ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems DCN Next Gen 1 DCNNG SPCC PO SPC 02.Oct.05 Single PC  High Performance PC  Windows® 2000, or XP. (Professional Edition)  Direct connection with CCU allows PC to communicate with DCN system

ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems DCN Next Gen 2 DCNNG SPCC PO SPC 02.Oct.05 Requirements  Pentium II processor or higher  48 Mbytes of Random Access Memory (RAM) or more (at least 32 Mbytes)  Hard Disk 1 Gbytes or more with a data access time of <10 ms.  Cache memory 256 Kbytes or more.  Floppy disc drive: 3.5” 1.44 MB.  Video card supporting at least VGA and SVGA resolution high or true colours (256 minimal) Video memory at least 1 Mbytes.  Free RS-232 port for direct connection to CCU.  2 x Serial ports (4 Serial ports recommended if a Chip-card encoder is used)  1 x Parallel ports for connection to optional equipment.  Local Bus mouse port for Serial 2- button mouse.  Keyboard.  Optional equipment : Printer (parallel and / or serial) Chip Card encoder IMPORTANT: The operator has no connection to the PC for headphone or intercom handset. Additional DCN hardware is required for the operator if these functions are required. DCN table- top or flush mounted hardware depending on the requirements can be used.

ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 3 DCNNG SPCC PO SPC 02.Oct.05 Single PC Control End of section SPCC PO Menu