Internal Use Only ▲ 1 3. Software Download Software download platform: FlashTool_E2_2.12Software download platform: FlashTool_E2_2.12 Double-click the shortcut iconDouble-click the shortcut icon

Internal Use Only ▲ 2 3. Software Download Main interfaceMain interface

Internal Use Only ▲ 3 3. Software Download Correct settings of Communication SetupCorrect settings of Communication Setup Select Phone SoftwareSelect Phone Software Click the button to select *.fls fileClick the button to select *.fls file

Internal Use Only ▲ 4 3. Software Download

Internal Use Only ▲ 5 3. Software Download Select FLASH File SystemSelect FLASH File System Click the button to select *.dffs fileClick the button to select *.dffs file

Internal Use Only ▲ 6 3. Software Download

Internal Use Only ▲ 7 3. Software Download Select Customization, and click Remove AllSelect Customization, and click Remove All Click Add to select *.cust fileClick Add to select *.cust file

Internal Use Only ▲ 8 3. Software Download

Internal Use Only ▲ 9 3. Software Download Note: Close the software after setting, and then open it again. Such action aims at saving the settings successfully even if the software is not closed normally. Note: Close the software after setting, and then open it again. Such action aims at saving the settings successfully even if the software is not closed normally.

Internal Use Only ▲ Software Download Click StartClick Start

Internal Use Only ▲ Software Download The following interface will appear after click StartThe following interface will appear after click Start Click Start COM3Click Start COM3

Internal Use Only ▲ Software Download The following interface will appear after click Start COM3The following interface will appear after click Start COM3

Internal Use Only ▲ Software Download Note: Make sure that you installed battery to the mobile phone before software download. And there should be enough battery capacity. Otherwise the mobile phone will fail to do software downloadMake sure that you installed battery to the mobile phone before software download. And there should be enough battery capacity. Otherwise the mobile phone will fail to do software download Click Start COM3 before you press Power keyClick Start COM3 before you press Power key Connect the data cable with mobile phone and switch it on, then start software download operationConnect the data cable with mobile phone and switch it on, then start software download operation

Internal Use Only ▲ Software Download DownloadingDownloading

Internal Use Only ▲ Software Download DownloadingDownloading

Internal Use Only ▲ Software Download DownloadingDownloading

Internal Use Only ▲ Software Download Download successfullyDownload successfully The download process lastsThe download process lasts about 2 minutes about 2 minutes The phone will be unlocked afterThe phone will be unlocked after software download operation

Internal Use Only ▲ 18