Presentation is loading. Please wait.

Presentation is loading. Please wait.

UPnP Working Group Home Automation & Security 13 November 2003 - Status - Hans J. Langels Working Group Chair Siemens AG.

Similar presentations


Presentation on theme: "UPnP Working Group Home Automation & Security 13 November 2003 - Status - Hans J. Langels Working Group Chair Siemens AG."— Presentation transcript:

1 UPnP Working Group Home Automation & Security 13 November 2003 - Status - Hans J. Langels Working Group Chair Siemens AG

2 Home Automation & Security DCP definitions finalized The Home Automation & Security working committee has defined DCPs for these application areas.  Lighting  HVAC  Digital (Security) Camera  Blinds / Shutter / Motor Control  Power System  Security System

3 Generic Services Template Design Complete  ExtendedDeviceInformation  Name/Value pairs  Get/SetParameter action  HouseStatus  OccupanceState, ActivityLevel, DormancyLevel Useful Services for any UPnP device Call for Sample Implementers!

4 HVAC Approved as standard DCP Complete set of standards for heating system:  Temperature sensors  Temperature setpoints  Valve & fan control  Operation modes  Schedule setupDevice(s) HVAC_System HVAC_ZoneThermostatService(s) HVAC_UserOperatingMode HVAC_FanOperatingMode FanSpeed TemperatureSensor HVAC_SetpointSchedule ControlValve TemperatureSetpoint

5 Lighting Approved as standard DCP Binary Light  Simple switch (on/off) Dimmable Light  Switch and  Dimming (up/down, value, rampTo,...)Device(s) BinaryLight DimmableLightService(s) SwitchPower Dimming

6 Digital (Security) Camera Next steps:  SC approval, then approved as standard Settings  Saturation, Brightness, WhiteBlance, Rotation Still Image  GetURL and specify encodings, compression, resolution Motion Image  Still Image + framerate and bandwidth settingsDevice(s) DigitalSecurityCameraService(s) DigitalSecurityCameraSettings DigitalSecurityCameraStillImage DigitalSecurityCameraMotionImage

7 Shutter / Blind / Motor Control Template design complete Two-Way-Motion-Motor  TurnCW, TurnCCW  Aliases: Open, Close, Up, Down, Left, Right  Get/SetPosition, Stop, Lock Looking now for Sample Implementers! Next step: follow standardization processDevice(s) SolarProtectionBlindService(s) TwoWayMotionMotor

8 Power System Template design complete Sample implementation was pending because UPnP Security services are required for Power System devices and services (e.g. PowerMeter). Looking now for Sample Implementers!Device(s) PowerSystem PowerSource PowerSink PowerConverter PowerStorage UPS DeviceService(s) PowerMeter ProgrammableTimer GenericPowerStorage GenericPowerConverter BasicPowerSummary PredictivePowerSummary PowerFlow PowerSocket Battery Charger

9 Security and Access Control System Template design complete Sample implementation was pending because UPnP Security services are required. Looking now for sample implementers!Device(s) SecurityAccessControlService(s) Relay EventLog Display Partition BooleanSensor PINPad Reader

10 Next steps  Lighting Control  Publish Standard DCP  Digital (Security) Camera  SC vote  Blinds, Motor Control / Security System / Power System  Follow standardization process (sample implementations, test tool pass, 45-day review, SC vote)

11 For the interconnected lifestyle


Download ppt "UPnP Working Group Home Automation & Security 13 November 2003 - Status - Hans J. Langels Working Group Chair Siemens AG."

Similar presentations


Ads by Google