Presentation on theme: "Industrial Ethernet Extender IVC-2004PT. Presentation Outline What is Ethernet Extender ? Product Overview Product Benefits Product Features "— Presentation transcript:
Industrial Ethernet Extender IVC-2004PT
Presentation Outline What is Ethernet Extender ? Product Overview Product Benefits Product Features Application Comparison
What is Ethernet Extender ? The Limitation of Twisted-pair UTP cable TIA/EIA 568b1 : Maximum segment length 100 meters (328 feet). IP Camera or Wireless AP Ethernet Switch 100m Only 100 meter maximum cable length is not able to meet a wide range of IP Surveillance / Wireless AP deployment. Data UTP Cable
Long Reach ability (max.) of transmission media: 1.x km 120km 100m Coaxial Fiber UTP Wireless 40m ~ x km What is Ethernet Extender ?
PLANET Industrial Ethernet Extender Solution Break 100-meter Ethernet limit of UTP cable Utilize exist transmission media: Phone Wire Coaxial Cable PLANET Ethernet Extender solution offers the absolute fastest possible data transmission speeds over existing copper telephone lines or coaxial cable without the need for rewiring. It is based on two core networking technologies: Ethernet (IEEE and IEEE 802.3u) VDSL2 (Very-high-data-rate Digital Subscriber Line 2) What is Ethernet Extender ?
Product Overview Front Panel of IVC-2004PT Front Panel of IVC-2004PT Extender Port 1 BNC female connector VDSL2 Port, link with BNC, RG58 and RG 6 coaxial cable 1 RJ-11 VDSL2 Port, link with Telephone Wire Local LAN Port with PoE 4 x RJ-45 10/100TX TP ports 6-Pin Removable Terminal Block Redundant 12 ~ 48V DC power input 48V DC for PoE Function BNC Female Connector 10/100Mbps LNK/ACT / PoE In-Use LED for TP port Power 1 & 2, Fault, VDSL2 Signal LED 4 Position DIP Switch RJ-11 Female Connector
Product Overview – DIP Switch DIP-1DIP-2DIP-3DIP-4 ModeChannelBand PlanSNR OFFMasterInterleaveSymm9dB ON (default)SlaveFastAsymm6dB Master / Salve Master (Central Office): the Master device mode, usually the Master device will be located at the data center of ISP or enterprise to link to the backbone. Slave (Customer Premises Equipment): the Slave device mode, usually the Slave device will be located at branch office, home or remote side as the long reach data receiver. The Slave also can be connected to the PC, IP Camera or wireless Access Point. Fast and Interleave mode Fast Mode: guarantees a minimum end to end latency less than 1 ms. Interleaved mode: provides impulse noises protection with a duration less than 250 us. Interleaved mode has a maximum end to end latency of 10m sec.
Product Overview – DIP Switch DIP-1DIP-2DIP-3DIP-4 ModeChannelBand PlanSNR OFFMasterInterleaveSymm9dB ON (default)SlaveFastAsymm6dB Band Plan User can switch the Band Plan either Symmetric or Asymmetric by their own. When Symmetric is selected that provides better upstream performance, when Asymmetric is selected that provides better downstream performance. Refer to table above for details. Target SNR (Signal Noise Ratio) Margin When fixed SNR margin is selected, the system will maintain the SNR margin at 9 dB across all usable loop length.
Product Overview – IVC-2004PT Three View Drawing
Product Overview If want to extend the distance, why not to just using the VC-201A, VC-204 or VC-202A? IVC-2004PT: Auto Adaptive Coaxial or RJ-11 Connective Wide Range of Operating Temperature -40 to 75 Degree C IEEE 802.3af Power over Ethernet Standard Conformance of Industrial Design Redundant 12 to 48V DC Power Input IP- 30 Aluminum Metal Case DIN-Rail and Wall Mount Installation
Key Features PoE IEEE 802.3af BNC + RJ-11 Connection Redundant Power -40~75 Degree C IP-30 Aluminum Metal Case Up to 2.4km Up to 1.4km
Product Features Power over Ethernet Complies with IEEE 802.3af Power over Ethernet End-Span PSE Up to 4 IEEE 802.3af devices powered Supports PoE Power up to 15.4 Watts for each PoE port Auto detect powered device (PD) Circuit protection prevent power interference between ports Remote power feeding up to 100m PoE function must use 48V DC. If power source is lower than 48V DC, the 802.af PoE function will not be activated. However, it will not influence the VDSL2 and 4-ports TP operation.
PoE Splitter PoE IP Surveillance Product Features - PoE PoE Wireless AP 48V DC Input Manufactory Non-PoE equipment
PoE Splitter PoE IP Surveillance PoE Wireless AP Product Features – Fiber Optic Link Coaxial Cable or Telephone Wire Coaxial (BNC) Distance extend from 200m to 2.4km Phone Wire(RJ-11)Distance extend from 200m to 1.4km Coaxial Up to 2.4km Phone Wire Up to 1.4km IVC-2004PT
Product Benefits Optional Ethernet Distance extension either Coaxial or RJ-11 Coaxial: RJ-11 Easily deployment in Heavy Industrial demanding environments -40 to 75 Degree C operation temperature 12V DC to 48V DC voltages input IP-30 Aluminum metal shape Protection: 6KV DC EFT protection for power line 6KV DC Ethernet ESD protection Easy Installation – without Software Configuration Compatible with PLANET IVC-2002, VC-202A and VC-201A 21/10Mbps28/2Mbps2.4Km 91/99Mbps99/63Mbps200m SymmetricAsymmetric 19/13Mbps31/4Mbps2.4Km 95/99Mbps99/65Mbps200m SymmetricAsymmetric
Industrial Conformance 12 to 48V DC, redundant power Polarity reverse protect function Connective removable terminal block for master and slave power Relay alarm for power failure -40 to 75 Degree C operation temperature IP-30 Aluminum metal case Stability testing with IEC (Free fall) IEC (Shock) IEC (Vibration) Product Features
Wide-range redundant power design PWR1 & PWR2 12 to 48V DC redundant power input Relay alarm for power down and port down Power polarity reverse protect Connective removable terminal block for primary and backup power
Product Features Real-Time Fault Relay Alarm Power 1 - Master - Power 2 - Backup - Warning Light or Speaker Warning Power FAIL
Product Features Hardware Extender Port: Auto Adaptive Coaxial or RJ-11 Connective PoE LAN Port: 4-Port 10/100Mbps copper LAN ports with PoE Auto Negotiation and Auto MDI/MDI-X function Per port LED Status Monitoring for system diagnostic Layer 2 Switching: Store-and-Forward Switch Architecture Back pressure for Half Duplex, IEEE 802.3x for Full Duplex Flow Control 2K MAC Address, Auto aging and learning Support up to 1536 bytes packet size, 802.1Q VLAN tag transparent One terminal block connector within two DC power inputs. DIN Rail and Wall Mount Design for fill installation demand in Heavy Industrial environments
Installation – IVC-2004PT BNC / RJ-11 Proper Connection PLANET Industrial Ethernet Extender has a DIP switch which can adjust to be Master or Slave mode. Connection of two PLANET PoE Industrial Ethernet Extenders, one must be Master (CO) mode and the other one must be Slave (CPE) mode. Telephone Wire Up to 1.4km UTP cable Coaxial Cable Up to 2.4km Master Slave
Application Flexible Industrial Extender integrates BNC and RJ-11 Connection IVC-2004PT temperature range is from -40 to 75 Degree C which can handle any harsh environment and places. It also compatibles with PLANET IVC-2002, VC-201A and VC-202A Without spend extra cost to deploy a new local intranet in apartment, hotel, campus and hospitality environment. For example, MC-700, MC-1500 and MC-1500R chassis with VC-201A and VC-202A inside and set it as CPE (Customer Premises Equipment) mode which placed in the wiring center (MDF room). On the other hand, connects an IVC-2004PT extender with Master mode by using telephone line or coaxial cable.
Application Power over Ethernet, up to 15.4 watts Long Reach Ethernet, up to 2.4km
Target Markets Tender Market (Public construction) IP Surveillance System Integrator IE Distributor Manufactory Transportation Hospital / Bank Target Customers Who buys PLANET Industrial Ethernet Switch: ISW-5x4PT/PS series, ISW-1022MPT, ISW-511T, IGS-801, IFT-802 and etc. Who buys PLANET VDSL Ethernet Media Converter: VC-202, VC-202A, VC-204 and etc.. Who buys PLANET PoE Power Source Equipment (PSE) or Powered Device (PD): FGSW-2620PVM, FGSD-1022P, FSD-804PS, POE-151, POE-151S, etc. Who buys PoE IP cameras PLANET ICA-HM230, ICA-H312, ICA-HM135, ICA-HM350 and etc. Who buys PoE Wireless Access points PLANET WNAP-1120PE, WAP-4033PE, WNAP-3000PE Appendix Sales Target
Relative Products: IVC Port 10/100Base-TX + 1-Port BNC / RJ-11 Industrial Ethernet Extender (-40 ~ 75 Degree C) VC-201A - Ethernet over VDSL2 Converter (1*RJ-45, 1*VDSL2 / RJ-11, 1*Phone-17a) VC-202A - Ethernet over Coaxial Converter (1*RJ-45 and 1*BNC-17a) Appendix
Available DIN-Rail Power Supply: PWR W 24V DC Industrial DIN Rail Power Supply (-20 ~ 70 Degree C) PWR W 24V DC Industrial DIN Rail Power Supply (-10 ~ 60 Degree C) PWR W 48V DC Industrial DIN Rail Power Supply (-10 ~ 60 Degree C) PWR W 48V DC Industrial DIN Rail Power Supply (-10 ~ 60 Degree C) Appendix
Relative PoE Product: POE Splitter / Extender POE-151S IEEE 802.3af Power over Ethernet Splitter with 5V / 12V DC output POE-E101 IEEE 802.3af Power over Ethernet Extender Appendix Non-PoE IP CameraPoE Splitter DATA + Power 48V DC DATA Power 12V DC 100m PoE Extender
Relative PoE Product: IP Surveillance ICA-H312 H meter IR Internet Camera ICA-HM125 2 Mega-Pixel H.264 Box IP Camera ICA-HM126 H.264 Full HD Box IP Camera ICA-HM131 H.264 Full-HD Fixed Dome IP Camera ICA-HM135 H.264 Mega-Pixel 20M IR Vandal Proof Dome IP Camera ICA-HM240 H.264 Mega-Pixel Vandal Proof Pan/Tilt IP Camera Appendix
Relative PoE Product: Wireless Access Point WNAP-1120PE n Wireless Access Point with PoE WNAP-3000PE n Enterprise PoE Access Point WAP-4033PE 54Mbps Wireless PoE Access Point MAP a/b/g Outdoor MESH Access Point Appendix