1. Spring Lake, Michigan

2. Fume Hoods
CA Style Fume Hood
ADA Style Fume Hood
WI Style Fume Hood

3. Testing Requirements:
UL 1805
ASHRAE 110
Functional test on all fume hoods

4. 5 F Quality Inspection
Finish
Fit
Function
Required features
Check off loose parts
Check for proper fit
Traveler of material data can also be provided if required
TQM
Continuous improvement internally and externally from customer input.
Operate sash and all other movable controls for smooth operation

5. Basic Design Structure:
Inner frame supports hoods interior liner and outer steel body.
Post fronts and side panels are keyed together for reduced hardware and assembly time.
Frame consists of 5 parts total.
Frame ends are a formed universal one piece unit.
Most hoods use a vertical sliding counterbalance weight for the sash.

6. Materials:
Steel – Carbon steel with a receives chemical resistant powder coated finish or stainless steel
Preparation – Carbon steel go through a phosphate wash and receive a bonderizer prior receiving the powder coating.
Stainless steel preparation includes grinding, buffing, and polishing of parts.
For finishes see color charts and for stainless steel we supply a number 4 finish

7. Standard models:
ADA Fume hoods
CA Control Air Fume Hoods “Airfoil Type Hood”
WI Walk-in Fume Hoods
P Perchloric Fume Hood
RI Radio Isotopes Fume Hood
FF Flat Fume Hood
SSH Single Sided Fume Hood
Demonstrator Demonstration Type Fume Hood
LFH Low Flow Fume Hood
MFH Modular Fume Hood

8. We can provide a Customized Design

9. Custom crating Shipping And Packaging:
Standard packaging includes corner protection and plastic wrap along with blocking wood for the sash.

10. A Few Of Our Markets Include:
Food Laboratories
Hospital Laboratories
Chemical Laboratories
Bio-Medical Laboratories
Environmental Laboratories
Research & Development Laboratories

11. A Commitment to Quality and Excellence,
From Start . . .
. . . To Finish

12. Call us Anytime - or visit online At http://www.keurindustries.com