1. SUPERACRYL PLUS DURACRYL PLUS
Cross-linked denture base resins
PRODUCT PRESENTATION

2. Heat-curing cross-linked denture base resin
SUPERACRYL PLUS
Heat-curing cross-linked denture base resin
I N D I C A T I O N S:
Bases of complete dentures
Bases of partial dentures
Indirect rebasing
Manufacturing of orthodontic appliances

3. SUPERACRYL PLUS A D V A N T A G E S Reduced risk of breakage
High precision, excellent fit
Easily finished and polished
Different types of polymerization
Available in wide range of colours
Conforms to ISO 1567:2000

4. SUPERACRYL PLUS Properties
HIGH FLEXURAL STRENGTH I GH
STRENGTH
SUPERACRYL PLUS
Product 1
Product 2
ISO 1567:2000
Reduced risk of breakage of denture

5. SUPERACRYL PLUS Properties
LOW WATER SORPTION O W S R P T I N
SUPERACRYL PLUS
Product 1
Product 2
ISO 1567:2000
Colour stability of dentures

6. SUPERACRYL PLUS Properties
LOW WATER SOLUBILITY O W SO L U B I
T Y
SUPERACRYL PLUS
Product 1
Product 2
ISO 1567:2000
Stability of properties – mechanical and visual

7. SUPERACRYL PLUS Properties
High dimensional stability
High precision of dentures and excellent fit
High color stability
Denture does not change its colour in time
Very good adhesion to acrylic teeth
Low risk for teeth to fall out of the denture

8. SUPERACRYL PLUS Natural aesthetics of gingival
margin and interdental papilae

9. SUPERACRYL PLUS WORKING TIMES Dough time: 12 – 16 min
Plasticity interval: cca 10 min
Total working time: 25 min

10. SUPERACRYL PLUS Polymerization
STANDARD POLYMERIZATION:
Dip the cuvette in cold water
Heat to 70 °C within 30 minutes
Maintain the temperature for another 30 minutes
Increase the temperature to 100 °C within 30 minutes.
Maintain the temperature for another 30 minutes.
The total polymerization time is 2 hours.

11. SUPERACRYL PLUS Polymerization
ACCELERATED POLYMERIZATION
Place the cuvette in cold water.
Heat to 100 °C.
Maintain the temperature for 45 minutes.
QUICK-BOILING POLYMERIZATION
Suitable only for partial dentures of up to 4 teeth.
Place the cuvette in boiling water (100 °C).
Maintain the temperature for 40 minutes.

12. SUPERACRYL PLUS Polymerization
POLYMERIZATION IN PRESSURE POLYMERIZATOR:
Polymerization directly on the model, without cuvette.
Suitable only for smaller partial dentures and denture repairs.
Pressure: 0,6 MPa
Temperature: 100 – 110 °C
Time: – 15 minutes

13. Self-curing cross-linked denture base resin
DURACRYL PLUS
Self-curing cross-linked denture base resin
I N D I C A T I O N S:
REPAIRS OF DENTURES
EXTENSIONS OF DENTURES
MANUFACTURING OF IMMEDIATE DENTURES

14. DURACRYL PLUS A D V A N T A G E S Easy preparation and workability
Convenient manipulation time
Easily finished and polished
Matches shades of SUPERACRYL® PLUS
Conforms to ISO 1567:2000

15. DURACRYL PLUS Properties
HIGH FLEXURAL STRENGTH I GH
STRENGTH
DURACRYL PLUS
Product 1
Product 2
ISO 1567:2000

16. DURACRYL PLUS Properties
LOW WATER SORPTION O W S R P T I N
DURACRYL PLUS
Product 1
Product 2
ISO 1567:2000

17. DURACRYL PLUS Properties
LOW WATER SOLUBILITY O W SO L U B I
T Y
DURACRYL PLUS
Product 1
Product 2
ISO 1567:2000

18. DURACRYL PLUS Properties
High strength bonding to denture base polymers
High strength of repaired denture, minimizes risk of repeated breakage in the same place
High color stability
The repaired part is not visible and does not change its colour in time

19. DURACRYL PLUS WORKING TIMES Dough time: 2 – 4 min
Manipulation time: 3 – 5 min
Total working time: 7 min

20. SUPERACRYL PLUS DURACRYL PLUS
PACKAGING
Liquid 250 g
Powder 500 g
Measuring devices

21. Available shades SUPERACRYL PLUS DURACRYL PLUS O – transparent
X – with fibers
U, V, Z
DURACRYL PLUS
O - transparent
U, V, Z