AGRIMAR (UK) PLC AGRIMAR (UK) PLC CANAL COURT, 152 HIGH STREET BRENTFORD, MIDDLESEX TW8 8JA UNITED KINGDOM TEL: (0) FAX: (0) WEB SITE: TRACE ELEMENT RANGE

PRODUCT RANGE PRODUCTSPECIFICATIONUSES AGRI-FERIron ChelateFor soil application Fe EDDHA 6% DETA-FERIron ChelateFor foliar application Fe EDTA 13.2% MANGANESEManganese ChelateFor soil and foliar application Mn EDTA 13% ZINCZinc ChelateFor soil and foliar application Zn EDTA 14% COPPERCopper ChelateFor soil and foliar application Cu EDTA 14% AGRI-MIX No. 1High Iron MicronutrientFor foliar application Mix for general deficiencies AGRI-MIX No. 2Micronutrient Mix forFor foliar application general deficiencies NITRO-BOOSTHigh Nitrogen Mix forFor foliar application actively growing plants AGRI-FOL NPK and Micro-For foliar feeding nutrients, all purpose feed AGRIMAR (UK) PLC

AGRI-FER 6% Iron Chelate (Fe EDDHA) in micro-granular form. Contains 6% Fe. For the correction of iron deficiency in crops and ornamentals growing in alkaline and calcareous soils. Recommended for soil application. DIRECTIONS FOR USE Dissolve in a convenient amount of water, then apply as a coarse low pressure spray or sprinkle on as a dry powder, either by itself or mixed with an extender such as dry sand. Applications should always be incorporated into the top few centimetres of soil as soon as possible after application and certainly within the following 1-2 hours. This can be done by harrowing or hoeing in or by irrigation. Farm Crops: Apply to the soil before cultivation prior to sowing or planting or between the rows, alternatively apply through overhead or ground level irrigation systems. Deep-Rooting Trees & Shrubs: Apply to the soil in a wide circular bank under the limit of the full branch spread. For best results, nutrients should be in the root zone before seasonal growth begins. For deep rooting trees in regions which have moderate to high rainfall, apply in mid to late winter to allow the rains to wash in the chelate. Alternatively, use a pressure injector to get the solution down to the root feeding zone. Injections should be no more than one metre apart, in a wide band directly under the limit of the full branch spread. This should be done at the beginning of the season, just before re-growth commences. If there are weeds or grass growing under the trees, increase the recommended application rate by half as much again. Shallow Rooting Crops: Apply to the soil along the rows, beginning at the first signs of seasonal re- growth. In moderate to high rainfall areas, do not wash in. In arid regions, wash in sparingly. If the soil is densely-compacted, the surface should be broken up by hoeing or harrowing before applying. AGRIMAR (UK) PLC 1

AGRI-FER 6% RATES OF APPLICATION The following rates indicate upper and lower limits. Actual amounts used will depend upon the size of the bush or tree and on the degree of deficiency: Apples, Apricots, Peaches, Pears, Plums: Apply g per tree, depending on size. Citrus: For young trees, apply at g per 100m 2. For mature trees, apply at g per tree. As an annual maintenance programme, apply at g per tree. Grapes: Apply g per vine or g per 100 metres of row, in a band or a side dressing. Cotton, Peas and Beans, Cereals, Vegetables, Peppers, Root Crops, Potatoes, Tomatoes, Melons and Squashes: Apply kg/ha just before sowing or planting or when iron deficiency symptoms begin to appear. Raspberries, Strawberries, etc: Apply g per 100 metres of row, in a band or a side dressing. Rhododendrons, Azaleas, Roses, Forsythias and Other Shrubs: Apply g per plant. Chrysanthemums, Geraniums and Similar Annuals and Perennials: Apply g per 10m 2. Rates should be judged according to the age of the plant, variety, soil type and other local conditions. IRRIGATION When used through an irrigation system the appropriate application rate should be selected from the previous selection. This should then be applied via the irrigation system at a rate not greater than 1 kg (dry weight) per 10,000 Litres of water. PRECAUTIONS 1.Keep well sealed and store in original sealed container. 2.Wash hands before meals and after work. 3.Store away from children, pets, livestock and food stuffs. 4.Store dry, away from strong light. 5.Do not apply to crops suffering stress such as extreme temperatures, strong winds, etc. AGRIMAR (UK) PLC 2

AGRI-FER 6% TECHNICAL DATA IRON CHELATE (Fe EDDHA) IN MICRO-GRANULAR FORM. CONTAINS 6% Fe Trade Name: AGRI-FER Active Ingredient Fe min 6% Chemical Name of Active Ingredient: Ferric ethylenediamine bis – (2 hydroxyphenyle acetate) Chelate Agents: EDDHA Physical Form: Soluble powder, red/brown in colour. Packing: 1 kg laminated bags; 10 x 1 kgs per carton box. 20 kg boxes. Storage: Store in a cool dry place in original closed container. HEALTH HAZARDS a)Effect on eyes – product could cause slight discomfort if allowed to come into contact with delicate eye surfaces, but no permanent damage is likely. It is always advisable to wash eyes if contact with chemicals is suspected. b)Ingestion – the normally toxic metal ions are held in a complex form (chelated) which reduces their toxicity to a very low level. Risk of injury by accidental ingestion is minimal. In the event of accidental ingestion, the product is not accumulated and is readily eliminated from the body. c)Effect on skin and mucous membranes – no evidence of irritation or sensitisation. d)Inhalation – solid products can be dusty and a dust mask should be worn when handling them in bulk, since all dusts are to some extent irritant if inhaled. FIRST AID If accidentally ingested – rest patient, give copious amounts of water to drink and seek medical advice. Skin contamination – wash off with copious amounts of water. AGRIMAR (UK) PLC 3

DETA-FER Iron Chelate (Fe EDTA) in soluble powder form. Contains 13.2% Fe. For the correction of iron deficiency in crops. Recommended for soil application. DIRECTIONS FOR USE FOLIAR APPLICATIONHydroponics: Preparation of Solution: Stir 1 part powder into 6 parts water, dilute to the required concentration. Timing – to obtain maximum benefit, foliar applications should be started as early as possible in the season, as soon as there is sufficient leaf area to absorb the spray. Wetting Agent – when this product is applied as a foliar spray alone (i.e. not mixed with other pesticides) it is recommended that a non- ionic wetting agent such as AGRIWET is added to the spray solution. RATES OF APPLICATION The following rates indicate upper and lower limits. Actual amounts will depend upon the size of plant and on the degree of deficiency. Field Crops: General recommendation: Apply 1-2 kgs/ha in Litres of water/ha. For severe deficiencies repeat after two weeks. Fruit Crops: Apply 1-2kg/ha in a repeat high volume spray programme, e.g. 4 applications of 0.5 kgs in 1000 Litres water/ha. DO NOT EXCEED A SOLUTION OF 0-1% (1gram per Litre). Glasshouse Crops (Foliar Application): Tomato, Cucumber, Squash etc., Cut Flowers, Carnations, Pot Plants, Potted Flowers: Apply at a rate of 50g/1000 Litres water. Glasshouse Crops (Compost Application): If iron deficiency in plants growing in growbags or soil- less composts, Deta-Fer may be added to the irrigation water or liquid feed at a rate of 100 g per 1000 Litres water. If iron deficiency develops first check the pH of the nutrient solution and if necessary adjust to pH 6.0. Then add Deta-Fer at the rate of 80g per 1000 Litres of nutrient solution. If symptoms persist, repeat the treatment days later. A solution of 10 ppm can be made by adding 75g of Deta-Fer to 1000 Litres of nutrient solution. PRECAUTIONS 1.Keep well sealed and store in original sealed container. 2.Wash hands before meals and after work. 3.Store away from children, pets, livestock and food stuffs. 4.Store dry, away from strong light. 5.Do not apply to crops suffering stress, such as extreme temperatures, strong winds, etc. AGRIMAR (UK) PLC 4

AGRIMAR MANGANESE 13% Manganese Chelate (EDTA) in soluble granule form. Contains 13% Mn. For the correction of manganese deficiency in all crops. Recommended for soil and foliar application. DIRECTIONS FOR USE Preparation of Solution: Stir 1 part granules into 6 parts water, dilute to the required concentration. FOLIAR APPLICATION Timing – to obtain maximum benefit, foliar applications should be started as early as possible in the season, as soon as there is sufficient leaf area to absorb the spray. Wetting Agent – when this product is applied as a foliar spray alone (i.e. not mixed with other pesticides) it is recommended that a non- ionic wetting agent such as AGRIWET is added to the spray solution. SOIL APPLICATION Apply as a course low pressure spray direct to the soil. Application should always be incorporated into the top few centimetres of soil as soon as possible after application and certainly within the following 1-2 hours. This can be done by harrowing or hoeing in, or by irrigation. Farm Crops: Apply to the soil before the cultivation prior to sowing or planting or between the rows or through overhead or ground level irrigation systems. Deep-Rooting Trees and Shrubs: Apply to the soil in a wide circular band under the limit of the full branch spread. For best results, nutrients should be in the root zone before seasonal growth begins. For deep rooting trees in regions which have moderate to high rainfall, apply in mid to late winter to allow the rains to wash in the chelate. Alternatively, use a pressure injector to get the solution down to the root feeding zone. Injections should be no more than one metre apart, in a wide band directly under the limit of the full branch spread. This should be done at the beginning of the season just before re-growth commences. If there are weeds or grass growing under the trees, increase the recommended application rate by half as much again. Shallow-Rooting Crops: Apply to the soil along the rows, beginning at the first signs of seasonal re- growth. In moderate to high rainfall areas, do not wash in. In arid regions, wash in sparingly. If the soil is densely-compacted, the surface should be broken up by hoeing or harrowing before applying. AGRIMAR (UK) PLC 5

AGRIMAR MANGANESE 13% RATES OF APPLICATION The following rates indicate upper and lower limits. Actual amounts used will depend upon the type of plant and on the degree of deficiency: FOLIAR APPLICATION Field Crops and Greenhouses, General Recommendation: Apply 1-2 kgs/ha in Litres water/ha. For severe deficiencies repeat after two weeks. Fruit Crops: Apply the above quantities in a repeat high volume spray programme. DO NOT EXCEED A SOLUTION OF 0-1% (1 gram per Litre) WHEN APPLYING AS A FOLIAR SPRAY TO FRUIT CROPS. SOIL APPLICATION All Crops: 3-4 kgs/ha in Litres of water/ha. Rates should be judged according to the age of the plant, variety, soil type and other local conditions. IRRIGATION When used through an irrigation system the appropriate application rate should be selected from the previous selection. This should then be applied via the irrigation system at a rate not greater than 1 kg (dry weight) per 10,000 Litres of water. PRECAUTIONS 1.Keep well sealed and store in original sealed container. 2.Wash hands before meals and after work. 3.Store away from children, pets, livestock and food stuffs. 4.Store dry, away from strong light. 5.Do not apply to crops suffering stress such as extreme temperatures, strong winds, etc. AGRIMAR (UK) PLC 6

AGRIMAR MANGANESE 13% TECHNICAL DATA MANGANESE CHELATE (EDTA) IN SOLUBLE GRANULE FORM. CONTAINS 13% Mn. Trade Name: AGRIMAR MANGANESE 13% Active Ingredient Mn EDTA 13% Chemical Name of Active Ingredient: Disodium Manganous ethylenediamine tetra acetate Molecular Weight: 389 Physical Form: Soluble granules, white in colour. Solubility in Water: 300g/l (at 20ºC) Density: Moisture: Not greater than 5% Packing: 1 kg laminated bags; 10 x 1 kgs per carton box. 25 kgs carton boxes. Storage: Store in a cool dry place in original closed container. HEALTH HAZARDS a)Effect on eyes – product could cause slight discomfort if allowed to come into contact with delicate eye surfaces, but no permanent damage is likely. It is always advisable to wash eyes if contact with chemicals is suspected. b)Ingestion – the normally toxic metal ions are held in a complex form (chelated) which reduces their toxicity to a very low level. Risk of injury by accidental ingestion is minimal. In the event of accidental ingestion, the product is not accumulated and is readily eliminated from the body. c)Effect on skin and mucous membranes – no evidence of irritation or sensitisation. d)Inhalation – solid products can be dusty and a dust mask should be worn when handling them in bulk, since all dusts are to some extent irritant if inhaled. FIRST AID If accidentally ingested – rest patient, give copious amounts of water to drink and seek medical advice. Skin contamination – wash off with copious amounts of water. AGRIMAR (UK) PLC 7

AGRIMAR ZINC 14% Zinc Chelate (EDTA) in soluble granule form. Contains 14% Zn. For the correction of zinc deficiency in all crops. Recommended for soil and foliar application. DIRECTIONS FOR USE Preparation of Solution: Stir 1 part granules into 6 parts water, dilute to the required concentration. FOLIAR APPLICATION Timing – to obtain maximum benefit, foliar applications should be started as early as possible in the season, as soon as there is sufficient leaf area to absorb the spray. Wetting Agent – when this product is applied as a foliar spray alone (i.e. not mixed with other pesticides) it is recommended that a non- ionic wetting agent such as AGRIWET is added to the spray solution. SOIL APPLICATION Apply as a course low pressure spray direct to the soil. Application should always be incorporated into the top few centimetres of soil as soon as possible after application and certainly within the following 1-2 hours. This can be done by harrowing or hoeing in or by irrigation. Farm Crops: Apply to the soil before the cultivation prior to sowing or planting, or between the rows or through overhead or ground level irrigation systems. Deep-Rooting Trees and Shrubs: Apply to the soil in a wide circular band under the limit of the full branch spread. For best results, nutrients should be in the root zone before seasonal growth begins. For deep rooting trees in regions which have moderate to high rainfall, apply in mid to late winter to allow the rains to wash in the chelate. Alternatively, use a pressure injector to get the solution down to the root feeding zone. Injections should be no more than one metre apart, in a wide band directly under the limit of the full branch spread. This should be done at the beginning of the season just before re-growth commences. If there are weeds or grass growing under the trees, increase the recommended application rate by half as much again. Shallow-Rooting Crops: Apply to the soil along the rows, beginning at the first signs of seasonal re- growth. In moderate to high rainfall areas, do not wash in. In arid regions, wash in sparingly. If the soil is densely-compacted, the surface should be broken up by hoeing or harrowing before applying. AGRIMAR (UK) PLC 8

AGRIMAR ZINC 14% RATES OF APPLICATION The following rates indicate upper and lower limits. Actual amounts used will depend upon the type of plant and on the degree of deficiency: FOLIAR APPLICATION Field Crops and Greenhouses, General Recommendation: Apply 1-2 kgs/ha in Litres water/ha. For severe deficiencies repeat after two weeks. Vegetables and Nurseries: Apply kgs/ha in Litres water/ha. Citrus, Apples, Pears, Stone Fruits: Apply 1-2 kgs/ha in a repeat high volume spray programme, e.g. 4 applications of 0.5 kgs in 500 Litres water/ha. DO NOT EXCEED A SOLUTION OF 0-1% (1 gram per Litre). SOIL APPLICATION Field Crops, Vegetables, Nurseries:Apply 1-5 kg/ha. Citrus, Apples, Pears, Stone Fruits:Apply 5-10 kg/ha. Grape Vineyards:Apply 8-25 kg/ha. Ornamental Trees:Apply 7-30 g/tree. Shrubs and Bushes:Apply kg/100 bushes. Strawberries:Apply kg/100 plants. Rates should be judged according to the age of the plant, variety, soil type and other local conditions. IRRIGATION When used through an irrigation system the appropriate application rate should be selected from the previous selection. This should then be applied via the irrigation system at a rate not greater than 1 kg (dry weight) per 10,000 Litres of water. PRECAUTIONS 1.Keep well sealed and store in original sealed container. 2.Wash hands before meals and after work. 3.Store away from children, pets, livestock and food stuffs. 4.Store dry, away from strong light. 5.Do not apply to crops suffering stress such as extreme temperatures, strong winds, etc. AGRIMAR (UK) PLC 9

AGRIMAR ZINC 14% TECHNICAL DATA ZINC CHELATE (EDTA) IN SOLUBLE GRANULE FORM. CONTAINS 14% Zn. Trade Name: AGRIMAR ZINC 14% Active Ingredient Zn EDTA 14% Chemical Name of Active Ingredient: Zinc disodium ethylenediamine tetra acetate. Molecular Weight: 399 Physical Form: Soluble granules, white in colour. Solubility in Water: 300g/l (at 20ºC) Density: Moisture: Not greater than 5% Packing: 1 kg laminated bags; 10 x 1 kgs per carton box. 25 kgs carton boxes. Storage: Store in a cool dry place in original closed container. HEALTH HAZARDS a)Effect on eyes – product could cause slight discomfort if allowed to come into contact with delicate eye surfaces, but no permanent damage is likely. It is always advisable to wash eyes if contact with chemicals is suspected. b)Ingestion – the normally toxic metal ions are held in a complex form (chelated) which reduces their toxicity to a very low level. Risk of injury by accidental ingestion is minimal. In the event of accidental ingestion, the product is not accumulated and is readily eliminated from the body. c)Effect on skin and mucous membranes – no evidence of irritation or sensitisation. d)Inhalation – solid products can be dusty and a dust mask should be worn when handling them in bulk, since all dusts are to some extent irritant if inhaled. FIRST AID If accidentally ingested – rest patient, give copious amounts of water to drink and seek medical advice. Skin contamination – wash off with copious amounts of water. AGRIMAR (UK) PLC 10

AGRIMAR COPPER 14% Copper Chelate (EDTA) in soluble powder form. Contains 14% Cu. For the correction of copper deficiency in all crops. Recommended for soil and foliar application. DIRECTIONS FOR USE Preparation of Solution: Stir 1 part granules into 6 parts water, dilute to the required concentration. FOLIAR APPLICATION Timing – to obtain maximum benefit, foliar applications should be started as early as possible in the season, as soon as there is sufficient leaf area to absorb the spray. Wetting Agent – when this product is applied as a foliar spray alone (i.e. not mixed with other pesticides) it is recommended that a non- ionic wetting agent such as AGRIWET is added to the spray solution. SOIL APPLICATION Apply as a course low pressure spray direct to the soil. Application should always be incorporated into the top few centimetres of soil as soon as possible after application and certainly within the following 1-2 hours. This can be done by harrowing or hoeing in or by irrigation. Farm Crops: Apply to the soil before the cultivation prior to sowing or planting, or between the rows or through overhead or ground level irrigation systems. Deep-Rooting Trees and Shrubs: Apply to the soil in a wide circular band under the limit of the full branch spread. For best results, nutrients should be in the root zone before seasonal growth begins. For deep rooting trees in regions which have moderate to high rainfall, apply in mid to late winter to allow the rains to wash in the chelate. Alternatively, use a pressure injector to get the solution down to the root feeding zone. Injections should be no more than one metre apart, in a wide band directly under the limit of the full branch spread. This should be done at the beginning of the season just before re-growth commences. If there are weeds or grass growing under the trees, increase the recommended application rate by half as much again. Shallow-Rooting Crops: Apply to the soil along the rows, beginning at the first signs of seasonal re- growth. In moderate to high rainfall areas, do not wash in. In arid regions, wash in sparingly. If the soil is densely-compacted, the surface should be broken up by hoeing or harrowing before applying. AGRIMAR (UK) PLC 11

AGRIMAR COPPER 14% RATES OF APPLICATION The following rates indicate upper and lower limits. Actual amounts used will depend upon the type of plant and on the degree of deficiency: FOLIAR APPLICATION Field Crops, General Recommendation: Apply kgs/ha in Litres water/ha. For severe deficiencies repeat after two weeks. Vegetables and Nurseries: Apply kgs/ha in Litres water/ha. Cereals: Apply kgs/ha in Litres water/ha. Fruit Trees: Apply kgs/ha in a repeat high volume spray programme, e.g. 4 applications of 125 gm/ha in Litres water/ha. DO NOT EXCEED A SOLUTION OF 0-1% (1 gram per Litre) WHEN APPLYING AS A FOLIAR SPRAY TO FRUIT CROPS. SOIL APPLICATION Field Crops, Vegetables, Nurseries:Apply kg/ha. Fruit Trees:Apply kg/ha. Ornamental Trees:Apply 7-30 g/tree. Shrubs and Bushes:Apply kg/100 bushes. Strawberries:Apply kg/100 plants. Rates should be judged according to the age of the plant, variety, soil type and other local conditions. IRRIGATION When used through an irrigation system the appropriate application rate should be selected from the previous selection. This should then be applied via the irrigation system at a rate not greater than 1 kg (dry weight) per 10,000 Litres of water. PRECAUTIONS 1.Keep well sealed and store in original sealed container. 2.Wash hands before meals and after work. 3.Store away from children, pets, livestock and food stuffs. 4.Store dry, away from strong light. 5.Do not apply to crops suffering stress such as extreme temperatures, strong winds, etc. AGRIMAR (UK) PLC 12

AGRIMAR COPPER 14% TECHNICAL DATA COPPER CHELATE (EDTA) IN SOLUBLE POWDER FORM. CONTAINS 14% Cu. Trade Name: AGRIMAR COPPER 14% Active Ingredient Cu EDTA 14% Chemical Name of Active Ingredient: Copper disodium ethylenediamine tetra acetate. Molecular Weight: 397 Physical Form: Soluble granules, blue in colour. Solubility in Water: 357g/l (at 20ºC) Density: 0.70 Moisture: Not greater than 5% Packing: 1 kg laminated bags; 10 x 1 kgs per carton box. 25 kgs carton boxes. Storage: Store in a cool dry place in original closed container. HEALTH HAZARDS a)Effect on eyes – product could cause slight discomfort if allowed to come into contact with delicate eye surfaces, but no permanent damage is likely. It is always advisable to wash eyes if contact with chemicals is suspected. b)Ingestion – the normally toxic metal ions are held in a complex form (chelated) which reduces their toxicity to a very low level. Risk of injury by accidental ingestion is minimal. In the event of accidental ingestion, the product is not accumulated and is readily eliminated from the body. c)Effect on skin and mucous membranes – no evidence of irritation or sensitisation. d)Inhalation – solid products can be dusty and a dust mask should be worn when handling them in bulk, since all dusts are to some extent irritant if inhaled. FIRST AID If accidentally ingested – rest patient, give copious amounts of water to drink and seek medical advice. Skin contamination – wash off with copious amounts of water. AGRIMAR (UK) PLC 13

AGRI-MIX NO. 1 A micronutrient mix for correction of nutrient deficiencies in all plants. Formulated as soluble powder. Recommended for foliar application and soil application in acid to neutral soils. DIRECTIONS FOR USE FOLIAR APPLICATION Foliar application is recommended for fast correction of deficiencies. Phytotoxic symptoms, such as scorching, may occasionally occur on very sensitive crops after foliar application. If this occurs change to root application. Timing – to obtain maximum benefit, foliar applications should be started as early as possible in the season, as soon as there is sufficient leaf area to absorb the spray. In case of severe deficiencies, application may have to be repeated at 7-14 day intervals. Wetting Agent – when this product is applied as a foliar spray alone (i.e. not mixed with other pesticides) it is recommended that a non- ionic wetting agent such as AGRIWET is added to the spray solution. SOIL APPLICATION Dissolve in a convenient amount of water, then apply as a coarse low pressure spray or apply mixed with liquid fertiliser. Apply to the soil close to plants and tree trunks. Work well into the soil after application, water carefully after each application to enhance nutrient uptake. COMPATIBILITY: The product can be mixed with most other fertilizers and agrochemicals without causing precipitation or scorch problems. In liquid fertilizers the mixture should be used as soon as possible. AGRIMAR (UK) PLC 14

AGRI-MIX NO. 1 COMPOSITION Element ContentContentForm Boron B0.40% 4.0 g/kgMineral Salt Copper Cu0.15% 1.5 g/kgEDTA Iron Fe5.00%50.0 g/kgEDTA Manganese Mn2.00%20.0 g/kgEDTA Molybdenum Mo0.10% 1.0 g/kgMineral Salt Zinc Zn0.20% 2.0 g/kgEDTA AGRI-MIX No. 1 is a micronutrient mix with a higher than usual level of Iron (Fe) which has been designed specifically for use under Middle Eastern conditions. RATES OF APPLICATION The following rates give general recommendations. Actual amounts used will depend on the size of bush or tree and on the degree of deficiency. CropFoliar ApplicationSoil Application Cereals 1-2 kg/ha 4-10 kg/ha *Fruit Trees and Shrubs 2-5 kg/ha 4-10 kg/ha Vegetables 1-4 kg/ha 4-8 kg/ha Ornamentals 1-4 kg/ha 2-10 g/plant *When applying as foliar spray to fruit trees it is important to use a repeat high volume spray programme, e.g. 4 applications of 0.5 kgs in Litres water/ha. DO NOT EXCEED A SOLUTION OF 0-1% (1 gram per Litre) Rates should be judged according to the age of the plant, variety, soil type and other local conditions. PRECAUTIONS 1.Keep well sealed and store in original sealed container. 2.Wash hands before meals and after work. 3.Store away from children, pets, livestock and food stuffs. 4.Store dry, away from strong light. 5.Do not apply to crops suffering stress such as extreme temperatures, strong winds, etc. AGRIMAR (UK) PLC 15

AGRI-MIX NO. 2 A micronutrient mix for correction of nutrient deficiencies in all plants. Formulated as soluble powder. Recommended for foliar application and soil application in acid to neutral soils. DIRECTIONS FOR USE FOLIAR APPLICATION Foliar application is recommended for fast correction of deficiencies. Phytotoxic symptoms, such as scorching, may occasionally occur on very sensitive crops after foliar application. If this occurs change to root application. Timing – to obtain maximum benefit, foliar applications should be started as early as possible in the season, as soon as there is sufficient leaf area to absorb the spray. In case of severe deficiencies, application may have to be repeated at 7-14 day intervals. Wetting Agent – when this product is applied as a foliar spray alone (i.e. not mixed with other pesticides) it is recommended that a non- ionic wetting agent such as AGRIWET is added to the spray solution. SOIL APPLICATION Dissolve in a convenient amount of water, then apply as a coarse low pressure spray or apply mixed with liquid fertiliser. Apply to the soil close to plants and tree trunks. Work well into the soil after application, water carefully after each application to enhance nutrient uptake. COMPATIBILITY: The product can be mixed with most other fertilizers and agrochemicals without causing precipitation or scorch problems. In liquid fertilizers the mixture should be used as soon as possible. AGRIMAR (UK) PLC 16

AGRI-MIX NO. 2 COMPOSITION Element ContentContentForm Boron B1.5%15.0 g/kgMineral Salt Iron Fe3.8%38.0 g/kgEDTA Magnesium Mg1.6%16.0 g/kgMineral Salt Manganese Mn4.3%43.0 g/kgMineral Salt Molybdenum Mo0.3% 3.0 g/kgMineral Salt Zinc Zn0.2% 2.0 g/kgEDTA AGRI-MIX No. 2 is a micronutrient mix suitable for routine applications to maintain the nutrient status and health of all crops throughout the growing season. Contains Iron EDTA chelate. RATES OF APPLICATION The following rates give general recommendations. Actual amounts used will depend on the size of bush or tree and on the degree of deficiency. CropFoliar ApplicationSoil Application Cereals 1-2 kg/ha 4-10 kg/ha *Fruit Trees and Shrubs 2-5 kg/ha 4-10 kg/ha Vegetables 1-4 kg/ha 4-8 kg/ha Ornamentals 1-4 kg/ha 2-10 g/plant *When applying as foliar spray to fruit trees it is important to use a repeat high volume spray programme, e.g. 4 applications of 0.5 kgs in Litres water/ha. DO NOT EXCEED A SOLUTION OF 0-1% (1 gram per Litre) Rates should be judged according to the age of the plant, variety, soil type and other local conditions. PRECAUTIONS 1.Keep well sealed and store in original sealed container. 2.Wash hands before meals and after work. 3.Store away from children, pets, livestock and food stuffs. 4.Store dry, away from strong light. 5.Do not apply to crops suffering stress such as extreme temperatures, strong winds, etc. AGRIMAR (UK) PLC 17

NITRO-BOOST NITRO-BOOST is a liquid formulation designed to give additional nitrogen to crops in a fast acting foliar form. When used during periods of rapid growth or as a routine treatment NITRO- BOOST helps maintain the crop on the path of optimum yield. Recommended for foliar application. DIRECTIONS FOR USE Conventional Spraying: Apply in a minimum of 220 Litres water/ha. CAD/ULV Spraying: Volume of water can be reduced to 55 Litres/ha. COMPATIBILITY NITRO-BOOST is compatible with a wide range of fungicides and insecticides. NITRO- BOOST should be added to the water first, followed by the pesticide. RATES OF APPLICATION CropRate per No. of Stage of Crop HectareApplic. Cereals5-10 Ltr 3-6From beginning of tillering up to flowering. Vegetables, Melons, Squashes, 5-10 Ltr 1-3 As soon as sufficient foliage is Tomatoes,Cucumbers, etc. available for absorption. Sugar Beet 3-9 Ltr 3-6From 5-6 leaves onwards. Maize5-10 Ltr 1-3From 20cm height up to maximum 4 weeks later. Peas 2-3 Ltr 2-4After peas are more than 15cm high. Fruit and Ornamentals 6 Ltr 1-3Before flowering. (under glass and outdoors) The lower rate is recommended in the case of multiple applications to any one crop. AGRIMAR (UK) PLC 18

NITRO-BOOST COMPOSITION Nitrogen N36% w/v Magnesium Mg 2.4 % w/v Manganese Mn 1.3% w/v Copper Cu 0.13% w/v NITRO-BOOST may be applied through any type of sprayer or through the irrigation system in intensive crops. For optimum effectiveness all the spray mixture should be applied to the plant foliage. NITRO-BOOST is independent of weather conditions, but best results will be obtained if applied early morning or late evening. Do not apply in bright sunlight. PRECAUTIONS 1.Keep well sealed and store in original sealed container. 2.Wash hands before meals and after work. 3.Store away from children, pets, livestock and food stuffs. 4.Store dry, away from strong light. 5.Do not apply to crops suffering stress such as extreme temperatures, strong winds, etc. Packed in 5 litre plastic bottles; 4 x 5 Litres per carton. AGRIMAR (UK) PLC 19

AGRI-FOL Liquid Foliar Fertiliser. Guaranteed analysis A complete foliar nutrient for application to all crops. Recommended for foliar and soil application. DIRECTIONS FOR USE AGRI-FOL mixes readily with water. Stir when mixing. Spray when crop is actively growing. During hot weather spray at coolest part of the day, i.e. early morning or late evening. DO NOT APPLY IN DIRECT SUNLIGHT. COMPATIBILITY AGRI-FOL is compatible with a wide range of fungicides and insecticides. AGRI-FOL should be added to the water first, followed by the pesticide. RATES OF APPLICATION FOLIAR APPLICATION – All Crops: Apply 2.5 Litres/ha in minimum 225 Litres water/ha. Begin when leaves are large enough to absorb the nutrients and continue every days until crop is mature. SOIL APPLICATION – All Crops: Apply 50 Litres/ha in 1120 Litres water/ha before planting. Work lightly into the soil. ROW APPLICATION – All Crops: Apply 5 Litres/ha in 1120 Litres water/ha at least 5cm to the side and 5cm below the row of seeds. AGRIMAR (UK) PLC 20

AGRI-FOL COMPOSITION Water Soluble Organic Nitrogen (urea)N12% Available Phosphoric AcidP 6% Water Soluble PotashK 6% MagnesiumMg0.10% IronFe0.10% ManganeseMn0.05% CopperCu0.05% ZincZn0.05% BoronB0.02% MolybdenumMo0.0005% CobaltCo0.0005% CAUTION AGRI-FOL is acidic. Avoid contact with skin, eyes or clothing. Rinse out equipment after spraying. PRECAUTIONS 1.Keep well sealed and store in original sealed container. 2.Wash hands before meals and after work. 3.Store away from children, pets, livestock and food stuffs. 4.Store dry, away from strong light. 5.Do not apply to crops suffering stress such as extreme temperatures, strong winds, etc. AGRIMAR (UK) PLC 21