1. Mars Ⅱ Series Presentation

2. CONTENTS 2nd Generation Machine Series Model
MA & MA Ⅱ machine data difference
Clamping Unit
Injection Unit
Control System
Main Components Brand

3. 2nd generation machine series model
MAⅡ/ e
SAⅡ
MA600Ⅱ/130
MA600Ⅱ/130e
SA600Ⅱ/130
MA900Ⅱ/300
MA900Ⅱ/260e
SA900Ⅱ/300
MA1200Ⅱ/410
MA1200Ⅱ/370e
SA1200Ⅱ/410
MA1600Ⅱ/600
MA1600Ⅱ/540e
SA1600Ⅱ/600
MA2000Ⅱ/770
MA2000Ⅱ/700e
SA2000Ⅱ/770
MA2500Ⅱ/1000
MA2500Ⅱ/1000e
SA2500Ⅱ/1000
MA2800Ⅱ/1350
MA2800Ⅱ/1350e
SA2800Ⅱ/1350
MA3200Ⅱ/1700
MA3200Ⅱ/1700e
SA3200Ⅱ/1700
MA3800Ⅱ/2250
MA3800Ⅱ/2250e
SA3800Ⅱ/2250
MA4700Ⅱ/2950
MA4700Ⅱ/2950e
SA4700Ⅱ/2950
MA5300Ⅱ/4500
MA5300Ⅱ/4000e
SA5300Ⅱ/4500
MA6000Ⅱ/4500
SA6000Ⅱ/4500
MA7000Ⅱ/5000
SA7000Ⅱ/5000
MA8000Ⅱ/6800
SA8000Ⅱ/6800
MA9000Ⅱ/6800
SA9000Ⅱ/6800
MA10000Ⅱ/8400
SA10000Ⅱ/8400
Economy
International
International

4. MA & MA Ⅱ machine data difference
screw diameter
Injection Specifications
Only 60T is different, others are the same as former machine model Mars

5. MA & MA Ⅱ machine data difference
Increase 4 holes
●Platen layout
Compared with the former machine model Mars, the ejector layout of 250t and 1000t is different, and the rest models are the same as the former series.

6. MA & MA Ⅱ machine data difference
●Platen layout
Only 250t and 1000t ejector layouts are different,
Other machines are the same as the former Mars.
1000T
Increase 8 holes

7. MA & MA Ⅱ machine data difference
●Robot Mechanical Interface
60T-250T: Haitian Standard.
≥280T: Euro 18

8. Clamping Unit Configuration MA Ⅰ MA Ⅱ Differences Mechanical
Safety Bar
Standard
Optional
60-250T: FP&MP
T: MP&RP
MA Ⅱ
MA Ⅱ

9. Clamping Unit Expansibility Core Puller 700-1000T Core Puller
Configuration
MA Ⅰ
MA Ⅱ
Differences
Core Puller
No reserved T
Two reserved
Expansibility

10. Cooperation with Germany -Intelli Engineering GmbH
Clamping Unit
Clamping Force MA
MAⅡ
Clamping Force Area sketch
Cooperation with Germany
-Intelli Engineering GmbH
Moving Platen

11. Clamping Unit
MA900 vs. MA900Ⅱ Fixed platen
Fixed Platen MA
MAⅡ

12. MP Speed / Clamping Cylinder Speed
Clamping Unit
MAⅡ Toggle System
Moving faster
Institutions more stable
Better reliability
Reducing Dry cycles
MA600～2500Ⅱ
MA3200～10000Ⅱ
Transmission Ratio
MP Speed / Clamping Cylinder Speed

13. Clamping Unit Grease Oil Oil Configuration MA Ⅰ MA Ⅱ Differences
Material of Bushing
Steel Bushing
Copper Bushing
Graphite Steel Bushing
Graphite Copper Bushing
Improve Lubrication Performance
Cleanliness
Grease
Oil
Oil

14. Quantitative distributor Damping formula distributor
Clamping Unit
Adequate Lubrication
Less Overflow
Neat and Clean
Built-in Parameters
Quantitative distributor
Damping formula distributor

15. Convenience for customers
Clamping Unit
Width
Configuration
MA Ⅰ
MA Ⅱ
Differences
Operating space
Traditional position
（T60-T250）
Move the lower rail
Convenience for customers

16. Clamping Unit New Safety Standards Configuration MA Ⅰ MA Ⅱ Differences
Alarm lamp position
Injection unit
（T60-T250）
Move to the clamping unit
Convenience for customers unified management

17. machine frame structure stress more reasonable
Clamping Unit
machine frame structure
MA2000 Ⅱ
MA2000
MA600～2500Ⅱ
stress more reasonable
rigidity better

18. Stable performance & long life expectancy
Injection Unit
Configuration
MA Ⅰ
MA Ⅱ
Differences
Guide bar steadier
Guide rod
（T90-T600）
All integral
（boat form）
rigidity better
Increase IMM
Stable performance & long life expectancy
MAⅡ

19. More convenience for maintenance and replace of the screw
Injection Unit
Configuration
MA Ⅰ
MA Ⅱ
Differences
Screw Connection Mode
Straight Key
Multiple Spline
（T60-T470）
The spline drives more reliable
More convenience for maintenance
and replace of the screw
Smooth Transmission
Washer
Coupling
Pre - plasticizing hydraulic motor
Splined connector
Split-ring
Screw

20. Injection Unit
Washer
Washer
Splined Connector
Split ring

21. More accurate temperature detection
Injection Unit
Configuration
MA Ⅰ
MA Ⅱ
Differences
Nozzle
Thermocouple
Screw type
Needle type
More accurate temperature detection
Easy maintenance
Quick Response
High precision

22. Stress more reasonable
Injection Unit
MA3200～10000Ⅱ Machine Frame Structure
MA3200～10000Ⅱ
Stress more reasonable
rigidity better

23. Control Systems ■ MA600Ⅱ-MA2500Ⅱ Techmation: AK680+10”LCD
■ MA7000Ⅱ-MA10000Ⅱ Techmation: C ”LCD
□ MA600Ⅱe-MA5300Ⅱe Techmation: AK ”LCD
MA Ⅱ International
MA Ⅱ Economy

24. Increase the Safety Level
Control System
Increase the Safety Level

25. Control Systems Heating Circuit
Add one heating contactor for heating circuit ,
When actual temperature reach to 450℃.
This contactor will switch off for protect barrel.

26. Control Systems Charge*:
Program Control
Mold Adjust Manual
Semi-Automatic Fully Automatic
Auto Mold Adjust MA
MAⅡ
Non Operation Door Open Switch Off
Mold Closing
Mold Closing Motor
Any action Turn to Manual
Motor Turn to Manual
Operation Door Open Switch Off
Mold Closing Injection Nozzle forward Charge* Mold Adjust Forward
Mold Closing Injection Nozzle forward Turn to Manual
Purge Cover Open Switch Off
Injection
Injection Nozzle Forward Charge
Injection Nozzle Forward Charge Turn to Manual /
Charge*:
This action can be by pass through the function selection in the screen

27. Control System Techmation KEBA FUJI Charge*:
Program Control
Techmation
KEBA
FUJI
Charge*:
This action can be by pass through the function selection in the screen

28. Main Components Brands
Components Name
MAⅡ
MAⅡ/e
Mold Height adjusted motor
WHITE / USA
Eaton / USA
Oil Level Gauge
Stauff / Germany
*/CHINA
Controller
Techmation / Taiwan, China
Techmation/ Taiwan, China
Heating Parts
Sino-Foreign Joint Venture
CHINT+FUJI (China)
Miniature Breaker
Sino-foreign joint venture
CHINT
Suction Filter
MP FILTRI/ITALY
CHINA
Back Pressure Pilot Valve
≤250T JILI / Taiwan, China
280T-470TYUNEN (Taiwan, China)
≥530T Bosch / Germany
≤250TJILI/ Taiwan, China
280T-470TYUKEN (Taiwan, China)
530T Bosch / Germany
System Relief Valve
60T-120T BOSCH / Germany
160T-1000T YUKEN (Taiwan, China) or Vickers
≤120T BOSCH / Germany
≥160Tnorthern or YUKEN (Taiwan, China)
Inverter
KEB / Germany
Position Transducer
NOVOtechnik / Germany
MA Ⅱ International
MA Ⅱ Economy

29. Thank You
For your attending