1. NETGEAR CONFIDENTIAL FVS338 ProSafe VPN Firewall 50

2. NETGEAR CONFIDENTIAL Main Features RS232 Serial Port with DB-9 connector –Analog Modem support for auto failover capability. SNMP support (optimized for NMS100) – SNMPv2. QoS traffic prioritization. Fast - 90+ Mbps WAN-LAN and up to 60+ Mbps 3DES throughput. SPI Firewall and multi-NAT. Support 50 VPN tunnels. Includes VPN client software with 1-user license. Future upgradability to SSL VPN, IDS, Anti-virus, anti-spam and anti-spyware security measures.

3. NETGEAR CONFIDENTIAL ProSafe Firewalls Comparison

4. NETGEAR CONFIDENTIAL Front Panel

5. NETGEAR CONFIDENTIAL LEDs

6. NETGEAR CONFIDENTIAL Rear Panel

7. NETGEAR CONFIDENTIAL Bottom Label

8. NETGEAR CONFIDENTIAL GUI

9. NETGEAR CONFIDENTIAL http://192.168.1.1 Username: admin Password: password

10. NETGEAR CONFIDENTIAL WAN Setup – Broadband ISP Settings

11. NETGEAR CONFIDENTIAL Setup Wizard

12. NETGEAR CONFIDENTIAL WAN Status

13. NETGEAR CONFIDENTIAL WAN Setup – Dialup ISP Settings

14. NETGEAR CONFIDENTIAL WAN Setup – Dialup ISP Settings Modem properties can only be specified when modem type is user defined.

15. NETGEAR CONFIDENTIAL WAN Setup – DIAL UP Status

16. NETGEAR CONFIDENTIAL WAN Setup - Mode

17. NETGEAR CONFIDENTIAL WAN Setup – Options (Broadband) 28Kbps to 100Mbps

18. NETGEAR CONFIDENTIAL WAN Setup – Options (Dialup)

19. NETGEAR CONFIDENTIAL WAN Setup – Dynamic DNS

20. NETGEAR CONFIDENTIAL WAN Setup – Traffic Meter

21. NETGEAR CONFIDENTIAL WAN Setup – Traffic Meter Statistic by Protocol

22. NETGEAR CONFIDENTIAL Security – Groups and Hosts

23. NETGEAR CONFIDENTIAL Security – Groups and Hosts Add

24. NETGEAR CONFIDENTIAL Security – Groups and Hosts Edit Group Names

25. NETGEAR CONFIDENTIAL Security – Source MAC Filter

26. NETGEAR CONFIDENTIAL Security – Block Sites

27. NETGEAR CONFIDENTIAL Security – Rules

28. NETGEAR CONFIDENTIAL Security – Rules – Outbound Services

29. NETGEAR CONFIDENTIAL Security – Rules – Inbound Services

30. NETGEAR CONFIDENTIAL Security - Services

31. NETGEAR CONFIDENTIAL Security - Schedule

32. NETGEAR CONFIDENTIAL Security – Logs and Emails

33. NETGEAR CONFIDENTIAL Security – View Log

34. NETGEAR CONFIDENTIAL Security – Logs and Emails When E-mail Logs and Syslog are enabled

35. NETGEAR CONFIDENTIAL VPN – VPN Wizard Box-to-box

36. NETGEAR CONFIDENTIAL VPN – VPN Wizard Box-to-box Result:

37. NETGEAR CONFIDENTIAL VPN – VPN Wizard Client-to-box

38. NETGEAR CONFIDENTIAL VPN – VPN Wizard Client-to-box

39. NETGEAR CONFIDENTIAL VPN – VPN Status

40. NETGEAR CONFIDENTIAL VPN – IKE Policies Update current WAN address

41. NETGEAR CONFIDENTIAL VPN – IKE Policies - Add

42. NETGEAR CONFIDENTIAL VPN – VPN Policies

43. NETGEAR CONFIDENTIAL VPN – VPN Policies – Add Auto Policy

44. NETGEAR CONFIDENTIAL VPN – VPN Policies – Add Manual Policy

45. NETGEAR CONFIDENTIAL VPN - CAs

46. NETGEAR CONFIDENTIAL VPN - Certificates

47. NETGEAR CONFIDENTIAL VPN - CRL

48. NETGEAR CONFIDENTIAL Maintenance – Router Status

49. NETGEAR CONFIDENTIAL Maintenance – Router Status Show Statistics

50. NETGEAR CONFIDENTIAL Maintenance – Set Password

51. NETGEAR CONFIDENTIAL Maintenance – Remote management

52. NETGEAR CONFIDENTIAL Maintenance - SNMP

53. NETGEAR CONFIDENTIAL Maintenance - Diagnostics

54. NETGEAR CONFIDENTIAL Maintenance – Backup Settings

55. NETGEAR CONFIDENTIAL Maintenance – Router Upgrade

56. NETGEAR CONFIDENTIAL Advanced – LAN Setup

57. NETGEAR CONFIDENTIAL Advanced – LAN Setups Multi-Home LAN IP Setups

58. NETGEAR CONFIDENTIAL Advanced – DMZ Setups

59. NETGEAR CONFIDENTIAL Port Triggering Once configured, operation is as follows: 1. A PC makes an outgoing connection using a port number defined in the Port Triggering table. 2. This Router records this connection, opens the INCOMING port or ports associated with this entry in the Port Triggering table, and associates them with the PC. 3. The remote system receives the PCs request, and responds using a different port number. 4. This Router matches the response to the previous request, and forwards the response to the PC. (Without Port Triggering, this response would be treated as a new connection request rather than a response. As such, it would be handled in accordance with the Port Forwarding rules.)

60. NETGEAR CONFIDENTIAL Port Triggering Note Only 1 PC can use a "Port Triggering" application at any time. After a PC has finished using a "Port Triggering" application, there is a "Time-out" period before the application can be used by another PC. This is required because this Router cannot be sure when the application has terminated. Normally for games and chat.

61. NETGEAR CONFIDENTIAL Advanced – Port Triggering

62. NETGEAR CONFIDENTIAL Advanced – Static Routes

63. NETGEAR CONFIDENTIAL Knowledge Base / Documentation

64. NETGEAR CONFIDENTIAL Troubleshooting

65. NETGEAR CONFIDENTIAL FAQ#1 How does the FVS338 support QoS? The FVS338 prioritizes the routing of a packet through the router according to the TOS bit in the packet’s layer3 header. For a particular service, you can override the packet’s specified priority by selecting a different priority in the Services menu, Inbound rules or Outbound Rules. Changing the priority setting will affect the priority given to the packet by the router, but will not actually alter the TOS bits in the packet.

66. NETGEAR CONFIDENTIAL FAQ#2 My ISP has provided me with a range of public IP addresses. How can I assign them to servers behind the FVS338? When you configure the ISP Settings of your router, assign one IP address as the WAN address to be used by your PCs as the main NAT address for general traffic. In the DMZ Setup menu, you can assign the additional public IP addresses to individual PCs on either your LAN or DMZ (if you have activated port 8 as your DMZ port). To allow inbound traffic to reach one of these PCs, you must create an Inbound Rule for the desired service and set the rule’s Destination Address to the public IP address assigned to that PC.

67. NETGEAR CONFIDENTIAL FAQ#3 Is the VPN policy created by the VPN Wizard compatible to other Netgear VPN routers? The VPN Wizard will create a compatible configuration with our other products when using fixed IP addresses. When using FQDN, some modifications will be necessary after running the wizard. Please refer to our VPN application notes for detailed information.

68. NETGEAR CONFIDENTIAL Known Issues Error messages for upgrading with the wrong image are not working. If user gets a message “Document contains no data”, this means that the image upgrade did not take place. Click on “Router Upgrade” menu to recover and try again. Show statistics in Router Status is causing HTTP hang after couple of auto refreshes. No NETBIO support over VPN tunnel until March. Recommend to use WINS server or LMHOSTS file.