1. Example

2. Outline How to get live stream How to set audio on/off How to get schedule Logs How to query events How to get DI/DO status How to control DO How to get PTZ preset list How to execute preset go/clear How to execute preset set How to logout live view How to use playback

3. Outline(cont) How to export video How to take snapshot How to connect to Titan How to get event notification How to send audio to camera Note

4. Step 1 : create handle and get device list (as login) How to get live stream 1 2 3 4

5. How to get live stream (cont) After create handle and get device list

6. How to get live stream (cont) Step 2. Create player and get sensor profile 6 5 7

7. How to get live stream (cont) Step 3. Select profile and attach session 8 9

8. How to get live stream (cont) After select profile and attach session

9. How to get live stream (cont) You can connect/disconnect multiple cameras by push attachsession/detachsession button.

10. How to set audio on/off Audio On: Enter camera ID and push “SetAudioOn” button. 1 2

11. How to set audio on/off Audio Off: Enter camera ID and push “SetAudioOff” button. 1 2

12. How to get schedule logs Step1. Create MainConsolePlayback handle and Get record date list

13. How to get schedule logs Step2. Enter query date and get schedule logs 1 2

14. How to get schedule logs After enter query date and get schedule logs

15. How to query events Create MainConsolePlayback handle and enter query criteria 12

16. How to query events After enter query criteria

17. How to get DI/DO Status DI 1 2

18. How to get DI/DO Status DI

19. How to get DI/DO Status DO 1 2

20. How to control DO Control Digital output 1 2 3

21. How to Get PTZ Preset List Get PTZ preset list 1 2

22. How to Get PTZ Preset List After get PTZ preset list

23. How to Execute Preset GO/Clear Preset go 2 3 1

24. How to Execute Preset GO/Clear Preset clear 2 3 1

25. How to Execute Preset Set Preset Set 1 32

26. How to logout liveview 1 2

27. How to logout liveview(cont) 3

28. How to use playback Step 1 : create handle and get device list 1 2 3 4

29. How to use playback (cont) after create handle and get device list

30. How to use playback (cont) Get record date list

31. How to use playback (cont) After get record date list

32. How to use playback (cont) Get record logs 5 6

33. How to use playback (cont) After get record logs

34. How to use playback (cont) Step 2. Create player and attach session 8 7 9

35. How to use playback (cont) Step 3. Select time period in the record logs and open record 10 11 12

36. How to use playback (cont) After click “Play” button 13

37. How to export video Follow the steps of How to use playback, until the “Play” button is enabled.How to use playback 0

38. How to export video(cont) Make sure the time, exclude audio, profile, path are all correct, and then click “Export”. 1 4 5 3 2

39. How to export video(cont) After pressed “Export”, check progress and wait for complete, or press “StopExport” to cancel it. 1 2

40. How to take snapshot Follow How to get live stream or How to use playback to get video shown.How to get live streamHow to use playback

41. How to take snapshot Switch to “General” tab, check the save path, and then click “SnapShot”. 1 2 3

42. How to connect to Titan Make sure you choose “Corporate”, and then create handle and get device list, 1 2 3 4

43. How to connect to Titan(cont) And then you can do all the operations as connect to MainConsole, except: – You can use both live view and playback after create the same handle. – Get schedule log is not supported. – Need to specify range before get record date list.(see next slide)

44. How to connect to Titan(cont) Set date before you get record date list, say 2011/12/1 1 2

45. How to connect to Titan(cont) After get record date list, only results from 2011/12/01 to 2011/12/31 will be queried. 1 2

46. How to get event notification Enable event notification on your server.

47. How to get event notification Create handle and press SubscribeEvent button. 1 2

48. How to get event notification Start to receive event.

49. How to send audio to camera Create handle and get device list. 1

50. How to send audio to camera Create handle and get device list. 1 2

51. How to send audio to camera Go to Liveview page and set camera device id. 1 2

52. How to send audio to camera Press EnableTalk button and start send system input audio.

53. Note Please install the vcredist_x86 before start using SDK and Tester.