1. EnSaFA ® The picture to the left is a cut-away of a test with an Acetylene torch that reaches temperatures of between 6700-6800 degrees Fahrenheit. A picture is worth a thousand words! During the test AC electricity was flowing constantly through the 2” conduit pipe. The temp remained constant along the ten foot of pipe [except the middle] showing the absorption of heat by the EnSaFA® fireproofing material, preventing a burn through. Environmentally Safe Fire Absorbent For Fireproofing Residential And Commercial Structures

2. Easy Installation Of The Fireproofed Panels Shipped Direct To The Building Site From The Licensed Manufacturer  NOTE the interior wall joint showing the middle of the wall joint is where the 4' by 8' wall panel would join [see Provisional Patent Pend. #61,139,307 that shows more detail].  The inventor of these fireproofed products; Earl Wayne Fowler will send you a copy of the patent upon request when mutual Non-disclosures are signed.  The only change in construction to  accommodate the exterior panels is a flat 2X4 stud placed in the center of the wall joint.

4. beat

5. 21 st Century Technology Through Use Patent Licensing Now Available To You To Prevent THIS From Ever Happening Again  Can you imagine technology that would have safely prevented the WTC  buildings on September 11, 2001 from  imploding and killing and injuring so many people that fateful day?  These buildings and residential  structures DO NOT have to be death traps any longer. They now can have continuous safe AC power to make “Safe Rooms” and elevator evacuation possible.  The steel girders in the WTC type buildings can now be protected by fireproofing that will not allow the JP-8 fuel you see burning here to soften the steel girders causing the implosion on 9-11.  You can only imagine how safe you can now make homes from fire with  EnSaFA® Products.

6. In 2006 Over 2,500 Americans Were Killed In A Residential Fire  The photo [right side] shows where many residential fires start which is the garage.  With EnSaFA® Fireproofed Wall Panels,Roofing Panels,  Attic Panels, and Fireproofed  Doors the Fire would have been contained in the garage so the occupants could have a safer way to evacuate the house.  These Fireproofed doors and panels are UL Listed and meet or beat all Local, State, and Federal fire codes.

7. Long-term Goal  To License to qualified manufacturers the rights to manufacture and distribute this new environmentally safe fireproofing material to make residential and commercial structures safe from fire and property damage. This safe organic product can be grown and manufactured throughout the world to reduce hunger, create a safe technology to save lives and property, which would reduce casualty insurance rates and  energy costs.  To furnish qualified engineers and fire technicians through Fowlermite ® Licensing Agencies to the  Licensee to help in the manufacturing setup.

8. Customer Wishes  These products puts the “custom” back into the customer. As a licensed manufacturer you put the customer in the drivers seat as to what they want regarding fire safety, comfort, energy  savings, and peace of mind.  These 21 st Century products can be obtained from your manufacturing plants and/or bought through the home improvement outlets such as Lowe's and Home Depot.  For the “Do It Yourself Person” these products are so easy to install and gives the customer another savings potential. 

9. Fulfilling Customer Needs  The fireproofing material sealed in these doors, walls, ceilings, attics, and roofing panels is made from  patented formulated pinto beans and sodium lauryl sulfate giving the home or commercial property  owner a safe way to protect lives and property.  The product is so safe it can be eaten without harm to the human body. Another formulation of these safe products gives it the ability to extinguish Class ABC & D Fires.  Not only will these products make you safer, they will “improve” the value of your asset.

10. Cost Analysis  Every dollar spent on fireproofing, insulating, weatherproofing, and safety returns at least two dollars in property value.  Currently we are using clay in our fire doors with only measured amount of time before fire will burn through to other parts of the structure.  NOW we can completely control the time of  evacuation by containing fire in each room of the structure and provide a “safe room” to be rescued from if necessary and that is PRICELESS!

11. Strengths and Advantages  Fireproofing material is environmentally safe and “green”.  Will lower the cost of insurance, energy, and  maintenance costs of structures.  Save lives and protect property.  Only licensed manufacturers will be able to produce the fireproofing products.  Available qualified help in setting up  manufacturing through the inventor.  Negotiable license agreements to insure the  success of all parties involved.  The only “one of a kind” fireproofing material like it  in the world!

12. Next Steps of Action  Contact the inventor Earl Wayne Fowler with any questions @ 505-254-2845 or email SargeFowler@aol.comSargeFowler@aol.com  Sign mutual non-disclosure agreements  Ask inventor about other patents  involving this technology if interested.  If you as a manufacturer are interested in doing manufacturing outside the USA  with this technology please advise.