1. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 1 DCNNG IO SA CC 22.Mar.06 How to configure DCNNG & Stand Alone Camera Control  This presentation is intended to guide the installer step by step through camera control installation. Mr. Peetroons Belgium DCNNG CC

2. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 2 DCNNG IO SA CC 22.Mar.06 How to configure DCNNG & Stand Alone Camera Control  DCN-CCUB with direct Camera Control & Virtual Keyboard DCN-CCUB with direct Camera Control & Virtual Keyboard  DCN-CCUB with direct Camera Control & Autodome Controller DCN-CCUB with direct Camera Control & Autodome Controller  DCN-CCUB with Allegiant Video Switcher DCN-CCUB with Allegiant Video Switcher  DCN-CCU with direct Camera & Virtual Keyboard DCN-CCU with direct Camera & Virtual Keyboard  DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with direct Camera Control & Autodome Controller  DCN-CCU with Allegiant Video Switcher DCN-CCU with Allegiant Video Switcher

3. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 3 DCNNG IO SA CC 22.Mar.06 DCN-CCUB with direct Camera Control & Virtual Keyboard  Requirements: One AutoDome Camera One monitor Virtual keyboard software LTC 5138/00 DCN-CCUB Temporary Installation PC Camera Control Software LBB 4162/xx

4. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 4 DCNNG IO SA CC 22.Mar.06 Step 1  Connecting PC and Monitor to AutoDome Camera RS232 I & U Instructions Temporary Installation PC Temporary Installation PC Make sure that the Dome camera has an address.

5. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 5 DCNNG IO SA CC 22.Mar.06 Step 2  Install virtual keyboard software LTC 5138/00 I & U Instructions AutoDome Camera Temporary Installation PC Temporary Installation PC

6. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 6 DCNNG IO SA CC 22.Mar.06 Step 3  Configure Virtual Keyboard

7. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 7 DCNNG IO SA CC 22.Mar.06 Step 4  Communication Setup

8. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 8 DCNNG IO SA CC 22.Mar.06 Step 5  Make sure you choose the right camera!

9. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 9 DCNNG IO SA CC 22.Mar.06 Step 6

10. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 10 DCNNG IO SA CC 22.Mar.06 Step 7  Quick Commands settings

11. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 11 DCNNG IO SA CC 22.Mar.06 Step 8  Pre-Position Title Set

12. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 12 DCNNG IO SA CC 22.Mar.06 Step 9  Set Pre-Positions

13. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 13 DCNNG IO SA CC 22.Mar.06 Step 10  Pre-Position Shot Name

14. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 14 DCNNG IO SA CC 22.Mar.06 Repeat Repeat Steps 9 &10 to set all Pre-Positions Set the highest Pre-Position as overview

15. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 15 DCNNG IO SA CC 22.Mar.06 Step 11  Check the Pre-Positions To NEXT >>>>>>

16. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 16 DCNNG IO SA CC 22.Mar.06 End of how to configure: DCN-CCUB with direct Camera Control & Virtual Keyboard  DCN-CCUB with direct Camera Control & Autodome Controller DCN-CCUB with direct Camera Control & Autodome Controller  DCN-CCUB with Allegiant Video Switcher DCN-CCUB with Allegiant Video Switcher  DCN-CCU with direct Camera & Virtual Keyboard DCN-CCU with direct Camera & Virtual Keyboard  DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with direct Camera Control & Autodome Controller  DCN-CCU with Allegiant Video Switcher DCN-CCU with Allegiant Video Switcher

17. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 17 DCNNG IO SA CC 22.Mar.06 DCN-CCUB with direct Camera Control & Autodome Controller  Requirements: One AutoDome Camera One monitor Autodome Controller LTC 5136/51 DCN-CCUB Temporary Installation PC Camera Control Software LBB 4162/xx

18. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 18 DCNNG IO SA CC 22.Mar.06 Step 1 Only for Pre setting the Autodome Camera with the Autodome Controller  Connect Autodome Controller to data converter LTC 5136/51  Connect Data converter to Aurodome Camera  Connect Autodome Camera to Monitor IUI Autodome Temporary Autodome Controller Temporary Autodome Controller Data Converter AutoDome Camera For Installation and User Instructions Autodome Controller

19. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 19 DCNNG IO SA CC 22.Mar.06 Remark  If you were not successful setting up the pre-positions please don’t continue with the next steps.  First make sure that the pre-positions are set.

20. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 20 DCNNG IO SA CC 22.Mar.06 Step 2  Connect CCUB to PC RS232 I & U Instructions Temporary Installation PC Temporary Installation PC Port 1 Camera Control Protocol Baudrate 9.6K Port 1 Camera Control Protocol Baudrate 9.6K

21. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 21 DCNNG IO SA CC 22.Mar.06 Port 1 You have to change the port settings ! Protocol = Camera Control Baudrate= 9.6K Step 3  CCU protocol and Serial Port settings DCN-CCUB Make sure that the ports of the CCU are set correct. S500 Dip switches I & U Instructions

22. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 22 DCNNG IO SA CC 22.Mar.06 Step 4  Install DCNNG Stand Alone Camera Control software LBB4162

23. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 23 DCNNG IO SA CC 22.Mar.06 Step 5  Install Camera Control software LBB4162

24. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 24 DCNNG IO SA CC 22.Mar.06 Step 6  Install Camera Control software LBB4162

25. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 25 DCNNG IO SA CC 22.Mar.06 Step 7  Install Camera Control software LBB4162

26. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 26 DCNNG IO SA CC 22.Mar.06 Step 8  Select the language for operator

27. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 27 DCNNG IO SA CC 22.Mar.06 Step 9  Select no use of Allegiant VideoSwitcher

28. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 28 DCNNG IO SA CC 22.Mar.06 Step 10  Installing DCNNG Stand Alone Camera Control software LBB4162

29. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 29 DCNNG IO SA CC 22.Mar.06 Step 11  Finish installation

30. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 30 DCNNG IO SA CC 22.Mar.06 Step 12  Start DCN Next Generation Camera Install

31. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 31 DCNNG IO SA CC 22.Mar.06 Step 13  Combine seat numbers with camera pre positions LBB4162

32. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 32 DCNNG IO SA CC 22.Mar.06 Step 14  Make sure you choose the right camera!! Camera nr = Camera Address LBB4162

33. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 33 DCNNG IO SA CC 22.Mar.06 Step 15  Insert LBB4162

34. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 34 DCNNG IO SA CC 22.Mar.06 Step 16  Stop Camera Installation 5 LBB4162

35. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 35 DCNNG IO SA CC 22.Mar.06 Step 17  Connect CCUB to AutoDome Camera AutoDome Camera I & U Instructions RS232 Baudrate 9.6K Port 1 Camera Control Protocol Baudrate 9.6K Port 1 Camera Control Protocol Baudrate 9.6K

36. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 36 DCNNG IO SA CC 22.Mar.06 End of how to configure: DCN-CCUB with direct Camera Control & Autodome Controller  DCN-CCUB with Allegiant Video Switcher DCN-CCUB with Allegiant Video Switcher  DCN-CCU with direct Camera & Virtual Keyboard DCN-CCU with direct Camera & Virtual Keyboard  DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with direct Camera Control & Autodome Controller  DCN-CCU with Allegiant Video Switcher DCN-CCU with Allegiant Video Switcher

37. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 37 DCNNG IO SA CC 22.Mar.06 DCN-CCUB with Allegiant Video Switcher  Requirements: Allegiant switcher Video Switcher keyboard Fixed and/or AutoDome cameras Monitor(s) DCN-CCUB Temporary Installation PC Camera Control Software LBB 4162/xx

38. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 38 DCNNG IO SA CC 22.Mar.06 Step 1  Connecting system hardware BOSCH Temporary Installation PC Temporary Installation PC

39. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 39 DCNNG IO SA CC 22.Mar.06 DCN-CCU Step 2  Connect DCN-CCUB & Allegiant Switcher to Temporary PC RS232 Baudrate 19.2K Camera Control Protocol I & U Instructions Baudrate 19.2K Allegiant Switcher Allegiant Switcher

40. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 40 DCNNG IO SA CC 22.Mar.06 Port 1 You have to change the port settings ! Protocol = Camera Control Baudrate= 19.2K Step 3  CCU protocol and Serial Port settings DCN-CCUB Make sure that the ports of the CCU are set correct. S500 Dip switches I & U Instructions

41. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 41 DCNNG IO SA CC 22.Mar.06 Step 4  Install DCNNG Stand Alone Camera Control software LBB4162

42. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 42 DCNNG IO SA CC 22.Mar.06 Step 5  Installing DCNNG Stand Alone Camera Control software LBB4162

43. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 43 DCNNG IO SA CC 22.Mar.06 Step 6  Installing DCNNG Stand Alone Camera Control software LBB4162

44. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 44 DCNNG IO SA CC 22.Mar.06 Step 7  Installing DCNNG Stand Alone Camera Control software LBB4162

45. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 45 DCNNG IO SA CC 22.Mar.06 Step 8  Select the language for operator

46. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 46 DCNNG IO SA CC 22.Mar.06 Step 9  Select use Allegiant VideoSwitcher

47. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 47 DCNNG IO SA CC 22.Mar.06 Step 10  Installing DCNNG Stand Alone Camera Control software LBB4162

48. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 48 DCNNG IO SA CC 22.Mar.06 Step 11  Finish installation

49. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 49 DCNNG IO SA CC 22.Mar.06 Step 12  Set Pre-Positions using the Video Switcher Keyboard

50. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 50 DCNNG IO SA CC 22.Mar.06 Step 13  Start DCN Next Generation Camera Install

51. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 51 DCNNG IO SA CC 22.Mar.06 Step 14  Combine seat numbers with camera pre positions LBB4162

52. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 52 DCNNG IO SA CC 22.Mar.06 Step 15  Make sure you choose the right camera!! Camera nr = Camera Address LBB4162

53. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 53 DCNNG IO SA CC 22.Mar.06 Step 16  Insert LBB4162

54. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 54 DCNNG IO SA CC 22.Mar.06 Step 17  Stop Camera Installation 5 LBB4162

55. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 55 DCNNG IO SA CC 22.Mar.06 Step 19  Connecting hardware (Remove temporary PC!) BOSCH See next slide Temporary Installation PC Temporary Installation PC

56. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 56 DCNNG IO SA CC 22.Mar.06 Step 19  Connection cable between CCU and Allegiant Switcher I & U Instructions

57. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 57 DCNNG IO SA CC 22.Mar.06 End of how to configure: DCN-CCUB with Allegiant Video Switcher  DCN-CCU with direct Camera & Virtual Keyboard DCN-CCU with direct Camera & Virtual Keyboard  DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with direct Camera Control & Autodome Controller  DCN-CCU with Allegiant Video Switcher DCN-CCU with Allegiant Video Switcher

58. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 58 DCNNG IO SA CC 22.Mar.06 DCN-CCU with direct Camera & Virtual Keyboard  Requirements: One AutoDome Camera One monitor Virtual keyboard software LTC 5138/00 DCN-CCU Temporary Installation PC Camera Control Software LBB 4162/xx

59. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 59 DCNNG IO SA CC 22.Mar.06 Step 1  Connect PC and Monitor to the Dome Camera RS232 I & U Instructions Temporary Installation PC Temporary Installation PC Make sure that the Dome camera has an address.

60. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 60 DCNNG IO SA CC 22.Mar.06 AutoDome Camera Step 2  Install virtual keyboard software LTC 5138/00 I & U Instructions Temporary Installation PC Temporary Installation PC

61. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 61 DCNNG IO SA CC 22.Mar.06 Step 3  Configure Virtual Keyboard

62. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 62 DCNNG IO SA CC 22.Mar.06 Step 4  Communication Setup

63. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 63 DCNNG IO SA CC 22.Mar.06 Step 5  Make sure you choose the right camera!!

64. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 64 DCNNG IO SA CC 22.Mar.06 Step 6

65. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 65 DCNNG IO SA CC 22.Mar.06 Step 7  Quick Commands settings

66. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 66 DCNNG IO SA CC 22.Mar.06 Step 8  Pre-Position Title Set

67. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 67 DCNNG IO SA CC 22.Mar.06 Step 9  Set Pre-Positions

68. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 68 DCNNG IO SA CC 22.Mar.06 Step 10

69. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 69 DCNNG IO SA CC 22.Mar.06 Repeat Repeat Step 9 & 10 to set all Pre-Positions Set the highest Pre-Position as overview

70. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 70 DCNNG IO SA CC 22.Mar.06 Step 11  Check the Pre-Positions To NEXT >>>>>>

71. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 71 DCNNG IO SA CC 22.Mar.06 End of how to configure: DCN-CCU with direct Camera & Virtual Keyboard  DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with direct Camera Control & Autodome Controller  DCN-CCU with Allegiant Video Switcher DCN-CCU with Allegiant Video Switcher

72. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 72 DCNNG IO SA CC 22.Mar.06 DCN-CCU with direct Camera Control & Autodome Controller  Requirements: One AutoDome camera Monitor(s) Autodome Controller LTC 5136/51 DCN-CCU Temporary Installation PC Camera Control Software LBB 4162/xx

73. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 73 DCNNG IO SA CC 22.Mar.06 AutoDome Camera Step 1 Only for Pre setting the Autodome Camera with the Autodome Controller  Connect Autodome Controller to data converter LTC 5136/51  Connect Data converter to Aurodome Camera  Connect Autodome Camera to Monitor IUI Autodome Temporary Autodome Controller Temporary Autodome Controller Data Converter For Installation and User Instructions Autodome Controller

74. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 74 DCNNG IO SA CC 22.Mar.06 Remark  If you were not successful setting up the pre-positions please don’t continue with the next steps.  First make sure that the pre-positions are set.

75. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 75 DCNNG IO SA CC 22.Mar.06 Port 2 Camera Control Protocol Baudrate 9.6K Port 2 Camera Control Protocol Baudrate 9.6K Step 2  Connect CCU to PC RS232 I & U Instructions Temporary Installation PC Temporary Installation PC

76. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 76 DCNNG IO SA CC 22.Mar.06 Step 3  CCU protocol and Serial Port settings DCN-CCU Make sure that the ports of the CCU are set correct. Port 1 Protocol = Full Baudrate= 115.2K Port 2 Protocol = Camera Control Baudrate= 9.6K Keep in mind !! You have to change the baudrate of Port 2 to 9.6K !! S500 Dip switches I & U Instructions

77. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 77 DCNNG IO SA CC 22.Mar.06 Step 4  Make sure you connect the RS232 cable to Port 2 of the DCN-CCU.

78. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 78 DCNNG IO SA CC 22.Mar.06 Step 5  Install DCNNG Stand Alone Camera Control software LBB4162

79. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 79 DCNNG IO SA CC 22.Mar.06 Step 6  Install Camera Control software LBB4162

80. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 80 DCNNG IO SA CC 22.Mar.06 Step 7  Install Camera Control software LBB4162

81. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 81 DCNNG IO SA CC 22.Mar.06 Step 8  Install Camera Control software LBB4162

82. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 82 DCNNG IO SA CC 22.Mar.06 Step 9  Select the language for operator

83. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 83 DCNNG IO SA CC 22.Mar.06 Step 10  Select no use of Allegiant VideoSwitcher

84. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 84 DCNNG IO SA CC 22.Mar.06 Step 11  Installing DCNNG Stand Alone Camera Control software LBB4162

85. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 85 DCNNG IO SA CC 22.Mar.06 Step 12  Finish installation

86. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 86 DCNNG IO SA CC 22.Mar.06 Step 13  Start DCN Next Generation Camera Install

87. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 87 DCNNG IO SA CC 22.Mar.06 Step 14  Combine seat numbers with camera pre positions LBB4162

88. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 88 DCNNG IO SA CC 22.Mar.06 Step 15  Make sure you choose the right camera!! Camera nr = Camera Address LBB4162

89. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 89 DCNNG IO SA CC 22.Mar.06 Step 16  Insert LBB4162

90. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 90 DCNNG IO SA CC 22.Mar.06 Step 17  Stop Camera Installation 5 LBB4162

91. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 91 DCNNG IO SA CC 22.Mar.06 AutoDome Camera Step 18  Connect CCU to AutoDome Camera I & U Instructions RS232 Baudrate 9.6K Port 2 Camera Control Protocol Baudrate 9.6K Port 2 Camera Control Protocol Baudrate 9.6K

92. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 92 DCNNG IO SA CC 22.Mar.06 End of how to configure: DCN-CCU with direct Camera Control & Autodome Controller  DCN-CCU with Allegiant Video Switcher DCN-CCU with Allegiant Video Switcher

93. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 93 DCNNG IO SA CC 22.Mar.06 DCN-CCU with Allegiant Video Switcher  Requirements: Allegiant switcher Video Switcher keyboard Fixed and/or AutoDome cameras Monitor(s) DCN-CCU Temporary Installation PC Camera Control Software LBB 4162/xx

94. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 94 DCNNG IO SA CC 22.Mar.06 Step 1  Connecting system hardware BOSCH Temporary Installation PC Temporary Installation PC

95. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 95 DCNNG IO SA CC 22.Mar.06 DCN-CCU Step 2  Connect DCN-CCU & Allegiant Switcher to Temporary PC RS232 Baudrate 19.2K Port 2 Camera Control Protocol I & U Instructions Baudrate 19.2K Allegiant Switcher Allegiant Switcher

96. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 96 DCNNG IO SA CC 22.Mar.06 Step 3  CCU protocol and Serial Port settings DCN-CCU Make sure that the ports of the CCU are set correct. Port 1 Protocol = Full Baudrate= 115.2K Port 2 Protocol = Camera Control Baudrate= 19.2K S500 Dip switches I & U Instructions

97. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 97 DCNNG IO SA CC 22.Mar.06 Step 4  Make sure you connect the RS232 cable to Port 2 of the DCN-CCU.

98. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 98 DCNNG IO SA CC 22.Mar.06 Step 5  Install DCNNG Stand Alone Camera Control software LBB4162

99. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 99 DCNNG IO SA CC 22.Mar.06 Step 6  Installing DCNNG Stand Alone Camera Control software LBB4162

100. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 100 DCNNG IO SA CC 22.Mar.06 Step 7  Installing DCNNG Stand Alone Camera Control software LBB4162

101. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 101 DCNNG IO SA CC 22.Mar.06 Step 8  Installing DCNNG Stand Alone Camera Control software LBB4162

102. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 102 DCNNG IO SA CC 22.Mar.06 Step 9  Select the language for operator

103. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 103 DCNNG IO SA CC 22.Mar.06 Step 10  Select use Allegiant VideoSwitcher

104. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 104 DCNNG IO SA CC 22.Mar.06 Step 11  Installing DCNNG Stand Alone Camera Control software LBB4162

105. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 105 DCNNG IO SA CC 22.Mar.06 Step 12  Finish installation

106. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 106 DCNNG IO SA CC 22.Mar.06 Step 13  Set Pre-Positions using the Video Switcher Keyboard

107. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 107 DCNNG IO SA CC 22.Mar.06 Step 14  Start DCN Next Generation Camera Install

108. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 108 DCNNG IO SA CC 22.Mar.06 Step 15  Combine seat numbers with camera pre positions LBB4162

109. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 109 DCNNG IO SA CC 22.Mar.06 Step 16  Make sure you choose the right camera!! Camera nr = Camera Address LBB4162

110. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 110 DCNNG IO SA CC 22.Mar.06 Step 17  Insert LBB4162

111. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 111 DCNNG IO SA CC 22.Mar.06 Step 18  Stop Camera Installation 5 LBB4162

112. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 112 DCNNG IO SA CC 22.Mar.06 Step 19  Connecting hardware (Remove temporary PC!) BOSCH See next slide Temporary Installation PC Temporary Installation PC

113. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 113 DCNNG IO SA CC 22.Mar.06 Step 20  Connection cable between CCU and Allegiant Switcher I & U Instructions

114. ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 114 DCNNG IO SA CC 22.Mar.06 End of how to configure: DCN-CCU with Allegiant Video Switcher DCNNG CC