2. Using KILLEENISDKILLEENISD

3. & the Electronic Test Item Bank KILLEENISDKILLEENISD

4. Eduphoria Aware KILLEENISDKILLEENISD

6. 1 – Click on Tests Tab CREATING AN ASSESSMENT

7. 1 – Click on Create a New Test 2 – Click on Create a new blank test 3 – Click on Next

8. 1 – Enter test title 2 – Select grade level 3 – Click on Next

9. 1 – Select Level 2 – Select subject 3 – Select course 4 – Click on Next

10. 1 – Click on Finish

11. ? Optional…you do not have to enter anything here. Do you want 70% to be Met standard and 100% for Commended?

13. 1. Click on Questions Tab 2. Click on Search Item Bank

14. Click on double blue arrows

15. 1. Highlight SE for which you want test questions 2. Click on Search Item Bank, again

16. Software is pulling up questions pertaining to that particular SE. Wait until Searching is complete.

17. Click on blue down arrow to see test item

18. Click on green plus sign to add test item to test

19. Click on X Close after adding test items to see test

20. Click on Alternate to change F, G, H, J to A, B, C, D.

21. 1. Click on Advanced Tab 2. This is where your Test ID number is that must be bubbled in on your answer key. *

22. Click on Print to: Print Test Booklet Print Test Key These will open as pdf documents which you can print or save to your computer. Just remember that you need both the test (answer) key and the Test ID number to fill out your answer key before scanning answer documents on the Lexmark printer.

23. Click on Share to share the test you created with a fellow teacher. The recipient will need to copy/save the test in order to modify it. The test could then be shared, again, if desired.

24. KILLEENISDKILLEENISD Print student answer documents on your Lexmark printer

25. KILLEENISDKILLEENISD Touch LCD Panel – literally. It will wake up once you touch it (as long as it is powered on, that is).

27. You will have to wait a few seconds while it pulls up information.

28. 1 2

29. 1 2 Building number MUST be entered as a 3-digit number. Use leading zeros if your campus number contains less than 3 digits.

30. 1 2

31. 1 2 Select the periods for which answer documents are to be printed

32. The default is already to select all students in the period chosen. You may deselect all and select individual students, if desired. Just click on next if you want an answer document to print for each student in the period.

33. If you want numeric griddables, chose this one (or one of the top three for elem/MS). If you do not want griddables and only want multiple choice questions, chose this one.

34. You can peck out a name for this test, if you wish. It is optional. This is not required. Maybe use abbreviated name for test.

35. The Lexmark printer will now begin printing your answer documents.

36. If you are finished printing answer documents, leave on ‘No’ and click on Next. You should now have an answer document for each student.

37. 1)Bubble in Answers 2)Bubble in Test ID Number ANSWER KEY

38. 1)Students bubble in ONLY their answers. They do not fill in test ID number. STUDENT ANSWER DOCUMENT

39. KILLEENISDKILLEENISD Go back to the Lexmark printer. Touch LCD Panel to wake up machine.

40. KILLEENISDKILLEENISD Make sure answer key is on top (with answers bubbled in and Test ID number bubbled in). All student answer documents must be facing right direction and placed behind the answer key. Place face up in the ADF (automated document feeder…on top of the Lexmark) and click on Grade Tests. Go to your computer and look for results in Eduphoria!

44. KILLEENISDKILLEENISD

45. Teresa Daugherty Director for Assessment & Accountability Killeen ISD (254) 336-0318 Teresa.Daugherty@killeenisd.org KILLEENISDKILLEENISD