UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar AR 385-63 and SURFACE DANGER.

Slides:



Advertisements
Similar presentations
Module N° 6 – Prescription/Performance based environment.
Advertisements

Presented by: Mike Sisson February 23, It is the Law The Americans with Disabilities Act of It is the Right Thing to do Provide Equal Access.
SDZ Construction: Single Firing Point, Single Target
Emergency Preparedness and Response
SDZ Construction: Anti-Tank Rockets (AT-4)
MAJOR REPAIRS AND ALTERATIONS
The Army Safety Program
SDZ Construction: TOW Inter-service Resident Range Safety Course (Intermediate)
UNIT PHYSICAL SECURITY PLAN
Terminal Safety. Objectives Identify main causes Outline terminal safety organization State the safe working practices.
1 OSHA FEDERAL OCCUPATIONAL SAFETY AND HEALTH ACT (OSHA) OF 1970 George Mason University College of Nursing and Health Science Regulatory Requirements.
Florida Department of Transportation, November 2009
SDZ Construction: 120mm Tank Cannon Inter-service Resident Range Safety Course (Intermediate)
HERO UNIT Training Module Work Zone Traffic Control And Incident Management Operations.
Regulatory Body MODIFIED Day 8 – Lecture 3.
Presented to: HAI FIRC By: Hooper Harris, Manager, AFS-250 Date:February 2006 Federal Aviation Administration Operational Control Operations Specification.
Objectives Objectives: Food safety management systems
Rev: Section 1 Overview of Fall Protection.
Guidelines for Traffic Control at Surface Mines
HAZWOPER Overview.
SDZ Construction: Grenade Launcher (MK19)
EHS Management System Elements
The Management of Health & Safety at Work Regulations 1999
Module 3 Develop the Plan Planning for Emergencies – For Small Business –
Basics of OHSAS Occupational Health & Safety Management System
Commissioning of Fire Protection and Life Safety Systems Presented by: Charles Kilfoil Bechtel National Waste Treatment Plant Richland WA.
OSHA Office of Training and Education 1 Hazard Communication.
Presented to: 2012 Pacific Aviation Director’s Workshop, Guam By: Juan S.A. Reyes, A.C.E., ACSI Date: March 13-15, 2012 Federal Aviation Administration.
Federal Aviation Administration Southern Region FAASTeam CFI Special Emphasis Program Pilots Airworthiness Responsibilities Presented by: Mark L. Laughridge.
Roundabout Study and Design EDSM Revisions
Public Hearing Modifications to the Gated Community Ordinance Board of County Commissioners Presented by the Orange County Public Works Department February.
Unit 4: Functional Areas and Positions
29 WHY T-P-U ASSESSMENT RANGE OPERATIONS 29 SAFETY: RISK ASSESMENT: ENVIRONMENTAL CONSIDERATIONS:
Part 73 Special Use Airspace Subpart A General Special Use Airspace Defined dimensions –Vertical limits defined by designated altitude floors and.
Office of Traffic, Safety and Technology Module 5 Work Zone Plan Sets Module 5 Work Zone Plan Sets Traffic Control Plan Development Course.
Fire Officer 3 - Safety Programs1 Safety Program Development Fire Officer 3 Program Administration.
Organization and Implementation of a National Regulatory Program for the Control of Radiation Sources Regulatory Authority.
QUALITY MANAGEMENT STATEMENT
Protect the Force Through Risk Management 1. 2 INTRODUCTION The importance of attention to detail and the avoidance of complacency when using weapons.
LECTURE 4: ICAO CHART requirements
1 Permit Implementation Regulations Defines the phrase “significant change in the design or operation of a solid waste facility that is not authorized.
06/01/20161 Benny Hoff TÜV NORD Sweden AB AFS 2002:1 Use of pressure equipment.
Range Overlay MASTER GUNNER COURSE TERMINAL LEARNING OBJECTIVE ACTION: Construct a Range Overlay CONDITIONS: Given 1:25,000, scaled map, straight edge,
Construction zones and traffic control Objective Review extent of problem Identify contractor responsibilites Identify control plan components.
Standards for Technical Educators Occupational Safety & Health.
Site Control Instructional Goal The participant will see the need for a well-planned site control program and will experience some of the decision making.
North Carolina General Statute May 2009 Gary Thompson, PLS work
Fundamental Concepts for Design of Special Hazard and Fire Alarm Systems Chapter 1.
PERFORM THE TASKS AND FULFILL THE RESPONSIBILITIES OF RANGE PERSONNEL PO/EO: REF.: B-GL /TS-000, TRAINING SAFETY.
WORKSHOP ON ACCREDITATION OF BODIES CERTIFYING MEDICAL DEVICES INT MARKET TOPIC 6 CH 5 ISO MANAGEMENT RESPONSIBILITY Philippe Bauwin Medical.
Every employer must ensure, as far as is reasonable practicable, the health, safety and welfare of all his employees More specifically, employers must.
- HEMIC Facility Inspections. Common Losses A fire breaks out in a 16 story office building An employee had the tips of two fingers amputated Could these.
Safety 1 NRA Coach School: Safety. Gun Safety Rules and Safe Range Operations Knowledge Skill Attitude 2 NRA Coach School: Safety.
MBTA/MassDOT RAILROAD QUIET ZONES
Trench Hazards Introduce the module. Trenching & Excavations Continuing Education Third Quarter 2017 Session 3.
AR and SURFACE DANGER ZONES (SDZs).
FAA Flight Standards AFS-220/430 FPAW 2017 Summer
Current Event Brief!.
Controller and Evaluator Briefing
SAFE WORK INSTRUCTIONS
Lifting & Rigging Continuing Education Fourth Quarter 2016
Where We Are OVERVIEW Lesson 1: Course Overview
Personal Protective Equipment
Single Event Violations
SAFE WORK INSTRUCTIONS
Command Maintenance Discipline Program (CMDP) Overview
County Wide Safety Program
Command Maintenance Discipline Program (CMDP) Overview
The Army Maintenance Program at the Platoon/Section Level
Aerodrome Certification Workshop
Presentation transcript:

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar AR and SURFACE DANGER ZONES (SDZs)

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Agenda AR overview, Chapter 1 Ranges and Range Safety SDZ Breakdown

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar AR Safety – Policies and Procedures for Firing Ammunition for Training, Target Practice, and Combat, 15 November 1983 Clarifies requirements on ranges for: Officers in Charge Range Safety Officers Revised ballistic data for Surface Danger Zones Incorporates new standardized range designs Clarifies combined arms live fire exercises

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar AR Purpose “To prescribe general safety precautions necessary to minimize the possibility of accidents in the firing and other uses of ammunition and explosives by troops in training, target practice, and as much as possible, combat and range operations…”

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Surface Danger Zones Instructions and dimensions for SDZ's will be developed and specific danger areas will be indicated. The depicted surface danger zones are the minimum requirements. The SDZ dimensions listed are only adequate when employed with properly functioning safety equipment and devices, and when trained and competent personnel follow firing procedures.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar What if the SDZ doesn’t fit? General firing requirements will be followed. Under certain conditions, specific types of firings may be conducted at locations having less land or air area than required. Units will be directed to employ additional controls and will be limited in the type of firings. Waivers must be requested.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Waivers A departure from regulatory requirements in accordance with AR

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Waiver Authority The following persons may waive safety criteria of AR if it is acceptably safe and is in the best interest of the United States: MACOM Commander Superintendent, USMA Chief, National Guard Bureau Commanding General, Fleet Marine Force, Atlantic and Pacific

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Waive Only What You Own The Waiver Authority can only waive what he or she owns: Airspace requirements may be waived by the Federal Aviation Administration (FAA) or comparable host nation agency Water traffic requirements, as they apply to firing over navigable waters are waived by the U.S. Army Corps of Engineers or comparable host nation agency If in a host nation, the more stringent regulations must be followed

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Delegating Authority

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Delegated Waiver Authority Can reduce the dimensions of surface danger areas when the terrain, artificial barriers, or other controlling factors make smaller areas safe Can modify prescribed firing procedures appropriate to the training of participating troops to increase realism inn training.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar SDZ Waiver Bottom Line Projectiles or debris caused by firing ammunition or explosives must be contained within the boundaries of the surface danger zone. Only personnel thoroughly trained and qualified in firing ammunition…will take part in combat firing and combined arms exercises.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Assistance with Waiver Minimum Requirements A statement citing the paragraph of the regulation to be waived. Description of conditions, scaled maps showing distances to internal and external exposures, topographical maps of the area, personnel involved, and facilities exposed. The type of ammunition and weapons as identified in proper technical manuals. Map coordinates of the firing position and quadrant elevation of fire. The firing position and direction of fire will be plotted on the scaled map and a scaled surface danger zone will be shown in meters.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Assistance with Waiver Minimum Requirements An SOP for firing and range control. Other precautions that will be taken to achieve safety in operations to fully compensate for the lack of compliance with this regulation. Profiles through the gun-target-line showing the relative elevation of the piece to be fired, the target, and earthen backstop, if any. Also, furnish profiles from the firing position through the right and left limits of fire. A MACOM position statement recommending approval or disapproval or modification of the basic request for training.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Range Safety Installation commanders will establish a range safety program. Appoint qualified range control personnel to monitor and enforce range safety and operational requirements. Installations will publish local SOPs for the safe operation and use of ranges and training facilities. Coordinate and schedule all firing. Notify installation personnel and the public of firing and exercises involving possible hazards to the public.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Range Safety Continued Establish procedures for controlling and coordinating use of airspace. Survey and post range boundaries and off- limit areas to prevent trespass and entry by unauthorized personnel into surface danger zones and impact areas. Post range guards, barriers, limit of fire markers, and signals. Investigate incidents or accidents involving weapons or ammunition with firingg units.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Range Records Maintain detailed records that – Describe the range area, including detailed permanent charts and overlays. Provide information on the types and amounts of ammunition fired into the range areas. Record known or estimated number of duds located in range impact areas.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Airspace Safety Requirements Airspace control measures and coordination required for any range where the maximum ordinate of any ammunition will exceed 45 meters above ground level. Establish a vertical danger zone for firing operations when maximum ordinate exceeds 45 meters above ground level.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Notice of Firing Before firing involving possible hazard to the public, the commander will issue a warning order through the public news media. Date and time of firing, and describe the boundaries of the range area. Commander will enforce all closed danger areas involving possible hazard to the public. A warning order will be published and issued to the entire population of the installation at least 24 hours in advance.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Trespassing on Range Areas Precautions will be taken to prevent – All unauthorized persons from entering the surface danger zone before firing. Trespassing on target ranges during firing. Handling or removal of unexploded ammunition (dud) by unauthorized personnel. Livestock may be excluded unless agreements have been made in writing with the owner or owners.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Warning Signals and Signs Persons approaching a firing area in use will be warned. Scarlet danger flags and, when necessary, warning signs will be displayed at appropriate points. Scarlet streamer will be used during daylight hours, and a blinking red light during night hours will be displayed from a prominent point for a range complex at all times during firing. No firing will take place unless these conditions are met.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Warning Signals and Signs Continued Limit of fire markers both external (outer) and internal (inner) will be emplaced to denote right and left limits of fire.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Warning Signals and Signs Continued The boundaries of all range areas adjacent to roadways and points of entry, or along the outside limits of ricochet areas will be posted with permanent signs. The signs will be placed at 200 meter intervals or less, or in a way that will insure that a person cannot enter the range without seeing at least one sign within a legible distance. Hilly or wooded terrain may require more signs than would flat, open terrain. The design, color, and size will conform to guidance in AR

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Education Commanders will place special emphasis on aggressive educational programs. Local news media will be used periodically to warn the nearby communities of the hazards in trespassing on range areas and in handling unexploded ammunition.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Ammunition and Weapons Current Field and Technical Manuals for the ammunition and weapons to be fired must be on the range during firing. No new production discarding sabot rounds will be fired over the head of unprotected troops. When any round or item of ammunition or explosives (or their components) has malfunctioned, further use of rounds or items will be locally suspended.

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Small Arms and Machine Guns Surface Danger Zone building basics Batwing or New Methodology Single firing point to a single stationary target Step by Step batwing building

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar SDZ Angles, Areas, Distances and Lines Drawing Data Distance X Distance Y Distance W Area A Area B Cap Firing point Target Gun Target Line (GTL) Dispersion area Angle P Angle Q Ricochet area

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Drawing Data Drawing by: Scale: Drawing by: Scale: Weapon: Ammunition caliber: Ammunition type: Distance X: Date drawn: Verified by: Weapon: Ammunition caliber: Ammunition type: Distance X: Date drawn: Verified by: Other data may be added as necessary to clarify the drawing

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Firing Position Distance X Firing Position – the firing position is where a weapon system will engage a target from. Initially, we will start with only one firing position and build from there in later slides throughout the class. Gun Target Line (GTL) Target Firing Point

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Target Location Distance X Target Location – the point or location within the surface danger zone where a target is emplaced for weapon system engagement. The target is identified Gun Target Line (GTL) along the gun target line at the scaled range to target. Target Firing Point

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Gun Target Line (GTL) Gun Target Line (GTL) – is drawn from the firing Distance X position through the target area. Its length is equal to Distance X (next slide). Gun Target Line (GTL) Target Firing Point

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Distance X Distance X – The maximum distance a projectile will travel when fired or launched at a given quadrant elevation with a given charge or propulsion system. Typically, plan 10 o for super elevation Gun Target Line (GTL) Target Firing Point

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Cap Distance X Cap Cap – the cap is drawn with a compass where the point of the compass is placed on the firing position and the radius is set to Distance X. It is drawn across the top or end of the Gun Target Line, and creates the downrange end of the Gun Target Line (GTL) Target dispersion area. Firing Point

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Dispersion Area Distance X Dispersion Area – the area within the surface Dispersion Area Gun Target Line (GTL) danger zone located between the gun target line and the ricochet area. This area accounts for human error, gun/cannon tube wear, propellant temperature, etc. Unless otherwise directed, Target dispersion area will be 5 o on either side of the Gun Target Line (GTL) Firing Point

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Distance Y Distance X Distance Y – the maximum distance downrange at which a lateral ricochet is expected to occur when a projectile is fired at a given quadrant elevation. Gun Target Line (GTL) Distance Y Target Firing Point

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Angle P Distance X Angle P – is the beginning angle for the ricochet area measured from the firing point downrange along the edge of the dispersion area. It is only used on the Batwing Surface Danger Zone. Gun Target Line (GTL) Target Angle P Firing Point

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Angle Q Distance X Angle Q – this is the angle measurement downrange, beginning at Angle Q the end of Distance Y along the edge of the dispersion area. It is measured along distance Y outward from the dispersion area on Batwing Surface Danger Gun Target Line (GTL) Target Zones. Firing Point

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Distance W Distance X Distance W – is the distance between the outside edge or border of the ricochet area and the outside edge or border of the dispersion area on Batwing Surface Danger Zones. It is drawn parallel to the outside edge of the dispersion area between where the Distance W line crosses Angle P and Distance W Angle Q. All excess lines are erased. Firing Point

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Ricochet Area Distance X Ricochet Area – the area located to the left and right of the dispersion area Ricochet Area which contains projectiles after making initial contact with the target medium. For surface danger zones having angles P and Q, it is Gun Target Line (GTL) also the area located to the left and right of the dispersion area. The ricochet area is defined by Target Distance W. Firing Point

UNCLASSIFIED Ready Thru Training! Joint Multinational Training Command UNCLASSIFIED Training Area and Range Management Seminar Questions