Products Powder Coating Booth Liquid painting Booth Batch Type Oven ( Electrical/oil/Gas) Pre-Treatment Plants and accessories Conveyorised Powder coating and Liquid Painting Plant ( Turnkey Basis) Material Handling System Hot water Generator Effluent Treatment Plant Fume Exhaust System / Scrubber Fire Safety System Air Supply Unit Solution of Coating Impaste is a leading organization providing Surface Coating System. We design and build turnkey Powder and Liquid paint plants with state of art in-house manufacturing facilities at Bangalore. We have established ourselves and gained expertise in the field of surface finishing technology to design and build different types of Pre-treatment, Powder Coating and Liquid painting plants. VisionMission  Excellence  Quality  Integrity  Technology  Learning & Sharing  Customer Satisfaction  Contribution to Industry & Society  User Friendly  Plant & Technology of International Standards  Advance & Innovations IMPASTE TECHNOLOGY

Pre Treatment Plant: Pre Treatment is a process for corrosion protection of the components such as aluminium, steel etc. We design two type of pre treatment plant depend on the size of the component, production requirement and based on the customer requirement. 1. Dip Type Pre Treatment Process: Dip Pretreatment Plants are commonly used for long & heavy components to clean prior to powder / paint application. Dip Pretreatment is a pre-treatment wherein the chemicals are stored in the steel (MS/SS) fabricated tanks. The components are placed in the baskets or cages and they are dipped in each process tank for pre-fixed period of time. Material handling system: Hoist/ PLC Operated Transporter. 2. Spray Type Pre Treatment Process: We offer Spray Pretreatment plants made of complete Stainless steel/MS spray tunnels along with direct or indirect heating system with hot water generator, Pumps (Vertical/ Horizontal), Easy clip on nozzles. Material Handling System: Conveyorised Pre-Treatment Accessories: Oil Skimmer An oil skimmer is a machine that separates oil from another liquid. A common application is removing oil floating on water. These technologies are commonly used for industrial Paint Shop applications such as removing oil from PT Tanks. Plated Heat Exchanger ( PHE) A plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional heat exchanger in that the fluids are exposed to a much larger surface area because the fluids spread out over the plates. This facilitates the transfer of heat, and greatly increases the speed of the temperature change. Filter Press Filter press is a separation process, specially employed by solid/liquid separation using the principle of pressure drive, provided by a slurry pump. Filter press is a fixed volume and batch operation, which simply means that the operation must be stopped to discharge the filter cake before the next batch can be started. The major components of filter press are skeleton and filter pack. The skeleton holds the filter pack together while pressure is being developed inside filter chamber. It however can only hold a specific volume of solids.

Powder Coating Plant: Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electro statically. Powder coating is mainly used for coating of metals, such as household appliances, aluminium extrusions, drum hardware, and automobile and bicycle parts. Liquid Painting Plant: Liquid coatings do offer some advantages over powder coating. First of all, liquid paint does not form as thick or heavy of a coat as powder coating. This is extremely important when working with very tight and specific tolerances that are involved with the final assembly of a product. Secondly, liquid paint is an excellent alternative to powder coating when working with very specialized paint colours that may be too difficult or time consuming to be colour matched as a powder. This is especially true when dealing with metallic or high gloss colours. In addition, liquid paint can be applied to any type of surface and does not require the use of heat to achieve curing. Liquid painting is very common when dealing with smaller, short run quantities that can be done in batches. We are design and build batch type or turnkey basis high performance Liquid Paint plant. In order to assist in the removal of the over sprayed paint from the air and to provide efficient operation of the down-draft, water-washed paint spray booths utilize paint. Cyclone Type Filter cartage

Side Draft/Wet Type Booth Down Draft Type Booth Curing Oven: Ovens are heated chambers used for a variety of industrial applications, including drying, curing, or baking components, parts or final products. Industrial ovens can be used for large or small volume applications, in batches or continuously with a conveyor line, and a variety of temperature ranges, sizes and configurations. 1.Conveyor or Continuous Ovens 2. Batch Type Oven Oil and Gas Fired oven Electrical oven Liquid Painting Booths Side Draft/Dry Type Booth

Cathodic Electro deposition (CED): Cathodic Electro Deposition is deposition of thin layer of paint by dipping the component Inside the +vely charge bath by applying high voltage DC. Single Coat CED Process 1.Higher Productivity 2.Environment Friendly 3.Cost Saving 4.Improvement in quality 5.No complicated HVAC design involved Cathodic Electro Painting System FactorWater Based High Solids Convention al Solvent Based Powder Coating Electro Painting Film UniformityFair GoodExcellent Application efficiency Fair Excellent Cavity/Recessed area coverage Fair PoorExcellent Film Thickness ( micron) Warp/Flexibility Resistance GoodVery Good Excellent Resistance to Runs and sags Good Excellent Ease of color change GoodExcellentGoodModeratePoor Contamination Problems LowFairLowHighSlight Properties of The Electrodeposited Paint Film  Comparatively smaller size of paint particles nm  Complete interaction of the reactive group  Maximum cross linking density  Extensive 3 dimensional fine globular network, uniform & dense  Uniform Thickness: Even in recess area  Growth of the film in a specific three dimensional manner

Material-handling equipment: Material-handling equipment is equipment that relate to the movement of goods and products throughout the process of Painting & pre treatment. Material handling equipment is the mechanical equipment involved in the complete system. PLC Based Transporter Hoist Power and Free Belt Conveyor Heavy Duty I beam closed track Painting Plants Accessories: Powder Coating Gun: The most common way of applying the powder coating to metal objects is to spray the powder using an electrostatic gun. The gun imparts a positive electric charge to the powder, which is then sprayed towards the grounded object by mechanical or compressed air spraying and then accelerated toward the work piece by the powerful electrostatic charge. There are a wide variety of spray nozzles available for use in electrostatic coating. Fume Exhaust /Scrubber: Fume Exhaust cum Scrubber system is provided to wash out the hazardous nature of the fume from the plant. This system is also protect the human, machine and environment. Type: 1) Wet Scrubbing 2) Dry Scrubbing Effluent Treatment Plant: Effluent treatment plants are also called as industrial waste water treatment plant adequately treats specific industrial waste waters. ETP may reduce raw water costs by converting selected waste waters to reclaimed water used for different purposes. ETP are reduce concentrations of pollutants measured to determine user fees. An ETP may include one or more of the following rather than the conventional primary, secondary, and disinfection sequence of sewage treatment.

IMPASTE TECHNOLOGY Office: #11, Adarasha Layout, 2 nd Cross, Jnana Jyothi Nagar, Mallathahalli, Bangalore Phone / E mail: Air Supply Unit: Air handler is usually a large metal box containing a blower, heating or cooling elements filter racks or chambers, sound attenuators, and dampers. Air handlers usually connect to a ductwork ventilation system that distributes the conditioned air through the Plant. Dry Type ASU and Wet Type ASU. Hot Water Generator/ Boiler: Water heating is a thermodynamic process that uses an energy source to heat water above its initial temperature. Typical domestic uses of hot water include cooking, cleaning, bathing, and space heating. In industry, hot water and water heated to steam have many uses. The hot water boilers are designed to operate on various types of fuels such as heavy oil, light oil, gas, duel fuel, coal, husk and other agro waste fuels. hot water boilers in the range of 25,000 to 8,00,000 kcal per hour Fire Safety System: Complete fire safety system for the plant. Automatic fire systems based on auto sense of fire and start the alarm system immediately. System consist of smoke detector, flame sensor, nozzles etc. We offer co2 flooding and water sprinkler system for the plant.