1. X-102 Glider

2. Tools and Materials 8 ½”x11” 20lb copier paper
8 ½”x11” 64lb card stock
8 ½”x11” cardboard
Foamie sheets
Rubber bands
Paperclips
Coffee stirrer sticks
Straws
Scotch tape
Masking tape
Scissors
Glue gun
Colored pencils
12” ruler

3. Score length of cardboard ¾” wide with scissors.
Fuselage
Score length of cardboard
¾” wide with scissors.
Mark another ¾” strip with a pencil.
Cut along the mark. Should be 1.5” wide by 11” long. 3

4. Bend the cardboard along the score line.
Fuselage
Bend the cardboard along the score line.
Wrap masking tape around the nose. Cut a notch on scored side, not the open side.
Cut along the mark. Should be 1.5” wide by 11” long. 4

5. From card stock paper, mark a 4” wide wing. Score ½” from the edge.
Bend the wing along the score line.
Cut a 1.25” strip for the tail. 5

6. From card stock paper, mark a 4” wide wing.
Tail
From card stock paper, mark a 4” wide wing.
Bend the tail strip in the middle. 6

7. Insert the tail piece in the fuselage cut. Bend the tail flaps out.
Wrap scotch tape around the fuselage and tail to secure it. 7

8. Tape or hot glue a coffee stirrer stick to keep the wing stiff.
Mount wings
Tape or hot glue a coffee stirrer stick to keep the wing stiff.
Cut and bend elevator flaps.
Tape or hot glue the front edge wing edge to stiffen the wing.
Tape wing to fuselage. 8

9. Decorate 9