1. Home Automation & Security Update Markus Wischy Senior Architect Siemens

2. PC A/V Phone User friendly control of all Home Controls and Appliances via existing interfaces of Home Entertainment and Information technology components. Home Automation & Security The Vision

3. Home Automation & Security Executive Summary The Home Automation & Security working committee has defined DCPs for these application areas. HVAC UPnP DCP Standard Lighting UPnP DCP Standard Digital (Security) Camera 45-day review done Blinds / Shutter / Motor Control Sample implementations Power System Sample implementations Security System Sample implementations

4. HVAC Approved as standard DCP Complete set of standards for heating system: Temperature sensors Temperature setpoints Valve & fan control Operation modes Schedule setup Device(s) HVAC_System HVAC_ZoneThermostatService(s) HVAC_UserOperatingMode HVAC_FanOperatingMode FanSpeed TemperatureSensor HVAC_SetpointSchedule ControlValve TemperatureSetpoint

5. Lighting Approved as standard DCP Binary Light Simple switch (on/off) Dimmable Light Switch and Dimming (value, up/down, rampTo,...) Device(s) BinaryLight DimmableLightService(s) SwitchPower Dimming

6. Digital (Security) Camera Next steps: SC approval, then approved as standard Settings Saturation, Brightness, WhiteBlance, Rotation Still Image GetURL and specify encodings, compression, resolution Motion Image Still Image + framerate and bandwidth settings Device(s) DigitalSecurityCameraService(s) DigitalSecurityCameraSettings DigitalSecurityCameraStillImage DigitalSecurityCameraMotionImage

7. Shutter / Blind / Motor Control Template design complete Two-Way-Motion-Motor TurnCW, TurnCCW Aliases: Open, Close, Up, Down, Left, Right Get/SetPosition, Stop, Lock Looking now for Sample Implementers! Device(s) SolarProtectionBlindService(s) TwoWayMotionMotor

8. Power System Template design complete Sample implementation was pending because UPnP Security services are required for Power System devices and services (e.g. PowerMeter). Looking now for Sample Implementers! Device(s) PowerSystem PowerSource PowerSink PowerConverter PowerStorage UPS DeviceService(s) PowerMeter ProgrammableTimer GenericPowerStorage GenericPowerConverter BasicPowerSummary PredictivePowerSummary PowerFlow PowerSocket Battery Charger

9. Security and Access Control System Template design complete Sample implementation was pending because UPnP Security services are required. Looking now for sample implementers! Device(s) SecurityAccessControlService(s) Relay EventLog Display Partition BooleanSensor PINPad Reader

10. Generic Services Template Design Complete ExtendedDeviceInformation Name/Value pairs Name/Value pairs Get/SetParameter action Get/SetParameter action HouseStatus OccupanceState, ActivityLevel, DormancyLevel OccupanceState, ActivityLevel, DormancyLevel Useful Services for any UPnP device Call for Sample Implementers!

11. Next steps Digital (Security) Camera SC vote Blinds, Motor Control / Security System / Power System Follow standardization process (sample implementations, test tool pass, 45-day review, SC vote)

12. Contact For further infomation, please contact Mr. Hans-Joachim Langels (hans-joachim.langels@siemens.com)

13. Foundation of the Connected Home