Flexible machining cell FPZ - 250

FPZ- 250 Motor cooling unit Machine Electric cabinet Conveyor belt Hydraulics Pneumatics Lubrication Control panel

Description / FPZ-250 FPZ- 250 Machine basement  designed and produced in accordance with EC standards  stable construction  installed as independent unit  easily accessible  simple for servicing FPZ- 250

Description/ FPZ-250 FPZ- 250 X-axis Y-axis Z-axis  stroke 600 mm  v = 60 m/min  a = 6 m/s2  measuring laths 5μm Heidenhain Y-axis  stroke 1200 mm  v = 100 m/min FPZ- 250  a = 6 m/s2, Option 10 m/s2  measuring laths 5μm Heidenhain Z-axis  stroke 600 mm  v = 60 m/min  a = 6 m/s2  measuring laths 5μm Heidenhain  pneumat. cylinder f. mass balancing

Description / FPZ-250 FPZ- 250 B-axis  twisting angle 360°  180° twist in 0,5 sec.  v = 190 u/min  Md = 150 Nm  M max. 300 Nm  blocking moment 1500 Nm  splitting accurancy +/- 5” FPZ- 250

Description / FPZ-250 FPZ- 250 Working area 650 x 600 x 400 mm  ergonomic and easily accessible for tool exchange  machine fully protected by exhausting system  particles fall directly onto particles conveyor Workpieces  maximal dimension 250 x 300 x 400 mm  Al die-castings, die-castings, forgings, other materials FPZ- 250

Description/ FPZ-250 FPZ- 250 Working spindle Cooling  maximal 3 x 6- position tool exchanging unit  HSK 63  with cooling through spindle  maximal 12 000 RPM  maximal power 15 kW at 100% ED (22,5 kW at 33% ED) Cooling  MMS- with oil mist FPZ- 250  without emulsion  with emulsion up to 60 bar  with oil up to 60 bar

Description / FPZ-250 FPZ- 250 Jig clamping  HSK 100 with 4 brackets for orientation  with 6 hydraulic connections  2 pneumatic connections for workpiece line-surface inspection  2 pneumatic connections for workpiece clamping inspection  option for automated jig exchange FPZ- 250

Machine feeding FPZ- 250 Automatic by conveyor belt Automatic by robot  conveyor belt through machine  positioning of two or more pallets on conveyor belt Automatic by robot  feeding directly into jig  feeding into another jig Manual FPZ- 250 feeding into another jig

Secondary times FPZ- 250 Time between two machining operations  less than 1 sec Tooling exchange  at turret block < 2,5 sec.  at tool exchanger < 1 sec. Workpiece exchange  at pick-up system approx. 8 sec.  at pallet exchange approx. 6 sec. FPZ- 250

Advantages in comparison with machining centres Time between machining operations lower than 1 sec. No problems with particles at machining in dry conditions (jig hanging) Pick-up system of workpiece clamping  only one jig necessary  no need on separate feeding device and/or robot Easy to connect into system Machining from 5 sides possible Simultaneous 4-axis machining possible FPZ- 250

Advantages-general FPZ- 250 Spindle with workpiece jig vertical  pick-up system for rapid workpiece exchange Accurrancy independent on  workpiece weight  jig weight  overhang ( Z-axis ) Jig exchange FPZ- 250  connection by six hydraulic rings  connection by two pneumatic rings – line –surface inspection  clamping through pallet possible Simple accessibility to all tools Constructed compact as uniform whole  no need for disassembling during transport  short start-up time at site of installation

Modifizierte flexible Zelle FPZ 250 Modified cell FPZ - 250 Tool exchanging unit ( 20 / 30 tools ) Turret block (up to 6 tools or smaller multi-spindle head ) Multi-spindle heads (nunber of spindles according to requirements )