Amazon VRF Products Overview

Product Lineup

Product Lineup Offers Overview T1 Mini VRF Outdoor T1/T3 Modular VRF Outdoor Broad Indoor Offering Note: The capacity mentioned in following pages is basically for cooling

V Product Lineup T1 Mini VRF Outdoor Units Side Discharge Mini VRF Outdoor Units Dual Frequency 50/60Hz DC Inverter Rotary Compressor BLDC Fan ( BrushLess DC motor ) 10kW Nominal cooling capacities are based on the following conditions: AHRI1230 Cooling-indoor 26.7℃DB/19.4℃WB and Outdoor 35℃DB/23.9℃WB Heating-indoor 21.1℃DB/15.6℃WB and Outdoor 8.3℃DB/6.1℃WB *: EER is W/W 15/18kW Note: 1hp is 2.8kW, 1TR is 3.52kW, and 1kW is 3.41kBtu/h

V Product Lineup T1 Modular VRF Outdoor Units Top Discharge Modular VRF Outdoor Units Dual Frequency 50/60Hz - 380V, 60Hz - 230V DC Inverter Scroll Compressor & BLDC Fan 5 Basic Modular Units: 8hp, 10hp, 12hp, 14hp, 16hp Free Combination Up to 48hp with incremental 2hp, max. Indoor units up to 64 8/10hp Nominal cooling capacities are based on the following conditions: AHRI1230 Cooling-indoor 26.7℃DB/19.4℃WB and Outdoor 35℃DB/23.9℃WB Heating-indoor 21.1℃DB/15.6℃WB and Outdoor 8.3℃DB/6.1℃WB 12/14/16hp Note: 1hp is 2.8kW, 1TR is 3.52kW, and 1kW is 3.41kBtu/h *: EER/COP is W/W

V Product Lineup T3 Modular VRF Outdoor Units Top Discharge Modular VRF Outdoor Units Dual Frequency 50/60Hz DC Inverter Scroll Compressor & BLDC Fan 3 Basic Modular Units: 8hp, 10hp, 12hp Free Combination Up to 36hp with incremental 2hp, max. Indoor units up to 36 High Ambient Operation Up to 52 ℃ 8hp Standard Nominal cooling capacities are based on the following conditions: return air temperature: 29°CDB, 19°CWB, and outdoor temperature: 46°CDB, 24°CWB equivalent But our rating condition is: * AHRI1230 Cooling-indoor 26.7℃DB/19.4℃WB and Outdoor 35℃DB/23.9℃WB Heating-indoor 21.1℃DB/15.6℃WB and Outdoor 8.3℃DB/6.1℃WB *: EER/COP is W/W 10/12hp Note: 1hp is 2.8kW, 1TR is 3.52kW, and 1kW is 3.41kBtu/h

V Product Lineup Indoor Units – Ductless Type 220-230V/1Ph/50-60Hz Fit for All Outdoor Units * Total 12 families & 65 of indoor units

V Product Lineup Indoor Units – Ducted Type 220-230V/1Ph/50-60Hz Fit for All Outdoor Units . Height of low static duct is 220mm Note: HRV has air flow as its capacity

Broad Indoor Offering

V Indoor Features High Wall Global Exclusive Front Stylish Design & LED Display Built in EEV & Easy to Installation Without Built-in Drain Pump & Not Available for External Drain Pump Vitamin C and ESF Filter Optional 6 Models Ranging from 2.2kW to 7.1kW 2.2/2.8/3.6/.4.5kW . ESF – Anti Mold, Electronic Static, Active Carbon 3-in-1 filter 5.6/7.1kW

V Indoor Features Two Way Cassette Compact Design 280mm Ultra Thin Body Two Way Air Flow Quite Operation Built in High Head Drain Pump 4 Models Ranging from 2.8kW to 5.6kW 2.8/3.6/.4.5/5.6kW

V Indoor Features Four Way Cassette Compact Design, 570mm*570mm Installation Size Quite Operation Built in High Head Drain Pump 5~10% Fresh Air Inlet Except for 5.6/7.1/8.0 kW Branch Outlet Except for 2.8/3.6/4.5kW 9 Models Ranging from 2.8kW to 14kW 2.8/3.6/.4.5kW(Compact) 5.6/7.1/8.0kW 9.0/12/14kW

V Indoor Features Console Compact Design & Small Space Occupation Quite Operation Air Discharge through Top(Cooling) or Bottom(Heating) Without Built-in Drain Pump & Not Available for External Drain Pump 4 Models Ranging from 2.2kW to 5.6kW 2.2/2.8/3.6/5.6kW

V Indoor Features Floor Ceiling Compact Design Quite Operation Wide Range Angle Air Flow ESF Filter Optional 9 Models Ranging from 2.8kW to 14kW 2.8/3.6/4.5/5.6/7.1kW Ultra Thin Unit Body 199mm . 100(120 for 11.2/14) degree horizontal and 70 degree vertical air swing 8.0/9.0/11.2/14kW

V Indoor Features Slim Low Static Pressure Duct 185mm Height Ultra Thin Design Built in Drain Pump Bottom or Rear Air Return Install With or Without Discharge & Return Plenum Static Pressure Setting 0/30Pa 6 Models Ranging from 2.2kW to 7.1kW 2.2/2.8/3.6kW . The most thin design in the industry 19mm Aluminum filter is not provided and should be selected and installed in field. 4.5/5.6/7.1kW

V Indoor Features Low Static Pressure Duct 220mm Height Ultra Thin Design Optional External Drain Pump Bottom or Rear Air Return Install With or Without Discharge & Return Plenum Knock Down Coil From Bottom Static Pressure Setting 0/20Pa 6 Models Ranging from 2.2kW to 7.1kW 2.2/2.8/3.6kW 19mm Aluminum filter is not provided and should be selected and installed in field. 4.5/5.6/7.1kW

V Indoor Features Medium Static Pressure Duct Built in Drain Pump for 5.6/7.1/8.0kW Optional External Drain Pump for 9.0/11.2/14kW Rear Air Return with Plenum Flexible Discharge Duct Connection Static Pressure Setting 50/96Pa or 80/120Pa 6 Models Ranging from 5.6kW to 14kW 5.6/7.1/8.0kW 50/96Pa . 5.6~8.0kW next year will be new height 270mm design 19mm Aluminum filter is not provided and should be selected and installed in field. 9.0/11.2/14kW 80/120Pa

V Indoor Features High Static Pressure Duct Optional External Drain Pump Rear Air Return With Plenum Flexible Discharge Duct Connection Static Pressure Setting 100/196Pa 8 Models Ranging from 5.6kW to 28kW 5.6/7.1/8.0kW 9.0/11.2/14kW . 8 setting points between 100~196pa 19mm Aluminum filter is not provided and should be selected and installed in field. 22.6/28kW

V Indoor Features Fresh Air Unit Install with Other Indoor Units Together Static Pressure 100Pa Operation Range -5~43 ℃ Installed Capacity Must Less Than 30% of Outdoor Units 3 Models Ranging from 14kW to 28kW 14kW 100~180Pa . The total connection capacity of the indoor units must be between 80% and 100% that of the outdoor units, off coil temperature is certain. . For cooling is 33CDB/28CWB in and 18CDB out, and heating is 7CDB/-6CWB in and 22CDB out . For T3, 46CDB in and 33C Out 22.6/28kW 100~200Pa

V Indoor Features Heat Recovery Ventilator Efficient Heat Recovery Air Processing Heat Recovery Media Element Is Replacement As Spare part 4 Models Ranging from 150CMH to 1000CMH Illustration of how it works Warm, Exhaust Air from Inside Pre-heated Fresh Air to Inside Fresh Air From Outside Exhaust Air to Outside . 70% heat recovery efficiency . 3000 hrs after installation or 500 hrs cumulative running time.

Features & Benefits

Features & Benefits Overview Energy Efficient Broad and Flexible Indoor Offering Reliable Accurate Temperature Control Modular and Compact Design - Saves Energy - Healthy Environment - Low Operation Costs Comfortable - Easy to Transport - And Install Five Star Features

Features & Benefits Energy Efficient 180°vector dc inverter drive technology High precision control, variable frequency drive from 20 to180Hz Sine wave current drive, efficiency improve 17% comparing to conventional rectangle wave Inverter module equipped with heat dissipating fan, enhancing compressor reliability . Midea 50 steps, Haier 120 steps, . Motor speed and frequency , n=60f/p . Power factor is 0.96 . Conventional 120 degree square wave control Conventional Drive Control 180° Vector Drive Control

Features & Benefits Energy Efficient High efficiency heat exchanging technology Outdoor high efficiency four way air return heat exchanger design The compressor and condenser are placed in separated chamber High efficiency heat exchanger design Efficient φ8 inner grooved tube and 0.11 hydrophilic aluminum coil fin, corrosion and oxidation resistance treatment

Features & Benefits Energy Efficient High efficiency DC Inverter Scroll Compressor DC Inverter Scroll Compressor from Mitsubishi Electric Equipped with a “Frame Compliance Mechanism” that allows movement in the axial direction of the frame supporting the cradle scroll. This greatly reduces both leakage and friction loss, ensuring very high efficiency throughout the whole speed range .

Features & Benefits Energy Efficient 64 stage speed adjustment DC Fan Motor Efficiency increase 45% comparing with AC motor and power input largely decrease 64 stage speed adjustment plus DC inverter drive, stabilizing compressor discharge pressure and suction pressure to ensure high system reliability

Features & Benefits Energy Efficient Two stage deep sub cooling technology 1st stage sub cooling added a sub cooling coil to Condenser 2nd stage sub cooling added a stand alone Sub Cooler After further cooling, sub-cooling degree can be up to 30℃，with the heat exchanging capacity per unit mass of refrigerant improved by 46% and flow resistance reduced by 55%, and running efficiency improved by 9% Condenser 1st Stage 2nd Stage

Features & Benefits Energy Efficient Patent flow channel design Special design of streamline fan , airflow improved by 17.5%, noise reduced 3dB/A compare to previous product The new fan reduce air loss and increase heat exchange efficiency

Features & Benefits Healthy Environment 100% Independent Fresh Air System Fresh air unit can be installed with other indoor units, and introduce the outdoor fresh air into indoor

Features & Benefits Healthy Environment 3-in-1 High Efficient ESF Filter Effectively purifying indoor air by trapping harmful dust and removing unpleasant odors Note: ESF filter is only optional for High Wall and Floor Ceiling

Features & Benefits Reliable The first 2-stages oil separation and cross oil return technology in the industry – Inside module 1st stage oil separation: built-in oil separating unit ,greatly reduced the oil from the compressor discharge 2nd stage oil separation: external oil separator to separate the small amount oil from discharge Cross oil return: on the one hand to ensure the own compressor oil (red line) ,on the other hand to supply the redundant oil to other compressor (blue line) Oil Separator Fixed Compressor Inverter Compressor

Features & Benefits Reliable High pressure difference oil equalization – Among modules Using the pressure difference between suction and discharge ,to realize fast oil balance between module Cycle every 15 minutes Compressor Suction Line Separator

Features & Benefits Reliable Duty cycle operation to extend the system lifetime (combination model) The outdoor units operating changes every 24 hours Outdoor units start in turn and operation time can be balanced Inverter compressor lifetime can be extend maximum 3 times 1 2 3 2 3 1 3 1 2 . It happens on the condition of always power on . Always 1#-master module on when from power off to power on First time operation Second time operation Third time operation

Features & Benefits Reliable Backup operation If one outdoor unit get into malfunction, the other units continue to operate without affecting the whole system * In cooling mode, if the inverter compressor has malfunction, the module will shutdown, but the whole system will still run * In heating mode, if the inverter compressor has malfunction, the module will shutdown, and so does the whole system. * In both cooling and heating mode, if the fixed compressor has malfunction, the module and the whole system will keep running

Features & Benefits Comfortable Environment Low noise and Night silent running Machinery chamber is separated from air supply chamber; built-in high efficient muffler in the machinery chamber greatly reduce the compressor noise The night silent running function can be set on the outdoor PCB. The noise can be reduced by 8 dB/A at most . Night silent running once been set will be running always in Nigh Silent mode Note: The night silent mode has to be turn on and off manually

Features & Benefits Comfortable Environment Intelligent defrost Conventional defrost control(left) heating operation after all the outdoor finish the defrost Amazon outdoor defrosting(right) help each other to accelerate defrosting, not only accelerate defrosting speed, but also reach rapid heating Defrost rapidly Defrost clean Heat support Module 1 Module 2 Module 3 Indoor temperature fluctuations small Condenser heat absorption Condenser heat dissipation

Features & Benefits Comfortable Environment Precise temperature control DC inverter control, temperature could be controlled precisely within range of ±0.5℃

Features & Benefits Modular & Compact Design Easy transportation Outdoor footprint only occupy 0.74m^2(8/10hp) and 1.04m^2 (12/14/16hp) Can lift with elevators and save lots of transport cost and time

Features & Benefits Modular & Compact Design Flexible installation Long pipe length and large drop Total 300m liquid refrigerant piping length Max.175m refrigerant piping length for single way Max.50m height drop when outdoor unit is above indoor unit Max.40m height drop when outdoor unit is below indoor unit Max.15m height drop between indoor units under same outdoor unit

Features & Benefits Modular & Compact Design Outdoor high external static pressure Up to 50Pa and can be installed at different floors 50Pa ESP Notes: Condensing fan has 50Pa ESP, can connect up to 5m(10Pa for 1m) exhausting duct.

Controllers and BMS

Controllers and BMS Solutions Overview Stand Alone Controllers Central Controllers LonWorks Converter BacNet Converter

V Controllers & BMS Functions Overview Stand Alone Controllers Auto/Cool/Dry/Heat/Fan Mode Setting Auto/Low/Mid/High Fan Speed Setting Temperature Setting Clock and Timer Setting Central Controllers Group Control & Unit Control Weekly and Monthly Timer Management Power Metering, System Running Recording and Report BMS Converters BMS Integration Failure Code Display, System Running Recording and Report Remote Monitoring Central controller can work BMS together, but have to make sure there is only one system working at one time.

V Controllers & BMS Individual Controllers Wireless Controller LCD Display Standard offer for High Wall and Console Units Optional for Duct, Cassette and Floor Ceiling Units Wired Controller Standard offer for Duct, Cassette, Floor Ceiling, and Fresh Air Units Not optional for High Wall and Console Units Can also work as a group controller controlling up to 16 indoor units

V Controllers & BMS Touch Screen Central Controller Touch Screen Central Controller can control up to 128 indoor units IGU05 Protocol Translator Max.64 indoor units under one IGU05(one modular or combination outdoor system) No.1 220-240V/1/50-60Hz No.1 No..2 No..64 RS-485 max. 1000m ～ No..2 Max. 32 units of IGU05 YCZ-A003 Touch Screen Central Controller No..32 Note: (number of IGU05) x (number of indoor units under each IGU05) should be no more than 128

V Controllers & BMS Central Controller With Monitor Software Central Controller With Monitor Software can control up to 400 indoor units Monitor Software IGU02 Protocol Translator Max.40 indoor units under one IGU02(one modular or combination outdoor system) No.1 Ammeter No.1 No..2 No..40 RS-485 max. 1000m RS-232 or USB No..2 Ammeter Max. 32 units of IGU02 HCM-01 Central Controller With Monitor Software No..32 Ammeter Note: (number of IGU02) x (number of indoor units under each IGU02) should be no more than 400

V Controllers & BMS LonWorks LonWorks Converter can control up to 32 indoor units JCI Metasys IGU06 Protocol Translator Max.32 indoor units under one IGU06(one modular or combination outdoor system) JCI Net Control Engine TCP/IP No.1 No..2 No..32 RS-485 max. 1000m Note: 1. One LonWorks IG07 Converter can Only work with ONE Protocol Translator IGU06 2. Please use LonTalk Card U10(75010R) to commissioning NCE & IGU07 3. Please buy U10(75010R) locally from Echelon, suggest One branch office getting one Card LonWorks U10(75010R) LonTalk Card IGU07 LonWorks Converter

V Controllers & BMS BacNet/IP JCI Metasys BaNet/IP Converter can control up to 72 indoor units IGU02 Protocol Translator Max.40 indoor units under one IGU02(one modular or combination outdoor system) JCI Net Control Engine TCP/IP No.1 Ammeter No.1 No..2 No..40 RS-485 max. 1000m for each group BacNet/IP No..2 Ammeter Max. 20 units of IGU02 . Under NCE25 series is 72 indoors, and one NCE2560 control two HCM-03, NCE2560 can control up to 2000 points, one indoor is 12 points. . Under NCE55 series is 250 indoors . The capacity is both limited to NCEs capacity and HCM-03 structure No..20 Ammeter HCM-03 BacNet/IP Converter Note: (number of IGU02) x (number of indoor units under each IGU02) should be no more than 72