3. T6M4 PLANT FUEL Designed to match any crops need Low Salt index
Nutrients are in plant available forms
Compatible with popular pesticides
Easy to pump and handle
Non- corrosive to equipment
Easy and effectively applied

4. Benefits to T6M4 Provide nutrients during peak periods of demand
Supplying plants with certain nutrients, such as zinc and iron, that may not be readily available for root uptake especially in high soil pH.
Allowing flexibility in suppling nutrients related to improving the quality of the harvest.
Controlling nutrient losses in conditions with high potential loss.
Providing a nutrient source during periods of stress when soil applications are not practical.
Giving a nutritional boost to plants at the same time that other foliar chemicals are being applied, thereby minimizing application expenses.
Improve Nitrogen Use Efficiency.

5. How to use
Spray with herbicide and fungicide to avoid extra application costs
Spray at 1 to 1.5 litres per acre as this is about the limit to what can be efficiently absorbed by the plant on a single foliar application
Many environmental factor can impact the effectiveness of foliar nutrient application. Generally, application during early morning or evening is most effective.
Air temp less than 27degree C and high humidity favour nutrient absorption thru the leaf
Low wind speed
Droplet size smaller the better but 100 microns is to small as drift can be a problem

7. Foliar Feeding Facts
Tests have shown that foliar feeding can be 8 to 10 times more effective than soil feeding.
Up to 90% of a foliar –fed solution can be found in the roots of a plant within 1 hour of application.
An effective way to compensate for soil deficiencies and poor soil’s inability to transfer nutrients to the plant.
Leaves are very efficient at absorbing nutrients and utilizing this can enhance yield over roots alone.

8. Hidden Hunger
The yield loss in a crop from nutrient deficiency without showing physical symptoms
Estimates that over 30% of crops affected
Ever increasing problem as high levels of fertilizer increase yields greater demand for all nutrients
Top producers at the highest risk
Large yields require more nutrients, each year more nutrients are pulled out off the soil.
Fertilizer is very expensive and crops yield to the level of the most limiting nutrient.

9. Leibig’s Barrel

10. Cost Saving Strategies
Apply with herbicide and fungicide so no additional application cost
Weeds boosted by the fertilizer will uptake herbicide better
Reducing the amount of fertilizer applied at seed by the cost of the foliar would essentially mean no extra cost.
Improve Nitrogen Use Efficiency.
The closer you are to harvest the fewer risks to your crop.