1. MAIN MENU X WWW Click to start
QUIT X
Use the menu below to jump to a particular section
or use the arrow at the bottom of the screen to begin at the start.
New Queensland Licensing Pathway
Introduction
SECTION 1 – Site Hazards
SECTION 2 – Cranes
Links have been disabled. Use your Enter button or mouse click to move to next screen.
SECTION 3 – Lifting Gear
SECTION 4 – Slinging and Moving Loads
Written Assignment
Hand and Whistle Signals
CONTACT
EASY
GUIDES
WWW
EASY GUIDES
ONLINE
Rope Work – Whipping, Splicing, Bends and Hitches
Click to start

2. Remove and return synthetic slings with no tag
WRONG
RIGHT
Tag
No tag. DO NOT USE. Return to
manufacturer for testing and retagging.
Sling with tag.
If you find a flat webbing synthetic sling that has the information tag removed you should tag the sling as unserviceable, remove it from service and return it to the manufacturer for testing and retagging.

3. DO NOT snig a load on a crane
You are not allowed to snig a load on a crane.
Snigging can cause structural damage to the crane.
Snigging can cause the load to swing uncontrollably towards the crane.
Snigging can cause damage to the load.
Snigging can turn the load over.
Snigging can damage the sling.

4. Hoisting a worker in a crane lift box
If a crane lift box is used to hoist a worker the person dogging the load must be in the lift box with the worker.
[Extra information: Before lifting a person with
a lift box you should have:
1. A lift plan,
2. Data plate with Safe
Working Load (SWL)
marked on the box.]
An example of a lift box.
MAIN
MENU
NEXT
PREV

5. Faults that condemn a fibre rope
The following faults will condemn a fibre rope for safe use for lifting purpose:
brittleness
discolouration due to excessive heat
mildew
sun-rot