1. Communication Markets Division © 3M 2007. All Rights Reserved. 965AMS Product Overview

2. 2 Communication Markets Division © 3M 2007. All Rights Reserved. Outline  New Out-of-Box  965 Versions  Test Set Features  Operating the 965AMS  Capacitive Faults  Resistive Faults  Auto Tests  Fault Locating  RFL  TDR

3. 3 Communication Markets Division © 3M 2007. All Rights Reserved. New Out of the Box  965AMS  Carrying Case  Battery Pack  Spare Battery Holder  Test Leads  Self Test Simulator  Shorting Strap  AC/DC Adapter  Power Cord  Vehicle Charger  USB Cord  Serial Adapter  Warranty Card  Instruction Manual

4. 4 Communication Markets Division © 3M 2007. All Rights Reserved. Volts: Press DC or AC. 965AMS Functions Selects T-R or R-G or T-G. Resistance: Press for Soak Test. Opens: Press for Setup. Loop Current: Ground Resistance. Tone: ID Tone (200 Hz to 1kHz, Precision (200 Hz to 19,999 Hz) and Wideband (20 kHz to 2.2 MHz). Autotest: Active Pots, Vacant Pots, Vacant Wideband. DSL Menu: DSL Loss, DSL Noise, DSL Spectrum Analyzer, Resistance Balance and Impulse Noise. POTS Menu: Loss, Noise, Longitudinal Balance, Load Coils, Caller ID, Ringers, Level Trace, Kick Test and Voiceband SA. Module: Accesses the attached module. Dial Key: Allows 965AMS to be used as a Buttset or send DTMF commands to a FED. Resistive Fault Locator: Measure shorts, grounds and crosses with single pair or separate pair connections. Toolbox: Stored results, Self Calibrate, Ohms/distance, Internet Explorer, Upload to PC LINK, 3M Use and Available Options. TDR: Single Trace, Dual Trace, Peak, Crosstalk, Differential, TDR Memory, Memory Diff and Live Diff.

5. 5 Communication Markets Division © 3M 2007. All Rights Reserved. Setup  The welcome screen displays the:  Serial 0537003T  Version 4.00.01  The bottom of the screen will indicate any function keys that are available. 4.00.01

6. 6 Communication Markets Division © 3M 2007. All Rights Reserved. Operating the 965AMS Clip Colors Function Name Function Soft Keys Result E 1/2 F Battery Status Battery Life 8 Hours Continuous Use Charging Time Typically 4 Hours

7. 7 Communication Markets Division © 3M 2007. All Rights Reserved. Turning the unit On/Off Press the red key to power up the unit or power down the unit There are two ways to power down the unit. 1.Sleep mode – Quickly press and release the red key. This is normal daily use. 2.Cold Boot – Hold the red key down for ten seconds and then release. Use this mode when the unit will not be used for an extended amount of time.

8. 8 Communication Markets Division © 3M 2007. All Rights Reserved. Contrast

9. 9 Communication Markets Division © 3M 2007. All Rights Reserved. Setup  Setup allows you to change a variety of settings.  Use the up or down key to navigate and then press the F4 or F5 key to change. Country Language Module Network Setup Units User Info Clock Settings Set Beep Volume Power Down Timeout Edit Custom Cable Voltage Termination Clock Settings

10. 10 Communication Markets Division © 3M 2007. All Rights Reserved. Clock Settings