000 RPM Engine Type: 2 Cycle or 4 Cycle: Gasoline or Gaseous Fuel Target Speed: Programmable Actuator: High-Efficiency Toroid Governor 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

Dual Stage, Multi Function Gaseous Fuel Regulator Primary & Secondary Pressure- Adjustable or Tamper Resistant Unique Modular-Two Stage Coolant Inlet/ Outlet Inlet Port High Efficiency Coolant Heat Exchanger 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

General Specifications Dual Stage, Multi Function Gaseous Fuel Regulator Unique Modular-Multi-Function,Two Stage Inlet: Liquid Propane, Propane Vapor or Natural Gas Operating Inlet Pressure: 312 PSI Maximum Variable Positive Outlet Pressure or Zero Governor Positive Pressure Regulator: ( 312 PSI to +15 PSI ) Zero Pressure Regulator: ( 312 PSI to <1 PSI) Adjustable Pressure or Tamper Resistant Capacity: 5 HP-100 HP @ 15 PSI Output Pressure Environmental Operating Range: -20 to 225 F High Efficiency Coolant Heat Exchanger Integral Mounting Pads Inlet Port: 1/4” or 3/8 FNPT Outlet Port: 1/4” , 3/8 or 1/2” FNPT Coolant Inlet/ Outlet: 3/8” FNPT 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

Makes Return Lines to The Tank Obsolete FUEL CELL Fuel Pump Replacement Makes Return Lines to The Tank Obsolete Return Port Outlet Port Heat Exchanger Internal Pump & Pressure Accumulator Inlet Port 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

General System Applications Engine Size General System Applications 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

Custom Manifold Adaptors Options ECU Mounting Brackets Air Horn Types Electric Fuel Pumps Custom Manifold Adaptors 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

Standard & Custom Wire Harnesses 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555

Diagnostics in the Palm of your Hand Palm Pilot Unit & Software 14570 Industrial Park Road  Bristol  Virginia  24202  276-669-5555