1. Cold Chain Solutions

2. ShockWatch Cold Chain Solutions
Increasing Value to Customer
Intelligent Monitoring System
TrekView
ColdMark2
WarmMark2
Real-time Monitoring
Performance
Multi-use recorder
Single use
Low cost
Go – No/Go
Data Recorders
ColdMark
WarmMark
Chemical Indicators
Price

3. WarmMark®2 and ColdMark®2 Temperature Indicators

4. WarmMark2 & ColdMark2
Single-use, single temperature threshold indicators
Field-armable
Easy-to-read with a definitive color change
Accurate & affordable
Identifies out-of-tolerance temperature conditions

5. WarmMark2 Features
Best-in-class ascending time-temperature indicator which alerts users of exposure to unacceptable temperature conditions and the cumulative amount of time of the exposure.
1. Field-armable with button push 2. Temperature sensitivity 3. Unique identifiers for enhanced shipment tracking 4. Shows “ON” to indicate the device is armed 5. Blue appears at exposure times 6. Part number

6. WarmMark2 Features Easy to Read and Use Accuracy
Field-armable
The word ON appears when device armed
Traceability
Unique identifiers assist tracking
Product is lot-traceable
Accuracy
Temperature accuracy of +1°C
No false activations from human handling
Quality
Certificate of conformance with every shipment
Heat-sealed to prevent bleeding
Tamperproof
Release documents available upon request

7. Standard WarmMark2 Sensitivities*
Blister on Top (BOT) – Armed from the front of device. Allows smaller increments of time/temp exposure to be shown.
Blister on Bottom (BOB) – Armed from the back of device. Allows for longer run-out times.
*Based on isothermal temperature of 2°C above threshold temperature. Higher temperature exposure will speed run-out

8. How WarmMark2 Works Inactive: liquid in blister before arming
Armed: blister squeezed, RED in arming window confirms product is armed
Breach: after exposure to temperatures over the threshold temperature, blue dye will appear in the breach window for the time specified

9. ColdMark2 Features
1. Field-armable with button push 2. Unique identifier for enhanced shipment tracking 3. Indicates the device is armed 4. Turns red when exposed past threshold 5. Temperature sensitivity 6. Part number

10. ColdMark2 Features Easy to Read and Use Accuracy
Field armable - requires no special packaging or overnight shipping
Window on device shows it has been armed
Traceability
Unique identifiers assist tracking
Product is lot-traceable
Accuracy
Temperature accuracy of +1°C
Accurate response time
Quality
Certificate of conformance with every shipment
Tamperproof
Release documents available upon request

11. Available ColdMark2 Sensitivities
Temperature Thresholds
Activation Time
0°C / 32°F
60 minutes or less
1.5°C / 35°F
30 minutes or less

12. How ColdMark2 Works Inactive: liquid in blister before arming
Armed: blister squeezed, RED in arming window confirms product is armed
Breach: after exposure to temperatures below the threshold temperature, red dye will appear in the breach window

13. WarmMark and ColdMark Temperature Indicators

14. WarmMark & ColdMark Single-use temperature threshold indicators
Identify out-of-tolerance temperature conditions
Accurate & affordable
WarmMark Short-Run
WarmMark Long-Run
ColdMark
WarmMark Duo

15. WarmMark Overview
Ascending time-temperature indicator alerts users of exposure to unacceptably high temperature conditions and the cumulative amount of time of the exposure. 1 3
1. Field-armable with pull tab 2. Temperature sensitivity 3. Black stripes show product armed 4. Breach windows turn red when exposure above the activation temperature occurs 4 2
WarmMark Short-Run 3 2 2 3 2
WarmMark Long-Run
WarmMark Duo

16. WarmMark Short-Run Run Out Time Window 1 Window 2 Window 3 -18oC / 0oF
Ascending time-temperature indicator which alerts users of exposure to unacceptable temperature conditions and the cumulative amount of time of the exposure up to 8, 12, or 48 hours depending on the temperature sensitivity.
WarmMarkTM SR
Response Temp
Run Out Time
Window 1
Window 2
Window 3
-18oC / 0oF
2 hours
3 hours
12 hours
0oC / 32oF
48 hours
5oC / 41oF
30 minutes
8 hours
8oC / 46oF
10oC / 50oF
20oC / 68oF
25oC / 77oF
30oC /86oF
37oC / 99oF
Note: Run-out times are based on a 2oC excursion above the response temperature. Readings are affected by severity of temperature excursion. Higher temperatures will cause run-out to occur faster than stated.

17. WarmMark Long-Run Run Out Time 10oC / 50oF 31oC / 88oF Line 1 12 hours
Ascending time-temperature indicator which alerts users of exposure to unacceptable temperature conditions and the cumulative amount of time of the exposure up to 7 days.
WarmMarkTM LR
Response Temp
Run Out Time
10oC / 50oF
31oC / 88oF
Line 1
12 hours
Line 2
30 hours
Line 3
60 hours
(2.5 days)
Line 4
110 hours
Line 5
168 hours
(7 days)
(7 Days)
Note: Run-out times are based on a 2oC excursion above the response temperature. Readings are affected by severity of temperature excursion. Higher temperatures will cause run-out to occur faster than stated.

18. WarmMark Duo Run Out Time 10oC / 50oF 34oC / 93oF Window 1 3 days
Indicates the duration of temperature exposure at two different activation temperature levels. Monitor for longer excursions above 10°C and for brief excursions above 34°C
WarmMarkTM Duo
Response Temp
Run Out Time
10oC / 50oF
34oC / 93oF
Window 1
3 days
-----
Window 2
8 days
Window 3
14 days
Window 4
Within 30 minutes
Note: Run-out times are based on a 2oC excursion above the response temperature. Readings are affected by severity of temperature excursion. Higher temperatures will cause run-out to occur faster than stated.

19. ColdMark Overview
Descending, single-use temperature indicator that provides accurate, irreversible evidence of a below-temperature deviation
Turns from clear to violet when the temperature goes below a predetermined threshold
Activated

20. ColdMark Sensitivities
ColdMark is available for the following activation temperatures:
-3°C/26°F
0°C/32°F
2°C/36°F
5°C/41°F
10°C/50°F

21. TrekView ® Temperature Recorders

22. TrekView Temperature Recorder
Download data in a few seconds
Connectivity: RF plus USB
Activate tags, check temperatures without opening the package
Visual indication of high / low temperature excursions for quick go / no-go decisions
Footprint: size of a matchbook (minimizes package design considerations)
Reusable for up to 26 on/off cycles
Optional integrated probes for application-specific monitoring
Optional handheld or desktop reader
Unique Tag
ID Number
On/Off Button
Status
Button
Low Excursion
Display Window
Active Display Window
High Excursion
Display Window
* RF signals cannot read through metal packaging
** For handheld reader

23. TrekView USB External or internal USB options
Provides access to temperature data without readers
Fast data downloads using universal USB port on any PC
Use this picture

24. TrekView Probe Units Stainless steel probe Ribbon probe
Monitors core temperatures
Ideal for food products
Ribbon probe
Used in validated pharmaceutical packaging
Ideal for containers with metal components or large containers

25. TrekView DMS Overview
Web-based application that assists in monitoring your cold chain
24/7 access to data from any internet-enabled device
No software to install and little or no IT involvement required
Analyze supply chain performance, create reports, and identify problem areas
Simple menu structure for easy setup and configuration of recorders

26. TrekView DMS Overview
Configure the TrekView temperature recorder settings in the easy-to-use TrekView Interface Application, and it is ready for use
When shipment has reached the end of its journey, the TrekView recorder can be scanned in a matter of seconds and uploaded
Detailed reports can be generated, but access to the information can be limited, ensuring that the information is seen by only those who need it

27. Security & Compliance FDA 21 CFR part 11 compliant, fully validated
Data housed at a Tier 3 data center
Password-protected
User access levels limited by assigned roles

28. TrekView Desktop Software
Intuitive interface for simplified tag configuration
At-a-glance graphs and charts
Detailed, customizable reports
Quick identification of out of tolerance conditions

29. TrekView Readers Handheld Desktop Download data in seconds
Open loop – USB
Closed loop – reader, reader enables speed
Handheld
Desktop
Download data in seconds
No optical lens to clean or pins to align on readers

30. Target Where to Scan
Mount the TrekView target label to match the location of the data recorders
TrekView
TrekView
Scan here

31. Remote Monitoring Facilities and In Transport

32. Remote Monitoring
Wireless temperature and humidity sensors for real-time monitoring in storage and in-transit
Environmental data is collected from each sensor
Data is transmitted to a centralized data repository
Multiple frequencies available – WiFi, 900 MHz, 418 MHz

33. Portal – Reports

34. Portal – Graph

35. Portal – Transport

36. ShockWatch Cold Chain Services

37. Cold Chain Services Cold Chain Services Temperature Mapping
Product Calibration
Gap Analysis
Cold
Chain
Services
Shipping Studies
Validation
Services
Services – goal is to become more consultative in the sales approach. Hardware sales follows when you have the confidence of the customer
Package Design

38. For additional information email info@shockwatch. com or visit www
For additional information or visit