Digi-Cell V2 Driver Setup Welcome to Digi-Cell V2 Driver Setup The following presentation will provide you with an overview of how to setup and install the USB drivers for the Innovations Digi-Cell V2

Digi-Cell V2 Driver Setup Once the drivers have been downloaded from http://www.inpd.co.za please extract them to a folder of your choice. Then browse to the “CP210x\Windows_2K_XP_S2K3_Vista” folder. There will be a file called “CP210xVCPInstaller.exe”. Double click on it.

Digi-Cell V2 Driver Setup The driver version will be displayed and should you wish to install the drivers please click “Install”. If you wish to change the file locations you may do so by selecting the “Change Install Location…” Button

Digi-Cell V2 Driver Setup Once the drives have installed you can plug in the Digi-Cell via the USB port. Your PC should automatically install the new hardware as “CP210x USB to UART bridge (COMx)” where x represents a communication port number. This will be the port number to use when using the Digi-Cell Maintenance program or any other utility using the Digi-Cell V2

Digi-Cell V2 Driver Setup Thank you for attending this presentation. Should you have any questions or need further assistance please feel free to contact our offices at: Building E Lonehill Office park Lonehill Boulevard Lonehill Telephone: +27 11 465 3228 Facsimile: +27 11 465 9541 support@inpd.co.za