C-shaped steel beam pulley cable pulley lifting and installation work status

C steel cable pulley crane works Mobile C -shaped steel cable pulley for a large double girder gantry crane, trolley, electric hoist, a total of cables easy to move easily damaged cable has the advantage.double girder gantry crane 1, the fixed- hanging wire frame is installed, should be hung behind a block of iron. 2, adjust traction head, so that the car does not touch on the entire trip up and down the edge of the hole traction as well. 3, the cable length is 1.2 crane span doubly 8 meters. 4, adjust the traction rope to the same section of the cable length is less than the length of the tow rope force runtime. 5, when the cable diameter range, sandwiched between the cable should be soft rubber pads to the same diameter, so that the cable clamp. 6, when the cloth cable, overhead crane you should consider both sides of the cable tray force balance.overhead crane 7, when the cable pulley is two, three, the requirements are different. 8, two washers on the pulley device to adjust the washer when the rail is not timely, the washer on the inside of the fixing plate to adjust the width of the gauge, the factory is made ​​by rail 1160x88x6 photo.

Beam pulley installation instructions 1, the fixed- hanging wire frame is installed, should be hung behind a baffle. 2, adjust traction head, 5ton pillar motorized jib crane so that the car does not touch on the entire trip up and down the edge of the hole traction as well.5ton pillar motorized jib crane 3, the cable length is 1.2 crane span doubly 8 meters. 4, adjust the traction rope to the same section of the cable length is less than the length of the tow rope force runtime. 5, when the cable diameter range, sandwiched between the cable should be soft rubber pads to the same diameter, so that the cable clamp. 6, when the cloth cable, you should consider both sides of the cable tray force balance. 7, when the cable pulley is two, three, 100 ton crane for sale the same requirements.100 ton crane for sale 8, the double pulley on the gasket means is an adjusting washer, when the rail is inappropriate, the gasket on the inside of the fixing plate to adjust the width of the gauge.