LevelOne Company Profile POR-0100 Power-Over-Ethernet Repeater Aug. 2008 Company Profile

What is POR-0100? How it works? Introduction POE forwarding Cables in an Ethernet network are limited to 100m in length, but Frequently network equipment must be connected over greater Distance. LevelOne POR-0100 lets you overcome this situation. How it works? POE forwarding POR-0100 draws its power form the network cable using Power Over Ethernet , and requires no local power supply to be installed. It can also forward POE on to other connected device such as IP cameras, wireless outdoor AP.

Good Things for POR-0100 Extends Cat.5/6/7 Cable Installations to Beyond 100 Meters Forwards Power Over Ethernet (POE) to Remote Devices No Power Cable Installation Required Fully Transparent - No Restriction to Network Traffic Simple to Install – Works Instantly Supports All Network Devices With No Degradation in Network Speed or Latency Requires No Local Power Supply Compatible with IEEE 802.3af POE Standard

Daisy-Chaining It’s possible to connect two or more LevelOne POR-0100 in a chain, with up to 100 meters of cable between each POR-0100 or device. Links may be extended up to over 700meters in this way, depending on the power requirements of the connected POE device, and other factors. In the simplest applications a POR-0100 Allows a PD device to be located 200 meters away from POE switch Extends the network connection by a further 100 meters by making use of daisy-chaining capability

Practical Applications w/ LevelOne IP Cam Standard (15.4 W) POE PSE 300m 100m POR-0100 POE Device ( 4.3 W max) Requires No Local Power Supply In the simplest application a POR-0100 allows an IP camera to be located 300m away from a POE switch The target market is : 1. Outdoor AP 2. Outdoor IP-Cam Note: These distances are typical results when used with18~19Ω 24AWG Cat5 Cable.

Practical Applications w/ LevelOne Wireless Outdoor AP POE Device ( 2.92 W max) Non-POE Switch POI-4000 PSE (40W) POR-0100 POR-0100 POR-0100 POR-0100 POR-0100 POR-0100 Requires No Local Power Supply 700m In the simplest application a POR-0100 allows a outdoor AP to be located 700m away from a POE switch The target market is : 1. Outdoor AP 2. Outdoor IP-Cam Note: These distances are typical results when used with18~19Ω 24AWG Cat5 Cable.

Maximum Range Connect with Standard 15.4W PSE End to end distance 100m 200m 300m 400m 500m Daisy-Channing ( POR-0100) 1 2 3 N/A Power Available ≦10.9 W ≦6.5 W ≦3.84 W Data only No power Connect with Hi-Power 30W PSE End to end distance 100m 200m 300m 400m 500m 600m 700m 800m Daisy-Channing ( POR-0100) 1 2 3 4 5 6 7 Power Available ≦ 25.5W 21W 16.5W 12W 7.5W 3.84W Data only No Power Connect with Hi-Power 40W PSE End to end distance 100m 200m 300m 400m 500m 600m 700m 800m 900m Daisy-Channing ( POR-0100) 1 2 3 4 5 6 7 8 Power Available ≦ 28W 25.5W 21W 16.5W 12W 7.5W 3.84W Data only No Power Note: These distances are typical results when used with18~19Ω 24AWG Cat5 Cable.

POR-0100 Works w/ LevelOne Outdoor AP Internal Testing Based on 15.4 W Standard POE (PSE) Model Name Photo (PD Device) Class Daisy-Chaining (POR-0100) Power Consumption Maximum Distance 15.4 W 30W 40W 30 W 40w WAB-7400 x 2 x 5 x6 9.23 W 300m 600m 700m WAB- 3002 5.85 W 7000 4.3 W WAP-3101 5.28 W WAP-1001 N/A Note: These distances are typical results when used with18~19Ω 24AWG Cat5/67 Cables.

POR-0100 Works w/ LevelOne IP Cam Internal Testing Based On High-Power 30/40 W Standard POE ( PSE ) Model Name Photo Class Daisy-Chaining ( POR-0100) Power Consumption Maximum Distance 15.4 W 30 W 40W 15W 30W FCS- 1101 x 2 x 5 x6 3.61 W 300m 600m 700m 1081A 4.13 W 1091 3 5.79 W 3201 2.92 W Note: These distances are typical results when used with18~19Ω 24AWG Cat5/67 Cables.

Technical Specifications Ethernet Connector type Cable type RJ 45 x 2 Cat.5/6/7 Power Max. Power POE in POE out 2.5 Watts IEEE 802.3af Class 0 ( Max 12.95 Watts) IEEE 802.3af Class 1 or 2 ( Max 6.49 Watts) LED INDICATORS POWER On: when PSE is ON , get Power form PSE . Off: when PSE is OFF , No get Power form PSE . On: INPUT Ethernet is in connection Blinking : INPUT Ethernet Data Activity Off : INPUT Ethernet is not in connection On: OUTPUT Ethernet is in connection Blinking : OUTPUT Ethernet Data Activity Off : OUTPUT Ethernet is not in connection Environmental Humidity Temperature Dimensions ( W x D x H ) Weight Compliance 5% to 95% non-condensing 0 to 50 ℃ 120mm x 90mm x 28mm 384 g FCC Rules Part 15 & CE

Thank You !