1. 1 Product Line Review

2. 2

3. 3 RS Series  UV & UV / WBIR  Alarm Relay  Analog  Safe Area use only  Fire Sentry still sells a lot of these!

4. 4 UV only RS-0010 RS-0010(B) 9 volt battery 12-24 VDC built-in horn non-latching relay NO or NC contacts UV only RS2-0010 FS2-0010(B) 12-24 VDC latching relay NO or NC contacts UV/VIS/WBIR RS2D-00098 FS2DCR-00098 12-24 VDC latching relay non-latching relay form C contacts RS Series

5. 5 Model SS2  UV / WBIR / VIS  Explosion Proof - Indoor & Outdoor use  Internal Self-Test  FirePic™  Alarm & Fault Relays  FireBus™ RS485  Use Unitized or with CM1-A Controller  Versions for specialty applications requiring high speed response, such as Airbag and Munitions manufacturing

6. 6 24 VDC (1)FAULT RELAY– NO/NC Normally Energized (1)FIRE ALARM Relay – NO/NC Normally De- Energized Model SS2 (Unitized Mode) Note: Sensitivity Setting: 60 feet Electronics Self Test Only RS-485 FireBus™ Protocol to PC

7. 7 Model SS3  Safe Area use  UV & UV / WBIR / VIS  FirePic™  Alarm Relay  FireBus™ RS485  Use Unitized or with CM1-A Controller

8. 8  Silane Gas Cabinets  Clean Rooms  Warehouses  Computer Rooms Model SS3 PRODUCT APPLICATIONS Note: NEMA 1 Enclosure (Use only in Non-Hazardous Areas)

9. 9 Model SS4  UV & UV / WBIR / VIS  Explosion Proof - Indoor & Outdoor use  Optical and Internal Self-Test  FirePic™  Alarm, Verified Fire & Fault Relays  FireBus RS485  Use Unitized or with CM1-A Controller  Optimized version for Hydrogen, Natural Gas, Methanol & Ethanol Fires

10. 10  Petrochemical Plants  Refineries  Petroleum Product Pipelines  Gas Processing Plants  Offshore Drilling and Production Platforms  Gas Compressor Buildings  Petroleum Prod. Pumping Stations  Product Storage Terminals  Crude & Product Tank Farms  Gas Turbine Enclosures  Gas Collection Facilities  Marine Terminals  Rail Loading & Unloading Terminals  Gasoline Loading Terminals  LNG & LPG Storage and Distribution  Silane Gas Cabinets  Silane Gas Storage  Aircraft Hangars, Commercial and Military  Power Plants  Paints & Solvents Storage  Aerosol Filling Facilities  Cogeneration Plants  Warehouses  Engine Test Cells  Marine Engine Rooms Model SS2 & SS4 PRODUCT APPLICATIONS

11. 11 24 VDC (1)FAULT RELAY– NO/NC Normally Energized (1)FIRE ALARM Relay – NO/NC Normally De- Energized (1)FIRE VERIFY RELAY – NO/NC Normally De-Energized RS-485 FireBus™ Protocol to PC Model SS4 (Unitized Mode) Note: Factory Sensitivity Setting: 45 feet, (selectable 60, 30 and 15 feet) Through the Lens & Electronics Self Test

12. 12 Up to 30 Devices in the Loop (4) PROGRAMMABLE ZONE ALARM RELAYS- NO/NC Normally De-Energized (1) MASTER ALARM RELAY - NO/NC Normally De-Energized (1) FAULT RELAY - NO/NC Normally Energized FS2000 SYSTEM SS2-A SS4-A SS2-A SS3-A FireBus™ Protocol RS-485 4 Wire Loop CM1-A Controller 120 VAC RS-232 PC Communication

13. 13 Model FS7  The World’s largest selling Fire Detector for Semiconductor Wet Benches!  NIR / WBIR / VIS  Two Stage Alarm  FM Approved  Leak-proof, Polypropylene Housing  Unitized or Controller based versions  Six FirePics™  FireBus II ™ RS485

14. 14  Clean Rooms  Wet Bench Working Surfaces  Clean Room Pump & Equipment Area  Wet Bench Plenum Area  IPA & Chemical Stations Model FS7 System PRODUCT APPLICATIONS

15. 15 Equipment Area behind Wet Bench Robot Wafer Load and Unload Area Plenum Area under Process Tanks Surface Area detection, including robot deck area across Process Tanks Head Case Typical Location of Detectors

16. 16 24 VDC To Next Junction Box Junction Box (1)FAULT Relay – NC Normally Energized (4) Programmable Zone Alarms NC – Normally De-Energized Zone 1 - ALARM or ALERT Zone 2 - ALARM or ALERT Zone 3 - ALARM or ALERT 1 to 12 Detectors can be connected to the controller FS7-130-SX FS7-2173 RS-232 PC Communication Model FS7 with FS7-130-SX Controller

17. 17 (1) ALERT Relay – NO (1) FIRE ALARM Relay – NO (1) FAULT Relay – NC (1) 24 VDC Releasing Circuit (1) 24 VDC Annunciator (0.15A) (1) 24 VDC Output (0.1 A) 120 VAC Manual Call Station Contact Device FSWB-1 Junction Box FS7-2173 RS-232 PC Communication Model FS7 Detector with FSWB Controller To Next Junction Box 1 to 9 Detectors can be connected to the controller

18. 18 (1)FAULT Relay – NC Normally Energized (1)ALERT Relay – NO Normally De-Energized (1)FIRE ALARM Relay – NO Normally De-Energized 24 VDC Model FS7-2173-2RP Unitized Fire Detector RS-485 FireBus II™ Protocol to PC

19. 19 Model FS10  For use with Electrostatic Liquid and Powder Paint Applications  NIR / WBIR / VIS  Complies with NFPA 33  Explosion Proof - Indoor use  Unitized, Card Controller or Wallmount Control Panel Systems  FirePic™ with FireBus II RS-485

20. 20  Electrostatic Liquid Paint Spray Line  Electrostatic Powder Coating Booths  Paint Drum Storage & Paint Mix Rooms  Aerosol Filling  Automotive Engine Testing  Infrared Curing Ovens  Diesel Generators (Indoors)  Gas Compressor Stations (Indoors) Model FS10 PRODUCT APPLICATIONS

21. 21 (1)ALERT Relay – NO/NC Normally De-Energized (0.5 sec Response) (1)FIRE ALARM Relay – NO/NC Normally De-Energized (4 sec Response) (1)FAULT Relay – NO/NC Normally Energized (3)PROCESS SHUTDOWN Relays – NO/NC Normally Energized Primary Application: Paint Booths 120 VAC Note: Detector Sensitivity is 15 or 30 Feet RS-232 PC Communication Model FS10 Wallmount Controller

22. 22 (1)MAJOR FAULT – NO/NC Normally Energized (1)FIRE ALARM Relay – NO Normally De-Energized (4 sec Response) (1)MINOR FAULT – NO Normally De-Energized (1) ALERT / FEW Relay NC Normally Energized (0.5 sec Response) Note: Detector Sensitivity: 15 or 30 Feet General Finishing: Liquid & Powder Coating Model 2GF RS-232 PC Communication 120 VAC Model FS10 Card Controller

23. 23 General Finishing: Liquid & Powder Coating (1) FAULT Relay – NC Normally Energized Note: Detector Sensitivity: 15, 30, or 45 Feet, (no ALERT relay with 45 ft. sensitivity) RS-485 FireBus II™ Protocol to PC (1)ALERT Relay – NO Normally De-Energized (0.5 sec Response) (1)FIRE ALARM Relay – NO Normally De-Energized (4 sec Response) 24 VDC Model FS10-R Unitized Detector (Relay Output Version)

24. 24 General Finishing: Liquid & Powder Coating ALARM: 20 Ma (4 sec Response) ALERT: 12 mA (0.3 sec Response) FAULT: 0 mA NORMAL: 4 mA Model FS10-A Unitized Detector (Analog Output Version) Note: Detector Sensitivity: 15, 30, or 45 Feet, (no ALERT relay with 45 ft. sensitivity) 24 VDC RS-485 FireBus II™ Protocol to PC

25. 25 Product Line Review