MAIN MENU X WWW Click to start New Queensland Licensing Pathway QUIT X New Queensland Licensing Pathway Introduction SECTION 1 – Conduct routine checks SECTION 2 – Plan work Links have been disabled. Use your Enter button or mouse click to move to next screen. SECTION 3 – Check controls & equipment SECTION 4 – Shift load SECTION 5 – Shut down equipment CONTACT EASY GUIDES WWW EASY GUIDES ONLINE Hand & whistle signals Click to start
A minimum 16mm diameter rope is used for tag lines 16mm diameter of dry and non-conductive material is the minimum size tag line to be used for controlling loads.
Hazards to incorporate into a work plan The following hazards should be considered for inclusion into a work plan. overhead services surrounding structures other equipment dangerous materials facilities obstructions
Stopping the lower hook block from striking the hoist drum or structure A limit switch prevents the lower hook block from striking the hoist drum or structure.
The SWL should be printed on the bridge of the crane