Introducing the new generation MASTERColour CDM Elite lamps Save energy and improve quality of light! Introducing the new generation MASTERColour CDM Elite lamps MASTERColour CDM-T / TC Elite 50W/930 Preliminary technical datasheet

CDM-T /TC Elite 50W/930 – preliminary technical data Features excellent quality of light lowest total cost of ownership can replace standard 70W ceramic metal halide lamps and: reduce energy consumption while improving lumen level improve CRI from 80 to 90 increase life from 12.000 to 15.000hrs 50W system fits in existing 70W luminaires (a 50W lamp needs 50W gear) Benefits Replace standard 70W ceramic metal halide lamps and save 25W (=30%!) energy on system level, while improving quality of light and increasing lifetime. longer life combined with high lumen maintenance make this system unbeatable in total cost of ownership existing luminaires can be used for quick design-in and installation. Dimensions Target performance CDM-T / TC Elite 50W/930 T / TC lumen output 5.400 efficacy (lm/W) 108 CRI 90 maintenance @ 12.000 hr 80% survival 95% (hr) 9.000 survival 90% (hr) 10.000 survival 80% (hr) 11.000 survival 50% (hr) 15.000 service life 80% (hr) CDM-T G12 CDM-TC G8.5 Dimensions 50W lamp (mm) D max L (=LCL) Nom C Max CDM-T Elite G12 20 56 103 CDM-TC Elite G8.5 15 52 85 Dimensions same as existing T and TC lamps. Arc length O similar to existing CDM lamps. HID-PV 50W /S HID-PV 50W /I Performance data to be confirmed before introduction HID-PV C 50W Power Factor > 0,95 Gear losses < 6W Connectors 0.75 – 2.5 mm2 Lifetime 40.000 hrs / 90% survivors @ Tc Performance data to be confirmed before introduction Dimensions gear (mm) A1 A2 B1 B2 C1 D1 HID-PV C 50 /I CDM 188.0 170.0 83.0 - 34.5 4.8 HID-PV C 50 /S CDM 109.6 98.5 74.4 63.7 32.2 4.9 HID-PV C 50W /I CDM HID-PV C 50W /S CDM Tc 75C 80C Ta 50C 55C

CDM-T /TC Elite 50W/930 – preliminary technical data Frequently asked questions What is new or different in this new generation of Elite lamps? This 50W lamp is part of the new generation CDM Elite lamps and is based on breakthroughs in burner design, metal halide composition and burner processing. Burner shape is the only visible change compared to the existing Elite lamps, but the largest part of the breakthroughs happens inside the burner. When will the new lamps be available? The new 50W lamps and gears will be available from December 20, 2010 onwards. When will samples be available? Samples are available since 1st half of July 2010. Can this new Elite 50W lamp also run on Electromagnetic (EM) gear? At this moment we are testing this combination , but we do not yet have sufficient data to prove this. We will communicate updates once available. What is the benefit of relamping standard CDM 70W with the new Elite 50W? During the first 2.000hrs of life, the standard CDM lamp looses about 15% of its initial lightoutput. The excellent lumen maintenance of the new Elite 50W brings the lumen output of the new lamp within 2.000hrs very close (within 5%) to the lumen output of a standard CDM 70W. Later during life the Elite 50W provides even more lumen output than a CDM 70W! The energy consumption is however 30% less! On top of that, the Elite 50W has CRI 90 and 25% longer life. See next page for details. Will an Elite version 50W/942 also become available? We are committed to building further on the CDM Elite portfolio. We expect to announce further range extentions in 2011. Ordering data new generation lamps; lamps available per 20.12.2010 naming 12nc = GPC EOC MASTERColour CDM-T Elite 50W/930 G12 1CT 9281 917 05131 93060300 MASTERColour CDM-TC Elite 50W/930 G8.5 1CT 9281 918 05131 93062700 HID-PV C 50 /S CDM 220-240V 50/60Hz 9137 006 64966 93363500 HID-PV C 50 /P CDM 220-240V 50/60Hz 9137 006 65066 94338200 HID-PV C 50 /I CDM 220-240V 50/60Hz 9137 006 65166 93365900

CDM-T /TC Elite 50W/930 – preliminary logistic data Comparison standard CDM 70W/830 with CDM Elite 50W/930: Within 2000hrs, the Elite 50W provides 95% of the lumen of a CDM 70W. Elite 50W provides more light after 4.500 hrs than a CDM 70W on EM gear. Elite 50W provides more light after 8.000 hrs than a CDM 70W on EL gear. Elite 50W lives 3.000hrs longer Elite 50W = more light + higher CRI + longer life + less energy! Performance comparison CDM 70W/830 EM gear T EL gear Elite 50W /930 Lumen output initial (*) (lm) 6.600 5.400 Lamp efficacy initial (*) (lm/W) 85 108 Lumen output @ 2000hrs 5.600 5.300 CRI 82 90 R9 -10 40 Maintenance 10.000hrs 12.000hrs 15.000hrs 60% 55% n.a. 70% 67% >83% > 80% 80% Life (50%, hrs) 12.000 15.000

For more information, please contact Bob van der Linden Product Marketing CDM Philips Lighting GBU HID Steenweg op Gierle 417 B-2300 Turnhout, Belgium cell: + 32 471 97 76 76 email: bob.vd.linden@philips.com For more information, visit: www.philips.com/mastercolour ©2009 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 08/09 / UK - 3222 635 72641 Printed in the Netherlands