Sheet Metal Development

Slides:

Advertisements

Similar presentations

Flexible Manufacturing Common Sheet Metal Seams Copyright © Texas Education Agency, All rights reserved.

Advertisements

Facts about the Tetrahedral Kite 1.Four pyramid shapes are joined together to make the Tetrahedron Kite. 2.Each pyramid shape is built according to the.

Living with the lab Prototyping with Sheet Metal.

How to Make a Hot Air Balloon

Both the dome and slab design use a 5 gallon bucket in the middle to be used as a squat hole FINAL MOLD DESIGN.

Cut off the top off an aluminum can. Exploration Warning: Be very careful not to cut yourself on the sharp edges of the can.

Chapter 4: Sheet Metal Forming

Auxiliary Views.

Sheet Metal & Tools. Sheet Metal What is Sheet metal? What do we use sheet metal for? What are some common sheet metal tools?

Copyright © Texas Education Agency, All rights reserved.

Origami Flower Instructions. 1. Arrange the origami paper on a flat surface, color side down, with one corner pointing at you.

Sewing. Tracing patterns on fabric Put enough pressure on the tracing wheel to transfer the pattern markings onto the fabric Put enough pressure on the.

HOT AIR BALLOON CONSTRUCTION A LOOK AT HOW HEAT IS TRANSFERRED IN THE ATMOSPHERE.

Masonry Tools Flip Book Instructions. Step 1: You need 5 pieces of paper. Lined or plain will work. You also need a pen and a ruler. Draw a line down.

Let’s build a snowman!!. Vocab Words: Snow Man Snowflake Card Snow Christmas Tree.

An Easy Way to Bind a Book ESL 6. Step one Each sheet needs to be folded in half - exactly -

116- Trade Skills Hems, Edges, and Seams.

Sheet Metal Development Copyright © Texas Education Agency, All rights reserved.

Chapter 10 Sheet Metal Design. After completing this chapter, you will be able to perform the following: – Start the Autodesk Inventor sheet metal environment.

MR. PATTERSON CONSTRUCTION TECH 1

Sheet Metal Forming Processes

School Name Date Volunteer Name Electric Generator SEEDKIT Workshop.

How to Create a Flair with no welding Tools and material Layout and Determine Material size Cut out blank Reference Lines Create Flanged edge Shape Flange.

History Foldables Mr. Harpine.

Packaging. First choose an illustration or use the image provided on the cover CD. When printing out your illustration it's a good idea to mark the way.

Ð Objective: Use the positive and negative space found in lettering ð Use both the positive space and the negative space of the letters in your first and.

ASSIGNMENT D11 ADVANCED 3D TOOLS. ADVANCED TOOLS Sweep – Moving a cross-section through a path two form a three-dimensional object Needs a Cross-section.

Below is a detailed process of how the Iron gong vase is being produced.

7th Grade Sewing Notes Today’s Teen Chapter 33 Page

Teaching Aid Invention By Stuti-G 5-E Navrachana school Sama.

SHEET METAL FORMING PROCESS / PRESS WORKING OF SHEET METALS

Let’s build a snowman!!.

How to make a 3D Snowflake Using recycled paper. Step 1. Using template cut out 6 additional squares. Using template cut out 6 additional squares. –(Or.

Collect 4 sheets of paper and layer them about 1.5 cm apart vertically. Keep the edges level. Fold up the bottom edges of the paper to form 8 equal tabs.

The Fractal Vortex of Learning A Project to Demonstrate Your Learning.

How to mark out, cut, shape and finish. Marking Out For straight lines use a ‘scriber’ and an ‘engineers square’

SHEET METAL process.

Sheet Metal: Notes and Descriptions MachinesProceduresTools.

Build a Simple Electric Motor Uses a stator made of windings, an armature with two coils, and a commutator.

1. Lab 5: Model Making: Polyhedron IAT 106 Spatial Thinking and Communication.

Circle Folding.  1. Cut out circle  2. Fold the circle in half  3. Fold the circle in fourths  4. Unfold and mark the center with a dot  5. Write.

Glass Box Creation and Use. Glass Box for Drawing  Glass box to guide creation of multi-view drawings.

Building Boxes What is the largest volume open top box that you can build from an 8 ½ by 11 inch sheet of paper?

Fabric Arts I Photo Transfer Pillow. Steps 1 & 2 Pin your “A” strips to your “C” strips with face sides together.

Project Planning Ag. Engineering 1. Sharp Lead Pencil First item needed for the highest quality drawing Used to draw good quality lines.

Air Powered Rocket. Rocket Body Lay two pieces of paper with their long sides over lapping Tape the paper together Roll the paper into a tube using the.

The first step is to measure the depth of your box.

SOUTH DAKOTA AFNR Academic Integration Activities: Example #3.

History Foldables Mr. Harpine. Step Book - Timeline  Fold 2 sheets of paper in ½ the short way  Make a fold in the first piece 3 ½ inches from the edge.

Reading Drawings.

Flexible Manufacturing

Place template on top as guide for cutting

Fabric Arts I Photo Transfer Pillow.

Basic Foldable Shapes.

Robotics and Automation

Lay two pieces of paper on top of each other. Fold paper “hotdog”.

Perforator process.

Shape and One Point Perspective Project

Hot-Air Balloons.

Engineering Applications Level 1 Explain Pattern Development

Fold Your Own Bank Activity

Principles of Art Notes Page.

Glass Box: Creation and Use

Glass Box: Creation and Use

Glass Box Creation and Use.

Tool ID Week 7 Clamps and Vises.

1 1/8” 1 1/8” 1 1/8” 3/8 boarder 1 1/8” 1 1/8” 1 1/8”

Multiview Drawing Orthographic Projection

Supplies needed 1 flat nose plyers 1 round nose plyers 1 cutters

Presentation transcript:

Sheet Metal Development

Fold The location for a bend in the metal -

Hem A fold along the edge of the metal to strengthen the edge and to give it smooth edges -

Layout Transferring the size and shape of the object to material to be cut and shaped-

Reverse Engineering Taking a product and looking at how it is produced and then remaking it -

Sheet Metal Development Shows a sheet metal project or product in a flat view -

Tab A small flat strip used for fastening

Reverse Engineering of a Box Lay out a small box Unfold the box

Box Being Unfolded Tabs folded Tabs to be folded

Unfolding the Box

Unfolding the Box These are the sides and bottom of the box that has been unfolded. The box would have to be taped together on the edges to assemble it.

Development The box that will be produced will have tabs on some edges so that the box can be glued together instead of being taped.

Development Drawing of the Box

Problem Your boss comes in and asks you to draw a sheet metal development for a 90 degree elbow. He gives you a sketch to use as a guide.

Design Questions What is the overall size of the elbow? 4 in X 4 in X 4 in long What is the duct size? 2 in X 4 in What size piece of metal will have to be used to make the elbow? 8 in X 12 ¼ in

Making a Three View Drawing

Pictorial of the Elbow

Unfolding of Elbow

Unfolding of Elbow

Unfolding of Elbow

Elbow Layout / Development Plan

Elbow Ready for Development

Elbow Assembled

Tool Tray

Assignment You will reverse engineer the tool tray. The tray will be made out of four pieces of 18 to 20 gauge metal material. The bottom and sides will be from one piece. There will be two ends. There will be a handle.

Assignment All helms and tabs will be ½ inch. The handle will be made in a V shape with helms on the inside and tabs bent outwards. Bottom and sides will have helms and tabs. Ends will be flat. Pop rivets or spot welds will be used to connect all pieces together.

Assignment What size will the pieces of sheet metal be to make the tool tray? Bottom and sides = 11 in X 13 in Ends = 3 in X 8 in Handle = 3 in X 13 in