Board Replacement for Engineered Glue-Down Hardwood Floors
Board Replacement for Engineered Glue-Down Hardwood Floors Why Replace a Board? Damage to existing board Manufacturing defect Aesthetic changes
Board Replacement for Engineered Glue-Down Hardwood Floors Tools to be Used Adhesive, Circular saw, Trowel, Tapping block, Vacuum, Pencil, Marking pen, putty sticks, Measuring tape, Dust mask, Safety glasses, End nippers, Knife, Chisel, Scraper and Hammer.
Board Replacement for Engineered Glue-Down Hardwood Floors Layout the Areas to be Cut With a marking pen layout the areas to be cut approximately ½” from the side joints
Board Replacement for Engineered Glue-Down Hardwood Floors Drill Holes at the Corners to Prevent Damage to Adjoining Boards
Board Replacement for Engineered Glue-Down Hardwood Floors Cutting the Areas Marked Care must be taken not to cut into adjoining boards
Board Replacement for Engineered Glue-Down Hardwood Floors Setting the Saw to cut the thickness of the board
Board Replacement for Engineered Glue-Down Hardwood Floors Make a Cut Down the Center for Easy Removal
Board Replacement for Engineered Glue-Down Hardwood Floors Carefully Remove the End Pieces
Board Replacement for Engineered Glue-Down Hardwood Floors Release the Remaining ½” of the Edge Loose from the Adhesive
Board Replacement for Engineered Glue-Down Hardwood Floors Clean any Remaining the Adhesive to a Thin Residue
Board Replacement for Engineered Glue-Down Hardwood Floors Mark the Replacement Board to Length
Board Replacement for Engineered Glue-Down Hardwood Floors Cut the Board to Length
Board Replacement for Engineered Glue-Down Hardwood Floors Remove the Bottom of the Groove on the Side and End
Board Replacement for Engineered Glue-Down Hardwood Floors Apply the Adhesive to the Back of the Material with a Notched Spreader
Board Replacement for Engineered Glue-Down Hardwood Floors Optional: Place a Bead of Glue on the Top of the Tongue
Board Replacement for Engineered Glue-Down Hardwood Floors Insert the Tongue and Drop into Place
Board Replacement for Engineered Glue-Down Hardwood Floors Clean and Fill as Necessary
Board Replacement for Engineered Glue-Down Hardwood Floors Weight Overnight if Necessary