How can I Fix my HP Printer Error Code 0xc19a0013?

Method : 1 Open the right side of the printer On the mother board simply reset the 2 white cables.

Method : 2 Disconnected the USB cable if it is plugged into a computer. Remove the cartridges from the printer as well. With the power still on, unplug the power cord from the back of the printer, as well as the wall, then wait about 60 seconds. Plug it back in to the wall first, then the printer, allowing it to boot up.

Method : 3 If you get the same error message, if you have a number pad on the printer, do the same steps but before plugging it back in, hold the "#" button with the number "3", and plug in the power cord back into the printer while holding the buttons down. Once the printer starts showing that it's coming back up, you can let go of the buttons, and allow it to come back up. If you still continue to get the message, then do the same thing except hold the "#" button and the number "6" on your keypad and allow it to come back up.

Method : 4 Check the cartridges If any fault replace it. Most of case cartridge might be fail to work.

Method : 5 Reinstall the print head You can try it. Mostly people face such issues due to it.

Method: 6 Press the Power button to turn on the product. Unplug the power cord from the wall outlet. Wait at least 15 seconds. Plug the power cord back into the wall outlet. Reconnect the power cord to the rear of the product.