1. RAD 354 Chapt. 25 Fluoroscopy Fluoro’s primary function is to enable one to view the patient in “real time” with dynamic motion

2. Fluoro was first invented by Thomas Edison in 1896 Utilized a conventional x-ray unit with a fluorescent screen that would convert the x- rays exiting the patient to low level light the radiologist could view

3. Image Intensified Fluoro

4. II

5. II Tube Parts Input phosphor Photocathode (photo emission) Evacuated glass envelope Electrostatic focusing lens (neg. charged!!!) Anode Output phosphor

6. II Fluoro Increased image brightness with II over “direct” fluoro is the biggest advantage of II – Maintains OD by “automatic brightness control” (ABC) that the radiologist can preset and control

7. Eyes use rods and cones Photopic vision – daylight vision uses the CONES Scotopic vision - night time vision and uses the RODS

8. Fluoro Techniques Fluoro usually is operated at 5 mA and uses highest optimum kVp Back up timer = 5 minutes Protective Fluoro measures – Bucky slot cover – Lead curtain – Lead gloves and aprons (secondary barriers) – Distance

9. Gain Minification gain (ratio of input to output sizes) Flux gain – ratio of # of inpupt PHOTONS to output LIGHT PHOTONS Brightness gain (total brightness gain) = minification gain X flux gain

10. Fluoro Magnification Most fluoro II units have DUAL input phosphor sizes (9” and 6” {27/17cm}) – Some have TRI sizes input (trifield tubes 27/17/12cm) The crossover of the electron stream distance from the output phosphor determines the amount of magnification Mag mode = BETTER SPATIAL RESOLUTION, better contrast, HIGHER pt. dose!

11. TV Monitoring Must “couple” the output phosphor to a TV camera tube or photomultiplier tube – Vidicon is the MOST frequently used tube – plubicon and image orthocon are also tube types – Fiber optics and beam splitters are used to help direct the digitized image to the various destinations (TV monitor, photo spot film, VCR/CD recorder, cine camera)

12. Vidicon Camera (tube)