Alarm units AL 175 NT and Aeon Gold For small, medium and large power range

AL 175 NT System voltages: 24, 48 or 60V Microprocessor controlled Two alternative PC- connections: VT 100- connection Winpower- connection Remote interrogation: Volt- free relay contacts Modem callback SNMP Control unit for small and medium systems

AL 175 NT Features: System and battery supervision/monitoring Access via PC (RS232), modem, SNMP or key pad Programmable alarm outputs Optional Features: Temperature compensated charging Four bank symmetry alarm unit Industrial Modem Windows software package – Winpower SNMP connectivity Functionality

AL 175 NT Features: High battery voltage Low battery voltage Mains failure Module failure Critical module failure Battery fuse failure Load fuse failure Low voltage disconnect Battery fail Temperature Alarm Symmetry failure Alarm Type

AL 175 NT Resetting of alarms System output status and message store Battery test data Voltage level settings and adjustment Site details Alarm output programming Remote control of relay outputs PC facilities

AL 175 NT Parameter calibration Clock and date adjustment Battery maintenance System on/off Boost charging Battery current limitation Battery temperature surveillance PC facilities - continues

Aeon Gold Aeon 4000 w /Aeon Gold & SMPS4000 *TCP/IP *SNMP Aeon Gold Display Unit *Advanced setup and *monitoring through *WinPower *SW Download PC w /WinPower Aeon Gold Control Unit *CAN Bus System Overview

Aeon Gold User friendly interface with keypad and graphical display System parameters can be seen and altered Graphical Display Green LED - Power Keypad Red LED - Alarm 3 Keys for menu scroll 10 Numerical keys 1 key for scroll back HW Specification

Aeon Gold SW appload 10 Digital outputs (Relays) WinPower Modem, TCP/IP, SNMP 7 Digital inputs Upper position- control unit alarm Enabling sw appload Red LED, when in service mode HW Specification Cont.

Aeon Gold 5 Current inputs 5 Voltage inputs 2 Temperature inputs System connections: AC & DC input LVLD & LVBD Battery & Load fuse alarm Keypad connector 2 CAN bus connectors DC Fuse Green LED, Heartbeat Reset button Calibration output, 60mV HW Specification Cont.

Aeon Gold Menu Structure

Aeon Gold Features: Output voltage monitoring and control Load and battery current monitoring and control Individual rectifier control Temperature compensated charging Boost charging Battery testing Fuse monitoring Functionality

Aeon Gold Features: Alarm log LVD disconnect for load and/or battery Advanced alarm/event setup Advanced configuration of relay outputs Communication through IP Symmetry monitoring Capacity and backup time calculation Functionality Cont.

Aeon Gold A Windows NT, Windows 98 software package for Aeon Gold. All configuration and change of parameters can be done here. Communicating with Aeon Gold through PCOMM protocol. Configuration of relay outputs and trend data is not available from graphical display. Winpower must be used. WinPower 4000