1. www.planet.com.tw ICF-1600 P2P Configuration Internet Video Conferencing Phone Copyright © PLANET Technology Corporation. All rights reserved.

2. www.planet.com.tw ICF-1600 P2P Configuration FAQ: How to setup P2P mode in ICF-1600? Please refer to the following descriptions and insert proper parameters configurations into the device for establish the voice communications. Note: You can also directly connect two ICF-1600 together via connecting the Ethernet port.

3. www.planet.com.tw ICF-1600[A] ICF-1600[B] ICF-1600[A] / ICF-1600[B] IP Address : 10.1.1.1 10.1.1.2 IP Address : 10.1.1.1 / 10.1.1.2 Subnet Mask : 255.255.255.0 Default IP gateway Address : 10.1.1.254 After confirmed whole settings please to click the Apply button to take effective. 1 2 Select the [ Basic Settings > LAN Configuration ] to setup the IP address for the video phone. ICF-1600[A] ICF-1600[B] ICF-1600 P2P Configuration

4. www.planet.com.tw 3 4 Select the [ Basic Settings > SIP Configuration ] to setup the phone number for the video phone. ICF-1600[A] / ICF-1600[B] Phone No. : 10 20 Phone No. : 10 / 20 After confirmed whole settings please to click the Apply button to take effective. ICF-1600 P2P Configuration The SIP Registration Server must have an IP address inside even in P2P mode. Just enter an IP like 10.0.0.1 will do. Not doing this will have unexpected result in P2P mode.

5. www.planet.com.tw 5 Select the [ Advance Settings > SIP Settings ] to setup the SIP Settings, it doesn’t need to setup the Proxy Server IP when using P2P mode 6 ICF-1600[A] / ICF-1600[B] SIP Proxy Server: None After confirmed whole settings please to click the Apply button to take effective. ICF-1600 P2P Configuration

6. www.planet.com.tw 7 Select the [ Advance Settings > System Settings ] to setup the SIP Settings, it doesn’t need to setup the Proxy Server IP when using P2P mode ICF-1600[A] / ICF-1600[B] Voice Codec Setting: MPEG4 Only After confirmed whole settings please to click the Apply button to take effective. 8 ICF-1600 P2P Configuration

7. www.planet.com.tw ICF-1600 P2P Configuration Dial Out 10*1*1*2*20 to call to ICF-1600[A] press 10*1*1*2*20 to call to ICF-1600[B] 10*1*1*1*10 ICF-1600[B] press 10*1*1*1*10 to call to ICF-1600[A]

8. www.planet.com.tw Ports Required for ICF-1600 under NAT router Ports required to open in NAT router UDP : 5060 UDP : 22000 - 30000 Ports required to open in NAT router UDP : 5060 UDP : 22000 - 30000 Dial ICF-1600@1 --------- > ICF-1600@2: 210*66*155*75*2 ICF-1600@2 --------- > ICF-1600@1: 210*66*155*74*1