F&J SPECIALTY PRODUCTS, INC. Ruggedized Cellular Phone Data Interface System For F&J Air Sampler Systems Rev.: 13 August 2018

Ruggedized Cellular Phone Data Interface System for Digital Flow Meter Air Sampler Systems Global Air Sampler Systems F&J P/N: CASRPS-DFM F&J P/N: CASRPS

Ruggedized Cellular Phone Data Interface System Phone Overview

Ruggedized Cellular Phone Data Interface System Phone Overview

Ruggedized Cellular Phone Data Interface System Phone Overview

Ruggedized Cellular Phone Data Interface System GENERAL DESCRIPTION:   The Casio G’ZOne based F&J air sampler Data Interface system is a ruggedized phone running a custom application including a Data Concentrator electronic module and a power supply. The phone is constantly charged through the USB connector. The F&J Data Interface system permits connection to an air sampler system whereby measurement data can be sent periodically via email and/or SMS. Additionally, air sampler status messages are sent when an unexpected event occurs, or an alarm is triggered or cleared. The setup feature in the F&J Data Application allows the configuration of the email server, up to three recipient email addresses and the selection of engineering units. The operator can also set up the phone to send SMS text messages to up to three recipients. Data can also be sent by email or text on an operator selectable frequency. The Casio G’ZOne cellular phone is mounted in an enclosure external to the main air sampler enclosure (May vary for some F&J air sampling models) while also has a locking hasp for a padlock to provide some measure of security.

Ruggedized Cellular Phone Data Interface System Ruggedized Cell Phone System Features: Network Operation: CDMA, GSM or Wi-Fi Email server settings SMTP Server SMPT Port Sender Email Address Sender Password SMS Text Settings Operator Selectable Engineering Units Flow: SCFM, SLPM, SCCM, sm3/hr, Sm3/m Temperature: °C, °F Pressure: Atm, InHg, mmHg, bar, kPa, mbar, or hPa Operator Selectable E mail Frequency: 10 seconds to 12 hours Operating Temperature: -30°C to 60°C (-22°F to 140°F) Operating Humidity: 95%; non-condensing Certification: MIL-STD-810G Main Screen

Ruggedized Cellular Phone Data Interface System Ruggedized Cellphone Averaging and Alarm Email Notification Examples : Averaging Notification Flow Alarm Notification

Data Concentrator Specifications Power supply: 9V DC, minimum 800Ma Power connector: Barrel connector jack, 2.0mm ID, 5.5mm OD, center positive Power protection: Reverse polarity protected Instrument connections: Up to 4 bidirectional RS-232 (RX, TX, GND) RS-232 connectors: 9 position D-Sub male (DB9M) Phone connection: USB 2.0 (host/OTG) USB capability: Data and charge USB connector: Micro USB Mating USB cable: Micro-A OTG (must use supplied red cable, regular USB cable will not work) Power indicator: Red LED Operation indicator: Yellow LED (phone is connected and application is running) Processor: 16 bit embedded flash microcontroller Operating temperature: -25°C to +65°C Panel size: 3.0" x 3.9" Main Screen 

Data Concentrator Specifications Main Screen 

Ruggedized Cellular Phone Data Interface System   The ruggedized cellular phone data interface system can be utilized with either low volume or high volume air sampler systems. Low Volume Air Sampler

Ruggedized Cellular Phone Data Interface System High Volume Air Sampler

Ruggedized Cellular Phone Data Interface System

Ruggedized Cellular Phone Data Interface System