PICK THE DESIRED CONFIGURATION & PRESS OK TO CONTINUE

Dimension and weight choice (s)

UNITS CAN BE CHANGED ANYTIME CHOOSE DESIRED UNITS & PRESS OK

CHOOSE TRUCK & CAB TYPE THEN PRESS NEXT

OPTIONAL DATA DROP SCREEN CLICK ON THE OPTIONAL INFO TAB TO REVEAL THE NEXT SCREEN

INFORMATION (EXCEPT FOR THE DATE) ALWAYS COMES UP WITH LAST INFORMATION THAT WAS ENTERED – CHANGE ACCORDINGLY

FILL IN THE BOXES TO RELATE TO THE SKETCH WHEELBASE CAB TO AXLE BODY LENGTH TAB TO MOVE BOX TO BOX

FILL IN THE BOXES TO RELATE TO THE SKETCH WHEELBASE CAB TO AXLE BODY LENGTH INFO TO BE ENTERED BLUE IN ENTRY BOX RED ON SKETCH COINCIDE WITH EACH OTHER TAB TO MOVE BOX TO BOX

DATA NOT REQUIRED BUT IF USED GIVES YOU A BETTER PERSPECTIVE TO THE FINAL OUTCOME!

IF USING TO CALCULATE FOR WHEELBASE CLICK THE OPTIONAL INFO TAB

SINGLES OR DUALS ON DRIVE (S) WEIGHT OF DRIVE (S) C/W: -BOGIE /SUSPENSION INSERT -SUSPENSION -DRIVE AXLE (S) C/W FOUNDATION BRAKES, HUBS DRUMS, TIRES, DISCS ETC. COMMONLY USED FIQURES – # SINGLE 2500 POUNDS # TANDEM 5000 POUNDS # SINGLE 2180 POUNDS # TANDEM 4600 POUNDS

DESIGN GVWR DESIGN GAWR (S)

ENTER FRAME HEIGHT OF CHASSIS, GROUND TO TOP!

ENTER FRAME HEIGHT OF CHASSIS, GROUND TO TOP! CHASSIS C of G FROM GROUND OR CHASSIS DATUM HEIGHT!

ENTER FRAME HEIGHT OF CHASSIS, GROUND TO TOP! CHASSIS C of G FROM GROUND OR CHASSIS DATUM HEIGHT! LATERAL C of G OF CHASSIS OPTIONAL

ENTER FRAME HEIGHT OF CHASSIS, GROUND TO TOP! CHASSIS C of G FROM GROUND OR CHASSIS DATUM HEIGHT! LATERAL C of G OF CHASSIS OPTIONAL CLICK FINISH YOU NOW HAVE A COMPLETED CHASSIS

ALWAYS GOOD IDEA TO SAVE CHASSIS SEPERATELY FOR FUTURE USE

NOW A BODY AND ACCESSORIES CAN BE ADDED TO THE CHASSIS

CHOOSE FROM THE DATABASE YOU’VE CREATED

OR CREATE & ADD TO YOUR DATABASE USING OPTION #2

CHOOSE FROM THE DATABASE YOU’VE CREATED OR CREATE & ADD TO YOUR DATABASE USING OPTION #2 PICK BODY TYPE

CHOOSE FROM THE DATABASE YOU’VE CREATED OR CREATE & ADD TO YOUR DATABASE USING OPTION #2 PICK BODY TYPE

CHOOSE FROM THE DATABASE YOU’VE CREATED OR CREATE & ADD TO YOUR DATABASE USING OPTION #2 PICK BODY TYPE CLICK ADD TO ADD IT TO THE VEHICLE YOUR CREATING

BODY NOW INSTALLED – WEIGHT NOW ADJUSTED ACCORDINGLY

ACCESSORIES CAN BE ADDED FROM YOUR DATABASE

ACCESSORIES CAN BE ADDED FROM YOUR DATABASE OR CREATE & ADD TO YOUR DATABASE USING OPTION #2

ACCESSORIES CAN BE ADDED FROM YOUR DATABASE OR CREATE & ADD TO YOUR DATABASE USING OPTION #2 ACCESSORIES CAN BE “BUILT” USING SHAPES

ACCESSORIES CAN BE ADDED FROM YOUR DATABASE OR CREATE & ADD TO YOUR DATABASE USING OPTION #2 ACCESSORIES CAN BE “BUILT” USING SHAPES ACCESSORIES CAN ALSO BE POINT LOCATION

A1 TWO SEATING POSITIONS ACCESSORIES ARE ADDED TO YOUR VEHICLE BY CLICKING ACCESSORY, ADD, THEN SLIDING IT INTO POSITION

A2 FUEL A1 TWO SEATING POSITIONS ACCESSORIES ARE ADDED TO YOUR VEHICLE BY CLICKING ACCESSORY, ADD, THEN SLIDING IT INTO POSITION

A2 FUEL A1 TWO SEATING POSITIONS A3 TAILGATE LOADER ACCESSORIES ARE ADDED TO YOUR VEHICLE BY CLICKING ACCESSORY, ADD, THEN SLIDING IT INTO POSITION

LOADS ARE ADDED TO YOUR VEHICLE BY CLICKING LOAD, ADD, THEN SLIDING IT INTO POSITION

L1 PAYLOAD LOADS ARE ADDED TO YOUR VEHICLE BY CLICKING LOAD, ADD, THEN SLIDING IT INTO POSITION

A COMPLETED VEHICLE WITH ACCESSORIES AND LOAD

PRINTOUT SHOWING ALLOWABLE DESIGN PAYLOAD

PRINTOUT SHOWS WT. DISTRIBUTION & C of G CALCULATION

SHOWS COMPLEXITY OF WHAT CAN BE ACCOMPLISHED!! SIDE VIEW

TOP VIEW

UNLIMITED ENTRY SPACE FOR ACCESSORIES

CLICK AND DRAG FEATURE FOR SOLVING FOR WHEELBASE CLICK ONTO DRIVE AXLE, SLIDE TO SOLVE FOR WHEELBASE, WEIGHTS RE-CALCULATE AS YOU SLIDE. WHEELBASE DIMENSIONS TURNS BLUE WHEELBASE CAN SLIDE EITHER WAY