Sales Meeting June 2006 Vogel Single Line Progressive Lubrication Systems Presented by: Ricardo Gomez

Single Line Progressive System Basic Features Description System distributes grease using progressive feeder valves Hydrostatically sealed spools output metered lubricant Output is a function of back pressure and pump flow Proportional distribution of lubricant Sequential feeding of lube points Operating pressure range: 10 – 200 bar Metered quantities: 0.08 – 3.6 cc Viscosity range: oil and fluid grease (20cSt – NLGI 3)

Progressive System Layout Grease Pump Controller Progressive Feeder with cycle switch Main Feeder Compared to piston distributors, progressive feeders do not operate in strokes – they deliver the amount delivered by the pump divided into the number and size of the pistons. They operate one after the other in a feeder.

Family of Progressive Feeders Typical applications: - oil circulating systems for presses - transfer lines - conveyors/chains - material handling - parts washer - etc.

Piston 4 is under pressure – piston 1 delivers lubricant to the outlet. Piston movement of 1 / 4 opened connection between main line and piston 5 Piston 5 is pressurized and piston 2 delivers lubricant to outlet 2a. Operating Principle (VP – VPK Series Prog. Feeders)

3 Outlets2 Outlets 1 Outlet 4 Outlets5 Outlets6 Outlets Series VP, VPB Progressive Feeder Set-up varieties

VPK Progressive Feeders Features

VPK Progressive Feeders Order Information

VPB Progressive Feeders Features

VPB Progressive Feeders Order Information

VP Progressive Feeders Features

VP Progressive Feeders Order Information

PSG 2 Progressive Feeders Features

PSG 3 Progressive Feeders Features

Variable quantity per outlet from cu. in. Blind elements for expansion or removal of segments Solid base plate construction-minimizing number of sealing elements-and consequently number of potential leakage points. Also, eliminates over tightening concerns of segmented block construction, which creates leakage. REMEMBER: Leakage in the block construction eliminates the monitoring feature of a progressive feeder-blocked line. That is, a blocked line cannot be detected if the seals associated with that outlet are leaking. PSG Modular Feeder Technology

Integrated check valves on every outlet ISO & SAE ports standard 10 mm / 3/8 “ tube accessible on outlet Check valves integrated into fittings with elastomeric seals Integrated bleed ports Captive O – rings. There are 81 loose o-rings in our competitors design. The PSG has Zero. Imagine the possibility of pinching or loosing an o-ring in during assembly. PSG Modular Feeder Technology

Common Metering elements-Conversion of Twin to Single accomplished is base plate Solid state piston sensing proximity switch Integrated filter possible Integral flow control valves are available - fixed and adjustable - optical or electrical feedback - pressure compensating - gear wheel flow control possible PSG Modular Feeder Technology

Ordering Information…..Information PSG Modular Feeder Technology

Pressure: bar Dosage:0,05 - 2,5 cm³ Number of Lube Points: Length of Main Line: max. 150 Meter Lubricants:Oil: mm²/s (cSt) Grease NLGI 000/00/1/2 Progressive System Layout for NLG1-2 System

-Instead of the whole system only zones, controlled areas by solenoid valves are supplying lubricant. The controller runs the zones in a configured order for a defined time. Zoned Progressive System

Progressive System for NLG1.2 calculation scheme 1,6 cm³/Hub 1,2 cm³/Hub 0,8 cm³/Hub Flow Rate of Pump: 0,5 cm³/min 0,4 0,8 0,6 Total Quantity all outlets: 1,6+1,2+0,8 = 3,6 cm³/Hub Total Quantity  Flow Rate of Pump = Pump operating time per cycle 3,6 cm³  0,5 cm³ = 7,2 min

Compact, robust design Integration of all essential elements Reservoir sizes from 2 to 10 liters Self monitoring and fault reports Suitable for biologically degradable greases KFGS PUMP FAMILY BrochureBrochure US

Piston Pump PFP-23-2 pneumatically operated For Grease up to NLGI-Kl. 2 Reservoir:1,5 kg Reservoir MaterialAcrylic Max. Operating Pressure:190 bar Max. Air Pressure:6 bis 10 bar Refill Nipple P3 P2 P1 Pressurized Air

Piston Pump PPU5 pneumatically operated For Oil and Grease up to NLGI-Kl.2 Lubricant Amount:0,1 bis 0,5 cm³/Hub Max. Operating Pressure:160 bar Operating Pressure for Pump:4,5 bis 10 bar Pressurized Air Connection Main Line Connection Vent outlet

Piston Pump PHU35-2,5W hydraulically operated Amount of Lubricant, adjustable:0,7 bis 3,5 cm³/Hub Reservoir: 5 Kg Reservoir Content:1,5 kg Reservoir material:Acrylic Max. Operating Pressure:160 bar Operating Pressure for Pump:20 bis 50 bar

Single Line Progressive Systems Advantages Rugged, versatile design Modular construction is possible Low cost monitoring of spool movement Disadvantages System design, layout and installation time and material intensive Field alterations of system are difficult Metering is a function of back pressure and velocity Low volume metering is not reliable Installation is costly Minimum volume – still large for total loss MTBF studies would indicate low up-time (multiplication factor) Series system Susceptible to air locks Additional possible leakage points

Thank you for your attention!