1. BERCEN plenary meeting Sofia, March 18, 2005 Agenda item 8 Draft Scope and Proposed Location of BERCEN Training 2005 BERCEN Secretariat

2. Day 1 – IPPC Directive Integrated permitting Related environmental legislation Pilot permitting –Country experience –Challenges –Lessons learned and how to improve the process Drafting of permit application: guidance documents

3. Day 2 – Volatile Organic Solvents (VOC) Directive (1999/13/EC) Purpose: prevent and reduce VOC emissions; Scope: adhesive coating, other coatings, coil coating, dry cleaning, footware manufacturing, manufacturing of pharmaceutical products, printing, rubber conversion, surface cleaning, vehicle refinishing, winding wire coating, wood impregnation, wood and plastic lamination. Two options: compliance with ELV or with National Reduction Scheme (preventive approach) MSs have to submit to the European Commission national plans for reducing emissions Obligation for reporting to the EC every 3 years

4. Link to the IPPC Directive: From VOC Directive preamble: (11) Existing installations to be adapted so that they meet the requirements established for new installations and activities. That period should be consistent with the timetable for compliance of the IPPC Directive. (17) Possibilities exist for alternative and more efficient approaches to reduction: –national reduction plan

5. Link to the IPPC directive Annex 4, 6 Different activities involving solvent use VOC solvent directive Solvent use thresholds Reporting EPER - solvent management plan Emission limit values (application of BAT) Permitting procedure registration, authorisation

6. Suggested issues to be covered in relation to the VOC Solvents Directive Introduction to the VOC solvent directive (99/13/EC) and solvent management plans; General requirements for companies/inspectors; Elaboration of a solvent management plan based on company data. Use of a computer programme for drafting solvent management plans. Drafting of Reduction schemes. Monitoring and Inspection

7. Day 3 – Large Combustion Plants (LCP) Directive ( 2001/80/EC ) Purpose: reduction of CO2, NOx and SO2 emissions from LCP; Scope: combustion plants, the rated thermal input of which is equal to or greater than 50 MW, irrespective of the type of fuel used (solid, liquid or gaseous); energy producers for outside use. Licenses needed for the operation of LCPs. They should contain conditions relating to compliance with ELVs. Possibilities for implementation of national emission reduction plan.

8. Link to the IPPC directive From LCP Directive preamble: LCP installations are also covered by the IPPC Directive. Therefore LCP Installations are included in the IPPC inventory of emission sources published by the EC. Compliance with the BAT requirements of the IPPC Directive (ELV laid down by the LCP Directive apply as a minimum: art. 18 IPPC) Negotiation process on permit conditions

9. Suggested issues to be covered in relation to the LCP Directive Introduction to the LCP Directive Transposition and implementation of the LCP Directive in the New Member States: challenges and lessons learned LCP permitting Enforcement LCP in light of LCP Directive

10. Suggestions for Site Visits 1 LCP/IPPC installation – one of the thermal Power Plant in Kakanj, Tuzla, Gacko or Ugljevik 1 VOC installation 1 Waste Incinerator / Waste Landfill ?

11. Alternative topics Environmental Impact Assessment (97/11/EC) Waste Landfill Directive (1999/31/EC) Waste Incineration Directive (2000/76/EC)

12. Suggested time and location Suggested time options: A 3-day training - May 11-13 or May 18-20, 2005 Suggested location: Sarajevo, Bosnia and Herzegovina